Multiprocessor platform using LEON3 processor

The recent advances in embedded systems world, lead us to more complex systems with application specific blocks (IP cores), the System on Chip (SoC) devices. A good example of these complex devices can be encountered in the cell phones that can have image processing cores, communication cores, memory card cores, and others. The need of augmenting systems’ processing performance with lowest power, leads to a concept of Multiprocessor System on Chip (MSoC) in which the execution of multiple tasks can be distributed along various processors. This thesis intends to address the creation of a synthesizable multiprocessing system to be placed in a FPGA device, providing a good flexibility to tailor the system to a specific application. To deliver a multiprocessing system, will be used the synthesisable 32-bit SPARC V8 compliant, LEON3 processor.

Seguimento de plataformas móveis

Este relatório apresenta o trabalho realizado no âmbito da unidade curricular de Tese/Dissertação do Mestrado em Engenharia Electrotécnica e de Computadores - área de especialização de Telecomunicações. Pretende-se desenvolver um sistema distribuído de seguimento, no exterior, de plataformas móveis equipadas com receptores de baixo custo. O sistema deve, em tempo útil, realizar a aquisição, descodificação e tratamento dos dados emiti- dos pelo Global Navigation Satellite System (GNSS), das observações efectuadas pelo receptor e da informação proveniente do European Geostationary Navigation Overlay System (EGNOS). O objectivo é determinar, a partir deste conjunto de informação e para cada plataforma ligada, a posição em modo absoluto, as correcções diferenciais e, finalmente, a posição em modo diferencial. Optou-se por receber as correcções diferenciais de área alargada do EGNOS através da Internet, permitindo, assim, que receptores sem capacidade de receber directamente informação do EGNOS possam também usufruir desta fonte de informação complementar. As correcções diferenciais a aplicar às observações de cada receptor são geradas através do conceito de estacão de referência virtual - Virtual Reference Station (VRS) - a partir da posição aproximada do receptor e das correcções de área alargada provenientes do EGNOS. A determinação da posição em modo diferencial das plataformas móveis é efectuada segundo o conceito de Inverted Di®erential Global Navigation Satellite System (IDGNSS) e utilizando uma arquitectura do tipo Cliente-Servidor. Por último, os resultados, que são armazenados numa base de dados, são disponibilizados ao utilizador através de uma aplicação Web. O utilizador pode, assim, efectuar o seguimento de qualquer plataforma móvel ligada ao sistema a partir de qualquer dispositivo com navegador e acesso à Internet.

Implementação de um sistema seguro, robusto e redundante

Um dos temas mais debatidos na sociedade actual é a segurança. Os níveis de segurança e as ferramentas para os alcançar entram em contraponto com os métodos usados para os quebrar. Como no passado, a razão qualidade/serviço mantém-se hoje, e manter-se-á no futuro, assegurando maior segurança àqueles que melhor se protejam. Problemas simples da vida real como furtos ou uso de falsa identidade assumem no meio informático uma forma rápida e por vezes indetectável de crime organizado. Neste estudo são investigados métodos sociais e aplicações informáticas comuns para quebrar a segurança de um sistema informático genérico. Desta forma, e havendo um entendimento sobre o Modus Operandi das entidades mal-intencionadas, poderá comprovar-se a instabilidade e insegurança de um sistema informático, e, posteriormente, actuar sobre o mesmo de tal forma que fique colocado numa posição da segurança que, podendo não ser infalível, poderá estar muito melhorada. Um dos objectivos fulcrais deste trabalho é conseguir implementar e configurar um sistema completo através de um estudo de soluções de mercado, gratuitas ou comerciais, a nível da implementação de um sistema em rede com todos os serviços comuns instalados, i.e., um pacote “chave na mão” com serviços de máquinas, sistema operativo, aplicações, funcionamento em rede com serviços de correio electrónico, gestão empresarial, anti-vírus, firewall, entre outros. Será possível então evidenciar uma instância de um sistema funcional, seguro e com os serviços necessários a um sistema actual, sem recurso a terceiros, e sujeito a um conjunto de testes que contribuem para o reforço da segurança.

Uma aplicação de gestão de redes baseada no paradigma dos agentes móveis

A massificação da utilização das tecnologias de informação e da Internet para os mais variados fins, e nas mais diversas áreas, criou problemas de gestão das infra-estruturas de informática, ímpares até ao momento. A gestão de redes informáticas converteu-se num factor vital para uma rede a operar de forma eficiente, produtiva e lucrativa. No entanto, a maioria dos sistemas são baseados no Simple Network Management Protocol (SNMP), assente no modelo cliente-servidor e com um paradigma centralizado. Desta forma subsiste sempre um servidor central que colecta e analisa dados provenientes dos diferentes elementos dispersos pela rede. Sendo que os dados de gestão estão armazenados em bases de dados de gestão ou Management Information Bases (MIB’s) localizadas nos diversos elementos da rede. O actual modelo de gestão baseado no SNMP não tem conseguido dar a resposta exigida. Pelo que, existe a necessidade de se estudar e utilizar novos paradigmas de maneira a que se possa encontrar uma nova abordagem capaz de aumentar a fiabilidade e a performance da gestão de redes. Neste trabalho pretende-se discutir os problemas existentes na abordagem tradicional de gestão de redes, procurando demonstrar a utilidade e as vantagens da utilização de uma abordagem baseada em Agentes móveis. Paralelamente, propõe-se uma arquitectura baseada em Agentes móveis para um sistema de gestão a utilizar num caso real.

