Predictivity Strength of the Spatial Variability of Phenanthrene Sorption Across Two Sandy Loam Fields

Sorption is commonly agreed to be the major process underlying the transport and fate of polycyclic aromatic hydrocarbons (PAHs) in soils. However, there is still a scarcity of studies focusing on spatial variability at the field scale in particular. In order to investigate the variation in the field of phenanthrene sorption, bulk topsoil samples were taken in a 15 × 15-m grid from the plough layer in two sandy loam fields with different texture and organic carbon (OC) contents (140 samples in total). Batch experiments were performed using the adsorption method. Values for the partition coefficient K d (L kg−1) and the organic carbon partition coefficient K OC (L kg−1) agreed with the most frequently used models for PAH partitioning, as OC revealed a higher affinity for sorption. More complex models using different OC compartments, such as non-complexed organic carbon (NCOC) and complexed organic carbon (COC) separately, performed better than single K OC models, particularly for a subset including samples with Dexter n < 10 and OC <0.04 kg kg−1. The selected threshold revealed that K OC-based models proved to be applicable for more organic fields, while two-component models proved to be more accurate for the prediction of K d and retardation factor (R) for less organic soils. Moreover, OC did not fully reflect the changes in phenanthrene retardation in the field with lower OC content (Faardrup). Bulk density and available water content influenced the phenanthrene transport mechanism phenomenon.

Countries three Wise Men: Sustainability, Innovation, and Competitiveness

Purpose: The studies on links between sustainability, innovation, and competitiveness have been mainly focused at organizational and business level. The purpose of this research is to investigate if there is a correlation between these three variables at country level. Using international well recognized rankings of countries sustainability, innovation, and competitiveness, correlation analysis was performed allowing for the conclusion that there are indeed high correlations (and possible relationships) between the three variables at country level. Design/methodology/approach: Sustainability, innovation, and competitiveness literature were reviewed identifying a lack of studies examining these three variables at country level. Three major well recognized indexes were used to support the quantitative research: The World Economic Forum (2013) Sustainability-adjusted global competitiveness index, the Global Innovation Index (2014) issued by Cornell University, INSEAD, and WIPO and the IMD World Competitiveness Yearbook (2014). After confirming the distributions normality, Pearson correlation analysis was made with results showing high linear correlations between the three indexes. Findings: The results of the correlation analysis using Pearson correlation coefficient (all correlation coefficients are greater than 0.73) give a strong support to the conclusion that there is indeed a high correlation (and a possible relationship) between social sustainability, innovation and competitiveness at country level. Research limitations/implications: Further research is advisable to better understand the factors that contribute to the presented results and to establish a global paradigm linking these three main constructs (social sustainability, innovation, and competitiveness). Some authors consider that these measurements are not fully supported (e.g. due to different countries standards), however, it is assumed these differing underlying methodological approaches, by being used in conjunction, can be considered as a set of reliable and useful performance indicators. Practical implications: The results highlight the simultaneous relationship between social sustainability, innovation and competitiveness superior performance and the need to take that these considerations into business and operating models. Social implications: This research suggests that sustainability and innovation policies, strategies and practices are relevant for countries competitiveness and should be promoted particularly in countries ranked low on sustainability and innovation global scoring indexes. Originality/value: This is one of the few studies addressing the relationships between sustainability, innovation and competitiveness at country level.

Reliability of Two Methods for Identifying the Postural Phase of Gait Initiation in Healthy and Post-stroke Subjects

This study aims to compare two methods of assessing the postural phase of gait initiation as to intrasession reliability, in healthy and post-stroke subjects. As a secondary aim, this study aims to analyse anticipatory postural adjustments during gait initiation based on the centre of pressure (CoP) displacements in post-stroke participants. The CoP signal was acquired during gait initiation in fifteen post-stroke subjects and twenty-three healthy controls. Postural phase was identified through a baseline-based method and a maximal displacement based method. In both healthy and post-stroke participants higher intra-class correlation coefficient and lower coefficient of variation values were obtained with the baseline-based method when compared to the maximal displacement based method. Post-stroke participants presented decreased CoP displacement backward and toward the first swing limb compared to controls when the baseline-based method was used. With the maximal displacement based method, there were differences between groups only regarding backward CoP displacement. Postural phase duration in medial-lateral direction was also increased in post-stroke participants when using the maximal displacement based method. The findings obtained indicate that the baseline-based method is more reliable detecting the onset of gait initiation in both groups, while the maximal displacement based method presents greater sensitivity for post-stroke participants.

