A Study on Microstructure Characteristics of TEPs-modified Adhesives

Thermally expandable particles (TEPs) were developed by Dow Chemical Co in the early 1970´s [1] and were further developed by others [2, 3]. They are particles made up of a thermoplastic shell filled with liquid hydrocarbon. On heating them, two transformations will occur. One is the softening of shell material and the other is the gasification of the hydrocarbon liquid inside it. As a consequence, the shell will expand as the gas inside it will push the softened shell from inside out causing it to grow in size [4]. When fully expanded, the growth in volume of the particle can be from 50 to 100 times [3]. Owing to this unique behaviour, TEPs are used by the industry in a wide variety of applications mainly for weight reduction and appearance improvement for thermoplastics, inks, and coatings. In adhesive bonding, TEPs have been used for recycling purposes. Moreover, TEPs might be used to modify structural adhesives for other new purposes, such as: to increase the joint strength by creating an adhesive functionally modified along the overlap of the joint by gradual heating and/or to heal the adhesive in case of damage.

Mechanical properties of chemically modified portuguese pinewood

To turn wood into a construction material with enhanced properties, many methods of chemical modification have been developed in the last few decades. In this work, mechanical properties of pine wood were chemically modified, compared and evaluated. Maritime pine wood (Pinus pinaster) was modified with four chemical processes: 1,3-dimethylol-4,5- dihydroxyethyleneurea, N-methylol melamine formaldehyde, tetra-alkoxysilane and wax. The following mechanical properties were assessed experimentally: Modulus of elasticity measured statically, stiffness stabilization efficiency in different climates (30 and 87% of relative humidity), modulus of rupture, work maximum load, impact bending strength, compression, tensile and shear strength at indoor conditions (65% of relative humidity). In both types of active principle of modification, cell wall or lumen fill, no significant changes on the bending stiffness (modulus of elasticity) were found. In the remaining properties analysed significant changes in the modified wood-material took place compared to unmodified wood control: - Cell wall modification was the most effective method to achieve high stiffness stabilization efficiency (up to 60%) and also increased compression strength (up to 230%). However, modulus of rupture, tensile, shear and the impact bending strength were reduced by both resins, but in a varying extent, where the N-methylol melamine formaldehyde endured less reduction than 1,3-dimethylol-4,5-dihydroxyethyleneurea resin. In the latter, reduction up to 60% can take place. - In the lumen fill modification: tetra-alkoxysilane has no effect in the mechanical properties. Although, a slight increase in shear strength parallel to the grain was found. Wax specimens have shown a slight increase in bending strength, compression, tensile and shear strength as well as in the absorption energy capacity.

Proposta de modelo para obtenção do Work Index das rochas

Este trabalho pretende estabelecer uma relação entre o Work Index e algumas propriedades das rochas. Através da pesquisa bibliográfica foram identificadas varias propriedades com possível influência no valor do Work Index, das quais foram seleccionadas a massa volúmica aparente, a resistência à carga pontual, a composição química, a composição mineralógica e a abrasividade. Adicionalmente a porosidade aberta e resistência à compressão também foram analisadas. Assim foram analisadas 10 amostras de rocha, quatro de granitos, uma de quartzodiorito, uma de ardósia, uma de serpentinito, uma de calcário, uma de mármore e uma de sienito nefelínico, sobre as quais já eram conhecidos os valores de cinco das propriedades referidas previamente, tendo sido determinados os valores das ainda desconhecidas, resistência à carga pontual e a abrasividade que está representada através do resultado do ensaio capon. Devido à dificuldade de execução do ensaio de determinação do Work Index de Bond foram recolhidos dados bibliográficos de valores do Work Index para as amostras de rocha seleccionadas e adoptado o valor médio para cada uma. Os dados obtidos foram tratados estatisticamente através do método de análise de componentes principais assim como através de regressões lineares simples e múltiplas. A análise de componentes principais permitiu identificar várias propriedades da rocha com possível influência sobre o Work Index de entre as analisadas. Foi possível estabelecer uma relação entre o Work Index e quatro das propriedades seleccionadas, designadamente a porosidade aberta, a resistência à compressão, a resistência à carga pontual e a abrasividade.