Economic, environmental and mixed objective functions in non-linear process optimization using simulated annealing and tabu search

Screening of topologies developed by hierarchical heuristic procedures can be carried out by comparing their optimal performance. In this work we will be exploiting mono-objective process optimization using two algorithms, simulated annealing and tabu search, and four different objective functions: two of the net present value type, one of them including environmental costs and two of the global potential impact type. The hydrodealkylation of toluene to produce benzene was used as case study, considering five topologies with different complexities mainly obtained by including or not liquid recycling and heat integration. The performance of the algorithms together with the objective functions was observed, analyzed and discussed from various perspectives: average deviation of results for each algorithm, capacity for producing high purity product, screening of topologies, objective functions robustness in screening of topologies, trade-offs between economic and environmental type objective functions and variability of optimum solutions.

Simulation and life cycle assessment of process design alternatives for biodiesel production from waste vegetable oils

This study uses the process simulator ASPEN Plus and Life Cycle Assessment (LCA) to compare three process design alternatives for biodiesel production from waste vegetable oils that are: the conventional alkali-catalyzed process including a free fatty acids (FFAs) pre-treatment, the acid-catalyzed process, and the supercritical methanol process using propane as co-solvent. Results show that the supercritical methanol process using propane as co-solvent is the most environmentally favorable alternative. Its smaller steam consumption in comparison with the other process design alternatives leads to a lower contribution to the potential environmental impacts (PEI’s). The acid-catalyzed process generally shows the highest PEI’s, in particular due to the high energy requirements associated with methanol recovery operations.

Implementação de cursos em regime de e-learning em ambiente hospitalar. A MEDUCA como suporte

A sociedade moderna encontra-se numa evolução progressiva e constante no que respeita às novas tecnologias. Independentemente da área de conhecimento, é de senso comum, que cada vez mais é necessária formação sólida, sendo fundamental a preparação e a consolidação das futuras gerações na utilização das novas tecnologias. As plataformas de e-learning são hoje em dia uma realidade mais que afirmada, e com aplicação em todos os sectores de actividade. A área da saúde não foge à regra, verificando-se que os seus profissionais evidenciam falta de disponibilidade para participação nas formações presenciais, fundamentais para o seu processo de formação contínua (LLL – Long Liffe Learning). Estes profissionais necessitam de estar continuamente actualizados, de forma a melhor poderem contribuir para o desempenho das suas funções, como o aconselhamento dos utentes, acompanhamento de doentes crónicos, uso correcto dos medicamentos, entre outros. O presente trabalho pretende implementar em ambiente hospitalar o modelo de formação à distância em regime de e-learning ou b-learning, identificando potenciais vantagens e constrangimentos inerentes ao processo. Para o efeito, será utilizada a plataforma MEDUCA criada pelo GILT-ISEP e baseada em Moodle, como uma plataforma destinada á formação para profissionais da área da Saúde. Esta dissertação apresenta uma investigação sobre a implementação da dita plataforma em ambiente hospitalar. Esta dissertação apresenta todo o estudo/trabalho desenvolvido para a implementação da plataforma MEDUCA nalgumas entidades contactadas da área da saúde. Espera-se que esta ferramenta ofereça uma alternativa interactiva de educação e aprendizagem, visando melhorar constantemente o nível formativo de cada profissional de saúde.

On local fractional continuous wavelet transform

We introduce a new wavelet transform within the framework of the local fractional calculus. An illustrative example of local fractional wavelet transform is also presented.

Modelo de competências dos enfermeiros com funções de gestão em Portugal: estudo exploratório