Diffusion characteristics of ethylene glycol in skeletal muscle

Part of the optical clearing study in biological tissues concerns the determination of the diffusion characteristics of water and optical clearing agents in the subject tissue. Such information is sufficient to characterize the time dependence of the optical clearing mechanisms—tissue dehydration and refractive index (RI) matching. We have used a simple method based on collimated optical transmittance measurements made from muscle samples under treatment with aqueous solutions containing different concentrations of ethylene glycol (EG), to determine the diffusion time values of water and EG in skeletal muscle. By representing the estimated mean diffusion time values from each treatment as a function of agent concentration in solution, we could identify the real diffusion times for water and agent. These values allowed for the calculation of the correspondent diffusion coefficients for those fluids. With these results, we have demonstrated that the dehydration mechanism is the one that dominates optical clearing in the first minute of treatment, while the RI matching takes over the optical clearing operations after that and remains for a longer time of treatment up to about 10 min, as we could see for EG and thin tissue samples of 0.5 mm.

The characteristic time of glucose diffusion measured for muscle tissue at optical clearing

The study of agent diffusion in biological tissues is very important to understand and characterize the optical clearing effects and mechanisms involved: tissue dehydration and refractive index matching. From measurements made to study the optical clearing, it is obvious that light scattering is reduced and that the optical properties of the tissue are controlled in the process. On the other hand, optical measurements do not allow direct determination of the diffusion properties of the agent in the tissue and some calculations are necessary to estimate those properties. This fact is imposed by the occurrence of two fluxes at optical clearing: water typically directed out of and agent directed into the tissue. When the water content in the immersion solution is approximately the same as the free water content of the tissue, a balance is established for water and the agent flux dominates. To prove this concept experimentally, we have measured the collimated transmittance of skeletal muscle samples under treatment with aqueous solutions containing different concentrations of glucose. After estimating the mean diffusion time values for each of the treatments we have represented those values as a function of glucose concentration in solution. Such a representation presents a maximum diffusion time for a water content in solution equal to the tissue free water content. Such a maximum represents the real diffusion time of glucose in the muscle and with this value we could calculate the corresponding diffusion coefficient.

Dynamic stability metrics for the container loading problem

The Container Loading Problem (CLP) literature has traditionally evaluated the dynamic stability of cargo by applying two metrics to box arrangements: the mean number of boxes supporting the items excluding those placed directly on the floor (M1) and the percentage of boxes with insufficient lateral support (M2). However, these metrics, that aim to be proxies for cargo stability during transportation, fail to translate real-world cargo conditions of dynamic stability. In this paper two new performance indicators are proposed to evaluate the dynamic stability of cargo arrangements: the number of fallen boxes (NFB) and the number of boxes within the Damage Boundary Curve fragility test (NB_DBC). Using 1500 solutions for well-known problem instances found in the literature, these new performance indicators are evaluated using a physics simulation tool (StableCargo), replacing the real-world transportation by a truck with a simulation of the dynamic behaviour of container loading arrangements. Two new dynamic stability metrics that can be integrated within any container loading algorithm are also proposed. The metrics are analytical models of the proposed stability performance indicators, computed by multiple linear regression. Pearson’s r correlation coefficient was used as an evaluation parameter for the performance of the models. The extensive computational results show that the proposed metrics are better proxies for dynamic stability in the CLP than the previous widely used metrics.

