Analysis of ground reaction force and electromyographic activity of the gastrocnemius muscle during double support

O documento em anexo encontra-se na versão post-print (versão corrigida pelo editor).

Comparative analysis of the ground reaction forces, during the support phase, in a group of pregnant women on their 3rd trimester of pregnancy and in a group of not pregnant women

PURPOSE: To analyze and compare the Ground Reaction Forces (GRF), during the stance phase of walking in pregnant women in the 3rd trimester of pregnancy, and non pregnant women. METHODS: 20 women, 10 pregnant and 10 non pregnant, voluntarily took part in this study. GRF were measured (1000 Hz) using a force platform (BERTEC 4060-15), an amplifier (BERTEC AM 6300) and an analogical-digital converter of 16 Bits (Biopac). RESULTS: The study showed that there were significant differences among the two groups concerning absolute values of time of the stance phase. In what concerns to the normalized values the most significant differences were verified in the maximums values of vertical force (Fz3, Fz1) and in the impulse of the antero-posterior force (Fy2), taxes of growth of the vertical force, and in the period of time for the antero-posterior force (Fy) be null. CONCLUSIONS: It is easier for the pregnant to continue forward movement (push-off phase). O smaller growth rates in what concerns to the maximum of the vertical force (Fz1) for the pregnant, can be associated with a slower speed of gait, as an adaptation strategy to maintain the balance, to compensate the alterations in the position of her center of gravity due to the load increase. The data related to the antero-posterior component of the force (Fy), shows that there is a significant difference between the pregnant woman’s left foot and right foot, which accuses a different functional behavior in each one of the feet, during the propulsion phase (TS).

Ground reaction forces and plantar pressure distribution during occasional loaded gait

This study compared the ground reaction forces (GRF) and plantar pressures between unloaded and occasional loaded gait. The GRF and plantar pressures of 60 participants were recorded during unloaded gait and occasional loaded gait (wearing a backpack that raised their body mass index to 30); this load criterion was adopted because is considered potentially harmful in permanent loaded gait (obese people). The results indicate an overall increase (absolute values) of GRF and plantar pressures during occasional loaded gait (p < 0.05); also, higher normalized (by total weight) values in the medial midfoot and toes, and lower values in the lateral rearfoot region were observed. During loaded gait the magnitude of the vertical GRF (impact and thrust maximum) decreased and the shear forces increased more than did the proportion of the load (normalized values). These data suggest a different pattern of GRF and plantar pressure distribution during occasional loaded compared to unloaded gait.

In-shoe plantar pressures and ground reaction forces during overweight adults' overground walking

Purpose: Because walking is highly recommended for prevention and treatment of obesity and some of its biomechanical aspects are not clearly understood for overweight people, we compared the absolute and normalized ground reaction forces (GRF), plantar pressures, and temporal parameters of normal-weight and overweight participants during overground walking. Method: A force plate and an in-shoe pressure system were used to record GRF, plantar pressures (foot divided in 10 regions), and temporal parameters of 17 overweight adults and 17 gender-matched normal-weight adults while walking. Results: With high effect sizes, the overweight participants showed higher absolute medial-lateral and vertical GRF and pressure peaks in the central rearfoot, lateral midfoot, and lateral and central forefoot. However, analyzing normalized (scaled to body weight) data, the overweight participants showed lower vertical and anterior-posterior GRF and lower pressure peaks in the medial rearfoot and hallux, but the lateral forefoot peaks continued to be greater compared with normal-weight participants. Time of occurrence of medial-lateral GRF and pressure peaks in the midfoot occurred later in overweight individuals. Conclusions: The overweight participants adapted their gait pattern to minimize the consequences of the higher vertical and propulsive GRF in their musculoskeletal system. However, they were not able to improve their balance as indicated by medial-lateral GRF. The overweight participants showed higher absolute pressure peaks in 4 out of 10 foot regions. Furthermore, the normalized data suggest that the lateral forefoot in overweight adults was loaded more than the proportion of their extra weight, while the hallux and medial rearfoot were seemingly protected.