Chlormequat selective electrodes: construction, evaluation and application at FIA systems

A flow injection analysis (FIA) system having a chlormequat selective electrode is proposed. Several electrodes with poly(vinyl chloride) based membranes were constructed for this purpose. Comparative characterization suggestedthe use of membrane with chlormequat tetraphenylborate and dibutylphthalate. On a single-line FIA set-up, operating with 1x10-2 mol L-1 ionic strength and 6.3 pH, calibration curves presented slopes of 53.6±0.4mV decade-1 within 5.0x10-6 and1.0x10-3 mol L-1, andsquaredcorrelation coefficients >0.9953. The detection limit was 2.2x10-6 mol L-1 and the repeatability equal to ±0.68mV (0.7%). A dual-channel FIA manifold was therefore constructed, enabling automatic attainment of previous ionic strength andpH conditions and thus eliminating sample preparation steps. Slopes of 45.5±0.2mV decade -1 along a concentration range of 8.0x10-6 to 1.0x10-3 mol L-1 with a repeatability ±0.4mV (0.69%) were obtained. Analyses of real samples were performed, and recovery gave results ranging from 96.6 to 101.1%.

A distributed system for learning programming on-line

Several Web-based on-line judges or on-line programming trainers have been developed in order to allow students to train their programming skills. However, their pedagogical functionalities in the learning of programming have not been clearly defined. EduJudge is a project which aims to integrate the “UVA On-line Judge”, an existing on-line programming trainer with an important number of problems and users, into an effective educational environment consisting of the e-learning platform Moodle and the competitive learning tool QUESTOURnament. The result is the EduJudge system which allows teachers to apply different pedagogical approaches using a proven e-learning platform, makes problems easy to search through an effective search engine, and provides an automated evaluation of the solutions submitted to these problems. The final objective is to provide new learning strategies to motivate students and present programming as an easy and attractive challenge. EduJudge has been tried and tested in three algorithms and programming courses in three different Engineering degrees. The students’ motivation and satisfaction levels were analysed alongside the effects of the EduJudge system on students’ academic outcomes. Results indicate that both students and teachers found that among other multiple benefits the EduJudge system facilitates the learning process. Furthermore, the experi- ment also showed an improvement in students’ academic outcomes. It must be noted that the students’ level of satisfaction did not depend on their computer skills or their gender.

Stability of fractional order systems

The theory and applications of fractional calculus (FC) had a considerable progress during the last years. Dynamical systems and control are one of the most active areas, and several authors focused on the stability of fractional order systems. Nevertheless, due to the multitude of efforts in a short period of time, contributions are scattered along the literature, and it becomes difficult for researchers to have a complete and systematic picture of the present day knowledge. This paper is an attempt to overcome this situation by reviewing the state of the art and putting this topic in a systematic form. While the problem is formulated with rigour, from the mathematical point of view, the exposition intends to be easy to read by the applied researchers. Different types of systems are considered, namely, linear/nonlinear, positive, with delay, distributed, and continuous/discrete. Several possible routes of future progress that emerge are also tackled.

Distributed active traction control system applied to the RoboCup middle size league

This work addresses the problem of traction control in mobile wheeled robots in the particular case of the RoboCup Middle Size League (MSL). The slip control problem is formulated using simple friction models for ISePorto Team robots with a differential wheel configuration. Traction was also characterized experimentally in the MSL scenario for relevant game events. This work proposes a hierarchical traction control architecture which relies in local slip detection and control at each wheel, with relevant information being relayed to a higher level responsible for global robot motion control. A dedicated one axis control embedded hardware subsystem allowing complex local control, high frequency current sensing and odometric information procession was developed. This local axis control board is integrated in a distributed system using CAN bus communications. The slipping observer was implemented in the axis control hardware nodes integrated in the ISePorto robots and was used to control and detect loss of for traction. %and to detect the ball in the kicking device. An external vision system was used to perform a qualitative analysis of the slip detection and observer performance results are presented.

Ethernet-based systems: contributions to the holistic analysis

A number of characteristics are boosting the eagerness of extending Ethernet to also cover factory-floor distributed real-time applications. Full-duplex links, non-blocking and priority-based switching, bandwidth availability, just to mention a few, are characteristics upon which that eagerness is building up. But, will Ethernet technologies really manage to replace traditional Fieldbus networks? To this question, Fieldbus fundamentalists often argue that the two technologies are not comparable. In fact, Ethernet technology, by itself, does not include features above the lower layers of the OSI communication model. Where are the higher layers that permit building real industrial applications? And, taking for free that they are available, what is the impact of those protocols, mechanisms and application models on the overall performance of Ethernetbased distributed factory-floor applications? In this paper we provide some contributions that may pave the way towards providing some reasonable answers to these issues.