Nas últimas décadas assistimos a transformações económicas, tecnológicas, políticas e sociais, que influenciaram diretamente o modo de pensar e agir nas organizações. O conceito de competências, com uma valorização crescente, surge como uma alternativa à abordagem da gestão de recursos humanos por funções, respondendo aos desafios atuais do mercado: necessidade de flexibilidade, de adaptação a mudanças contínuas, exigências crescentes do mercado e competitividade das organizações nesse mercado. A área da saúde, e concretamente a profissão de Enfermagem também tem evoluído, surgindo em 2009, uma nova forma de operacionalizar a carreira destes profissionais. No que diz respeito aos enfermeiros com funções de gestão, o conteúdo funcional está descrito, contudo, não existe uma definição clara das competências requeridas para estes profissionais. Este trabalho de investigação, de cariz exploratório, utilizando uma metodologia qualitativa, pretendeu propor uma estratégia de definição de um modelo de competências para os enfermeiros com funções de gestão em Portugal. Para isso, definimos categorias de competências, através da análise da literatura e da legislação. Seguiu-se a realização de entrevistas a um painel de doze peritos, e uma análise de conteúdo dos dados (categorização do tipo misto). Procedemos a uma comparação da recolha empírica de competências com as da recolha teórica, e definimos uma lista de 10 competências para as funções de gestão dos enfermeiros: Competências Técnicas de Gestão; Competências Interpessoais; Comunicação; Gestão de Recursos Humanos; Pensamento Crítico; Conhecimento de Políticas de Saúde; Competências Técnicas de Enfermagem; Organização e Planeamento; Trabalho de Equipa; Preocupação pela Qualidade. De forma a complementar o estudo, pretendemos identificar a perceção das lacunas de competências nos enfermeiros com funções de gestão, e identificar os processos de desenvolvimento de competências considerados mais relevantes para estes profissionais. As lacunas identificadas nas competências dos atuais enfermeiros com funções de gestão, face às mais valorizadas, são reduzidas e dispersas, pelo que consideramos pouco significativas. A forma de desenvolvimento de competências mais valorizado pelo painel de peritos foi a formação (académica e em contexto profissional). Foi também realçada a importância do empenho individual neste processo, assim como a avaliação de competências antes dos enfermeiros assumirem funções de gestão.Consideramos que esta investigação traz contributos quer para a literatura da Gestão por Competências, quer para a literatura da definição de competências das funções dos enfermeiros com funções de gestão, quer para a profissão de enfermagem, (nomeadamente, para as funções de gestão dos enfermeiros), quer para o próprio SNS, já que faz algumas propostas e sugestões para a evolução das práticas de gestão de pessoas.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

Legal and political regulation of higher education in Portugal: an evolutionary perspective on the current policy issues and the problem of order

The higher education system in Europe is currently under stress and the debates over its reform and future are gaining momentum. Now that, for most countries, we are in a time for change, in the overall society and the whole education system, the legal and political dimensions have gained prominence, which has not been followed by a more integrative approach of the problem of order, its reform and the issue of regulation, beyond the typical static and classical cost-benefit analyses. The two classical approaches for studying (and for designing the policy measures of) the problem of the reform of the higher education system - the cost-benefit analysis and the legal scholarship description - have to be integrated. This is the argument of our paper that the very integration of economic and legal approaches, what Warren Samuels called the legal-economic nexus, is meaningful and necessary, especially if we want to address the problem of order (as formulated by Joseph Spengler) and the overall regulation of the system. On the one hand, and without neglecting the interest and insights gained from the cost-benefit analysis, or other approaches of value for money assessment, we will focus our study on the legal, social and political aspects of the regulation of the higher education system and its reform in Portugal. On the other hand, the economic and financial problems have to be taken into account, but in a more inclusive way with regard to the indirect and other socio-economic costs not contemplated in traditional or standard assessments of policies for the tertiary education sector. In the first section of the paper, we will discuss the theoretical and conceptual underpinning of our analysis, focusing on the evolutionary approach, the role of critical institutions, the legal-economic nexus and the problem of order. All these elements are related to the institutional tradition, from Veblen and Commons to Spengler and Samuels. The second section states the problem of regulation in the higher education system and the issue of policy formulation for tackling the problem. The current situation is clearly one of crisis with the expansion of the cohorts of young students coming to an end and the recurrent scandals in private institutions. In the last decade, after a protracted period of extension or expansion of the system, i. e., the continuous growth of students, universities and other institutions are competing harder to gain students and have seen their financial situation at risk. It seems that we are entering a period of radical uncertainty, higher competition and a new configuration that is slowly building up is the growth in intensity, which means upgrading the quality of the higher learning and getting more involvement in vocational training and life-long learning. With this change, and along with other deep ones in the Portuguese society and economy, the current regulation has shown signs of maladjustment. The third section consists of our conclusions on the current issue of regulation and policy challenge. First, we underline the importance of an evolutionary approach to a process of change that is essentially dynamic. A special attention will be given to the issues related to an evolutionary construe of policy analysis and formulation. Second, the integration of law and economics, through the notion of legal economic nexus, allows us to better define the issues of regulation and the concrete problems that the universities are facing. One aspect is the instability of the political measures regarding the public administration and on which the higher education system depends financially, legally and institutionally, to say the least. A corollary is the lack of clear strategy in the policy reforms. Third, our research criticizes several studies, such as the one made by the OECD in late 2006 for the Ministry of Science, Technology and Higher Education, for being too static and neglecting fundamental aspects of regulation such as the logic of actors, groups and organizations who are major players in the system. Finally, simply changing the legal rules will not necessary per se change the behaviors that the authorities want to change. By this, we mean that it is not only remiss of the policy maker to ignore some of the critical issues of regulation, namely the continuous non-respect by academic management and administrative bodies of universities of the legal rules that were once promulgated. Changing the rules does not change the problem, especially without the necessary debates form the different relevant quarters that make up the higher education system. The issues of social interaction remain as intact. Our treatment of the matter will be organized in the following way. In the first section, the theoretical principles are developed in order to be able to study more adequately the higher education transformation with a modest evolutionary theory and a legal and economic nexus of the interactions of the system and the policy challenges. After describing, in the second section, the recent evolution and current working of the higher education in Portugal, we will analyze the legal framework and the current regulatory practices and problems in light of the theoretical framework adopted. We will end with some conclusions on the current problems of regulation and the policy measures that are discusses in recent years.