Sistema visual para Ground Truth de sistemas autónomos

Este trabalho visa contribuir para o desenvolvimento de um sistema de visão multi-câmara para determinação da localização, atitude e seguimento de múltiplos objectos, para ser utilizado na unidade de robótica do INESCTEC, e resulta da necessidade de ter informação externa exacta que sirva de referência no estudo, caracterização e desenvolvimento de algoritmos de localização, navegação e controlo de vários sistemas autónomos. Com base na caracterização dos veículos autónomos existentes na unidade de robótica do INESCTEC e na análise dos seus cenários de operação, foi efectuado o levantamento de requisitos para o sistema a desenvolver. Foram estudados os fundamentos teóricos, necessários ao desenvolvimento do sistema, em temas relacionados com visão computacional, métodos de estimação e associação de dados para problemas de seguimento de múltiplos objectos . Foi proposta uma arquitectura para o sistema global que endereça os vários requisitos identi cados, permitindo a utilização de múltiplas câmaras e suportando o seguimento de múltiplos objectos, com ou sem marcadores. Foram implementados e validados componentes da arquitectura proposta e integrados num sistema para validação, focando na localização e seguimento de múltiplos objectos com marcadores luminosos à base de Light-Emitting Diodes (LEDs). Nomeadamente, os módulos para a identi cação dos pontos de interesse na imagem, técnicas para agrupar os vários pontos de interesse de cada objecto e efectuar a correspondência das medidas obtidas pelas várias câmaras, método para a determinação da posição e atitude dos objectos, ltro para seguimento de múltiplos objectos. Foram realizados testes para validação e a nação do sistema implementado que demonstram que a solução encontrada vai de encontro aos requisitos, e foram identi cadas as linhas de trabalho para a continuação do desenvolvimento do sistema global.

Road drivers performance appraisal using a MCDA method: a case study in the road transport company

Performance evaluation increasingly assumes a more important role in any organizational environment. In the transport area, the drivers are the company’s image and for this reason it is important to develop and increase their performance and commitment to the company goals. This evaluation can be used to motivate driver to improve their performance and to discover training needs. This work aims to create a performance appraisal evaluation model of the drivers based on the multi-criteria decision aid methodology. The MMASSI (Multicriteria Methodology to Support Selection of Information Systems) methodology was adapted by using a template supporting the evaluation according to the freight transportation company in study. The evaluation process involved all drivers (collaborators being evaluated), their supervisors and the company management. The final output is a ranking of the drivers, based on their performance, for each one of the scenarios used.

Projeto Alternativo ao Nó de Ligação do Pópulo

O presente trabalho visa, o estudo e a elaboração de um projeto de execução de um Nó de Ligação em trevo completo. O projeto requer um estudo cuidado da geometria das estradas principais existentes, das características do terreno e de todas as restantes condicionantes que se impõe à realização do mesmo. Esta fase do projeto é decisiva para o desenvolvimento e o sucesso do projeto, nos diversos aspetos técnicos, económicos e ambientais relacionados. Após o enquadramento do nó de ligação em trevo no terreno, procedeu-se à localização dos quatro ramos de ligação direta, ao seu traçado geométrico e as ligações às estradas principais. Seguidamente, realizou-se o traçado de todos os restabelecimentos necessários para a circulação nas vias pré-existentes e o seu acesso ao nó. Este trabalho foi realizado aplicando todos os conhecimentos adquiridos na Licenciatura em Engenharia Civil e no Mestrado em Engenharia Civil no Ramo das Infraestruturas e Ambiente no ISEP, com especial importância em Vias de Comunicação e Infraestruturas de Transportes. Todos os procedimentos de definição geométrica e analítica do nó de ligação em trevo foram realizados recorrendo ao programa para computador “AutoCAD Civil 2013”.