Workload balancing in distributed virtual reality environments

Virtual Reality (VR) has grown to become state-of-theart technology in many business- and consumer oriented E-Commerce applications. One of the major design challenges of VR environments is the placement of the rendering process. The rendering process converts the abstract description of a scene as contained in an object database to an image. This process is usually done at the client side like in VRML [1] a technology that requires the client’s computational power for smooth rendering. The vision of VR is also strongly connected to the issue of Quality of Service (QoS) as the perceived realism is subject to an interactive frame rate ranging from 10 to 30 frames-per-second (fps), real-time feedback mechanisms and realistic image quality. These requirements overwhelm traditional home computers or even high sophisticated graphical workstations over their limits. Our work therefore introduces an approach for a distributed rendering architecture that gracefully balances the workload between the client and a clusterbased server. We believe that a distributed rendering approach as described in this paper has three major benefits: It reduces the clients workload, it decreases the network traffic and it allows to re-use already rendered scenes.

A framework for realistic real-time walkthroughs in a VR distributed environment

Virtual and augmented reality (VR/AR) are increasingly being used in various business scenarios and are important driving forces in technology development. However the usage of these technologies in the home environment is restricted due to several factors including lack of low-cost (from the client point of view) highperformance solutions. In this paper we present a general client/server rendering architecture based on Real-Time concepts, including support for a wide range of client platforms and applications. The idea of focusing on the real-time behaviour of all components involved in distributed IP-based VR scenarios is new and has not been addressed before, except for simple sub-solutions. This is considered as “the most significant problem with the IP environment” [1]. Thus, the most important contribution of this research will be the holistic approach, in which networking, end-systems and rendering aspects are integrated into a cost-effective infrastructure for building distributed real-time VR applications on IP-based networks.

CIDER - envisaging a COTS communication infrastructure for evolutionary dependable real-time systems

It is foreseen that future dependable real-time systems will also have to meet flexibility, adaptability and reconfigurability requirements. Considering the distributed nature of these computing systems, a communication infrastructure that permits to fulfil all those requirements is thus of major importance. Although Ethernet has been used primarily as an information network, there is a strong belief that some very recent technological advances will enable its use in dependable applications with real-time requirements. Indeed, several recently standardised mechanisms associated with Switched-Ethernet seem to be promising to enable communication infrastructures to support hard real-time, reliability and flexible distributed applications. This paper describes the motivation and the work being developed within the CIDER (Communication Infrastructure for Dependable Evolvable Real-Time Systems) project, which envisages the use of COTS Ethernet as an enabling technology for future dependable real-time systems. It is foreseen that the CIDER approach will constitute a relevant stream of research since it will bring together cutting edge research in the field of real-time and dependable distributed systems and the industrial eagerness to expand Ethernet responsabilities to support dependable real-time applications.

Designing real-time systems based on mono-master Profibus-DP networks

Profibus networks are widely used as the communication infrastructure for supporting distributed computer-controlled applications. Most of the times, these applications impose strict real-time requirements. Profibus-DP has gradually become the preferred Profibus application profile. It is usually implemented as a mono-master Profibus network, and is optimised for speed and efficiency. The aim of this paper is to analyse the real-time behaviour of this class of Profibus networks. Importantly, we develop a new methodology for evaluating the worst-case message response time in systems where high-priority and cyclic low-priority Profibus traffic coexist. The proposed analysis constitutes a powerful tool to guarantee prior to runtime the real-time behaviour of a distributed computer-controlled system based on a Profibus network, where the realtime traffic is supported either by high-priority or by cyclic poll Profibus messages.

Setting target rotation time in PROFIBUS based real-time distributed applications

In this paper, we analyse the ability of Profibus fieldbus to cope with the real-time requirements of a Distributed Computer Control System (DCCS), where messages associated to discrete events must be made available within a maximum bound time. Our methodology is based on the knowledge of real-time traffic characteristics, setting the network parameters in order to cope with timing requirements. Since non-real-time traffic characteristics are usually unknown at the design stage, we consider an operational profile where, constraining non-real-time traffic at the application level, we assure that realtime requirements are met.

Replication management in reliable real-time systems

Building reliable real-time applications on top of commercial off-the-shelf (COTS) components is not a straightforward task. Thus, it is essential to provide a simple and transparent programming model, in order to abstract programmers from the low-level implementation details of distribution and replication. However, the recent trend for incorporating pre-emptive multitasking applications in reliable real-time systems inherently increases its complexity. It is therefore important to provide a transparent programming model, enabling pre-emptive multitasking applications to be implemented without resorting to simultaneously dealing with both system requirements and distribution and replication issues. The distributed embedded architecture using COTS components (DEAR-COTS) architecture has been previously proposed as an architecture to support real-time and reliable distributed computer-controlled systems (DCCS) using COTS components. Within the DEAR-COTS architecture, the hard real-time subsystem provides a framework for the development of reliable real-time applications, which are the core of DCCS applications. This paper presents the proposed framework, and demonstrates how it can be used to support the transparent replication of software components.