Evaluating P-NET message's response time with fixed priority queuing at application process level

P-NET is a multi-master fieldbus standard based on a virtual token passing scheme. In P-NET each master is allowed to transmit only one message per token visit. In the worst-case, the communication response time can be derived considering that, in each token cycle, all stations use the token to transmit a message. In this paper, we define a more sophisticated P-NET model, which considers the actual token utilisation. We then analyse the possibility of implementing a local priority-based scheduling policy to improve the real-time behaviour of P-NET.

Application of continuous wavelet transform to the analysis of the modulus of the fractional Fourier transform bands for resolving two component mixture

In this paper, the fractional Fourier transform (FrFT) is applied to the spectral bands of two component mixture containing oxfendazole and oxyclozanide to provide the multicomponent quantitative prediction of the related substances. With this aim in mind, the modulus of FrFT spectral bands are processed by the continuous Mexican Hat family of wavelets, being denoted by MEXH-CWT-MOFrFT. Four modulus sets are obtained for the parameter a of the FrFT going from 0.6 up to 0.9 in order to compare their effects upon the spectral and quantitative resolutions. Four linear regression plots for each substance were obtained by measuring the MEXH-CWT-MOFrFT amplitudes in the application of the MEXH family to the modulus of the FrFT. This new combined powerful tool is validated by analyzing the artificial samples of the related drugs, and it is applied to the quality control of the commercial veterinary samples.

A complex protocol layer as a linux user-space process

With the current complexity of communication protocols, implementing its layers totally in the kernel of the operating system is too cumbersome, and it does not allow use of the capabilities only available in user space processes. However, building protocols as user space processes must not impair the responsiveness of the communication. Therefore, in this paper we present a layer of a communication protocol, which, due to its complexity, was implemented in a user space process. Lower layers of the protocol are, for responsiveness issues, implemented in the kernel. This protocol was developed to support large-scale power-line communication (PLC) with timing requirements.

Comparative study about heating systems for pultrusion process

Different heating systems have been used in pultrusion, where the most widely used heaters are planar resistances. The primary objective of this study was to develop an improved heating system and compare its performance with that of a system with planar resistances. In this study, thermography was used to better understand the temperature profile along the die. Finite element analysis was performed to determine the amount of energy consumed by the heating systems. Improvements were made to the die to test the new heating system, and it was found that the new system reduced the setup time and energy consumption by approximately 57%.

Processing of continuous fibre reinforced thermoplastics

Towpregs based on different fibres and thermoplastic matrices were processed for highly demanding and more commercial applications by different composite processing technologies. In the technologies used, compression moulding and pultrusion, the final composite pr ocessing parameters were studied in order to obtain composites with adequate properties at industrial compatible production rates. The produced towpregs were tested to verify its polymer content and degree of impregnation. The obtained results have shown t hat the coating line enabled to produce, with efficiency and industrial scale speed rates, thermoplastic matrix towpregs that may be used to manufacture composites for advanced and larger volume commercial markets.