The transport of carboxylic acids and important role of the Jen1p transporter during the development of yeast colonies

On solid substrates, yeast colonies pass through distinct developmental phases characterized by the changes in pH of their surroundings from acidic to nearly alkaline and vice versa. At the beginning of the alkali phase colonies start to produce ammonia, which functions as a quorum-sensing molecule inducing the reprogramming of cell metabolism. Such reprogramming includes, among others, the activation of several plasma membrane transporters and is connected with colony differentiation. In the present study, we show that colony cells can use two transport mechanisms to import lactic acid: a ‘saturable’ component of the transport, which requires the presence of a functional Jen1p transporter, and a ‘non-saturable’ component (diffusion) that is independent of Jen1p. During colony development, the efficiency of both transport components changes similarly in central and outer colonial cells. Although the lactate uptake capacity of central cells gradually decreases during colony development, the lactate uptake capacity of outer cells peaks during the alkali phase and is also kept relatively high in the second acidic phase. This lactate uptake profile correlates with the localization of the Jen1p transporter to the plasma membrane of colony cells. Both lactic acid uptake mechanisms are diminished in sok2 colonies where JEN1 expression is decreased. The Sok2p transcription factor may therefore be involved in the regulation of non-saturable lactic acid uptake in yeast colonies.

Reabilitação do Aeroporto de Ondjiva em Angola

Com o progresso da tecnologia aeronáutica, a deslocação de pessoas e bens tornou-se bastante acessível para variados pontos de mundo, com espaço de tempo muito reduzido. Um dos motores essenciais deste avanço, concernente à mobilidade, é o transporte aéreo e a sua evolução. Este tipo de transporte requer a máxima segurança, sendo que um único acidente pode gerar centenas de vítimas. Atendendo a estas condições, a qualidade dos pavimentos aeroportuários é de grande importância para a segurança da movimentação das aeronaves em solo. Mas, por razões económicas e por vezes de espaço, perspetivas de novas construções perdem viabilidade comparativamente a soluções de reabilitação. A posição geográfica do aeroporto de Ondjiva faz com que seja um importante ponto de passagem entre a África do Sul e a Namíbia e, prevê-se que o número de voos que se efetuam no aeroporto cresça, sendo que o país está numa fase de grande evolução. O presente trabalho visa o conhecimento do processo de dimensionamento para pavimentos aeroportuários e soluções de correção para anomalias que possam apresentar, aplicando-os ao aeroporto de Ondjiva, em Angola. Atualmente, o aeroporto revela um grande desgaste das pistas de táxi, inadaptabilidade das cabeceiras face às cargas estáticas a que são submetidas e, largura insuficiente da pista para a aeronave de projeto, ou aeronave crítica, atendendo ao regulamento da ICAO (International Civil Aviation Organization). Para melhorar o conforto, a segurança e eficiência dos serviços aéreos, o dimensionamento do aeroporto deve obedecer aos princípios e regras da ICAO. Pretende-se também a modelação de uma solução de reforço para o pavimento existente, para que não seja necessário construir um aeroporto de raiz, minimizando custos. Após a realização do dimensionamento, foi estudada a sinalização horizontal e luminosa da pista, para que esteja em conformidade com as suas novas medidas.

Short sea como alternativa ao transporte terrestre

O Short Sea Shipping (SSS) é um conceito de transporte marítimo de difícil definição. No entanto, considera-se neste trabalho, que corresponde ao movimento de carga e passageiros por mar entre portos situados geográficamente na Europa ou entre outros portos que não estejam situados na Europa, mas que partilham costa com mares que banham a Europa. Esta definição é sem dúvida aquela que melhor se adequa à inclusão do Short SSS como elo de uma cadeia multimodal de transporte de mercadorias no espaço Europeu, e como alternativa ao transporte de mercadorias apenas por estrada. Este trabalho aborda alguns conceitos importantes subjacentes ao transporte marítimo de forma a permitir uma contextualização que possibilite uma melhor compreensão da abordagem feita ao SSS. A sua promoção e implementação, como alternativa viável para o transporte de mercadorias dentro do espaço Europeu, são objetivos da política de transportes da União Europeia (UE). Este trabalho reflete sobre algumas das políticas estratégicas de promoção da UE para impulsionar o SSS como alternativa ao transporte rodoviário. O objetivo deste trabalho é analisar se o SSS é uma alternativa ao transporte terrestre, no contexto de uma distribuição no Reino Unido de produtos de uma Industria localizada nos arredores da cidade do Porto. Neste trabalho analisou-se as vantagens e desvantagens do SSS, foi efetuada uma descrição do Porto de Leixões como porto escolhido para as expedições, assim como uma análise descritiva dos serviços de Short Sea disponiveis neste porto para as zonas de distribuição desta empresa. Foram descritos os fatores chave da mudança de transporte terrestre para SSS, efectuada uma caracterização da distribuição desta empresa e da solução que esta adotou para distribuir os seus produtos no Reino Unido. A anállise económica da operação, dos tempos de trânsito são dois temas fundamentais para a viabilidade da solução como alternativa ao transporte terrestre.