Significance of Biogenic Amines in Cold-Smoked Fish and Their Relation to Microbiological Characteristics of Products Available in Portuguese Retail Markets

Studies on microbial characterization of cold-smoked salmon and salmon trout during cold storage were performed on samples available in the Portuguese market. Samples were also classified microbiologically according to guidelines for ready-to-eat (RTE) products. Further investigations on sample variability and microbial abilities to produce tyramine and histamine were also performed. The coefficient of variation for viable counts of different groups of microorganisms of samples collected at retail market point was high in the first 2 wk of storage, mainly in the Enterobacteriaceae group and aerobic plate count (APC), suggesting that microbiological characteristics of samples were different in numbers, even within the same batch from the same producer. This variation seemed to be decreased when storage and temperature were controlled under lab conditions. The numbers of Enterobacteriaceae were influenced by storage temperature, as indicated by low microbial numbers in samples from controlled refrigeration. Lactic acid bacteria (LAB) and Enterobacteriaceae were predominant in commercial products, a significant percentage of which were tyramine and less histamine producers. These results might be influenced by (1) the technological processes in the early stages of production, (2) contamination during the smoking process, and (3) conditions and temperature fluctuations during cold storage at retail market point of sale.

O capital intelectual e a performance das empresas do PSI 20

Num contexto de crescente complexidade e disponibilidade de informação, a gestão do capital intelectual assume cada vez mais preponderância como vantagem competitiva para as empresas que procuram maximizar o valor gerado. Esta investigação usa como metodologia príncipal o VAIC (coeficiente intelectual do valor adicionado), para assim estudar a existência de relação entre capital intelectual e a performance bolsista e financeira das empresas do PSI20. O VAIC é decomposto nos seus três indicadores de eficiência, tais como: capital humano, capital estrutural e capital físico. Os dados contemplam quinze empresas e nove anos de análise (2003 - 2011). Elaborou-se uma abordagem que recorre à utilização de técnicas econométricas para reduzir potênciais falhas no tratamento de dados em painel. Os resultados da análise demonstram uma relação positiva entre a aposta em capital intelectual a performance bolsista e financeira, ou seja, a utilização e gestão eficientes do capital intelectual contribuem de forma significativa na avaliação bolsista e financeira das empresas do PSI20.

Elaboração e estruturação de um modelo de rating interno

Temos vindo a assistir nos últimos anos a uma evolução no que respeita à avaliação do risco de crédito. As constantes alterações de regulamentação bancária, que resultam dos Acordos de Basileia, têm vindo a impor novas normas que condicionam a quantidade e a qualidade do risco de crédito que as Instituições de Crédito podem assumir nos seus balanços. É de grande importância as Instituições de Crédito avaliarem o risco de crédito, as garantias e o custo de capital, pois têm um impacto direto na sua gestão nomeadamente quanto à afetação de recursos e proteção contra perdas. Desta forma, pretende-se com o presente trabalho elaborar e estruturar um modelo de rating interno através de técnicas estatísticas, assim como identificar as variáveis estatisticamente relevantes no modelo considerado. Foi delineada uma metodologia de investigação mista, considerando na primeira parte do trabalho uma pesquisa qualitativa e na segunda parte uma abordagem quantitativa. Através da análise documental, fez-se uma abordagem dos conceitos teóricos e da regulamentação que serve de base ao presente trabalho. No estudo de caso, o modelo de rating interno foi desenvolvido utilizando a técnica estatística designada de regressão linear múltipla. A amostra considerada foi obtida através da base de dados SABI e é constituída por cem empresas solventes, situadas na zona de Paredes, num horizonte temporal de 2011-2013. A nossa análise baseou-se em três cenários, correspondendo cada cenário aos dados de cada ano (2011, 2012 e 2013). Para validar os pressupostos do modelo foram efetuados testes estatísticos de Durbin Watson e o teste de significância - F (ANOVA). Por fim, para obtermos a classificação de rating de cada variável foi aplicada a técnica dos percentis. Pela análise dos três cenários considerados, verificou-se que o cenário dois foi o que obteve maior coeficiente de determinação. Verificou-se ainda que as variáveis independentes, rácio de liquidez geral, grau de cobertura do ativo total pelo fundo de maneio e rácio de endividamento global são estatisticamente relevantes.