A learning environment for robotic production line simulation

This paper presents a framework for a robotic production line simulation learning environment using Autonomous Ground Vehicles (AGV). An eLearning platform is used as interface with the simulator. The objective is to introduce students to the production robotics area using a familiar tool, an eLearning platform, and a framework that simulates a production line using AGVs. This framework allows students to learn about robotics but also about several areas of industrial management engineering without requiring an extensive prior knowledge on the robotics area. The robotic production line simulation learning environment simulates a production environment using AGVs to transport materials to and from the production line. The simulator allows students to validate the AGV dynamics and provides information about the whole materials supplying system which includes: supply times, route optimization and inventory management. The students are required to address several topics such as: sensors, actuators, controllers and an high level management and optimization software. This simulator was developed with a known open source tool from robotics community: Player/Stage. This tool was extended with several add-ons so that students can be able to interact with a complex simulation environment. These add-ons include an abstraction communication layer that performs events provided by the database server which is programmed by the students. An eLearning platform is used as interface between the students and the simulator. The students can visualize the effects of their instructions/programming in the simulator that they can access via the eLearning platform. The proposed framework aims to allow students from different backgrounds to fully experience robotics in practice by suppressing the huge gap between theory and practice that exists in robotics. Using an eLearning platform eliminates installation problems that can occur from different computers software distribution and makes the simulator accessible by all students at school and at home.

TIGRE - An autonomous ground robot for outdoor exploration

13th International Conference on Autonomous Robot Systems (Robotica), 2013

Real-Time Visual Ground-Truth System for Indoor Robotic Applications

The robotics community is concerned with the ability to infer and compare the results from researchers in areas such as vision perception and multi-robot cooperative behavior. To accomplish that task, this paper proposes a real-time indoor visual ground truth system capable of providing accuracy with at least more magnitude than the precision of the algorithm to be evaluated. A multi-camera architecture is proposed under the ROS (Robot Operating System) framework to estimate the 3D position of objects and the implementation and results were contextualized to the Robocup Middle Size League scenario.

Calibration Method for Underwater Visual Ground-Truth System

This work presents an automatic calibration method for a vision based external underwater ground-truth positioning system. These systems are a relevant tool in benchmarking and assessing the quality of research in underwater robotics applications. A stereo vision system can in suitable environments such as test tanks or in clear water conditions provide accurate position with low cost and flexible operation. In this work we present a two step extrinsic camera parameter calibration procedure in order to reduce the setup time and provide accurate results. The proposed method uses a planar homography decomposition in order to determine the relative camera poses and the determination of vanishing points of detected lines in the image to obtain the global pose of the stereo rig in the reference frame. This method was applied to our external vision based ground-truth at the INESC TEC/Robotics test tank. Results are presented in comparison with an precise calibration performed using points obtained from an accurate 3D LIDAR modelling of the environment.

The influence of gait cadence on the ground reaction forces and plantar pressures during load carriage of young adults

Biomechanical gait parameters—ground reaction forces (GRFs) and plantar pressures—during load carriage of young adults were compared at a low gait cadence and a high gait cadence. Differences between load carriage and normal walking during both gait cadences were also assessed. A force plate and an in-shoe plantar pressure system were used to assess 60 adults while they were walking either normally (unloaded condition) or wearing a backpack (loaded condition) at low (70 steps per minute) and high gait cadences (120 steps per minute). GRF and plantar pressure peaks were scaled to body weight (or body weight plus backpack weight). With medium to high effect sizes we found greater anterior-posterior and vertical GRFs and greater plantar pressure peaks in the rearfoot, forefoot and hallux when the participants walked carrying a backpack at high gait cadences compared to walking at low gait cadences. Differences between loaded and unloaded conditions in both gait cadences were also observed.