Implementação e integração do modelo de acreditação da Joint Commission International na unidade de imagiologia do Hospital Privado da Boavista

Este trabalho descreve a abordagem abrangente sobre a melhoria do sistema de gestão da qualidade na Unidade de Imagiologia do Hospital da Boavista através da implementação das normas de acreditação da Joint Commission International (JCI). Fundamental para a melhoria geral da qualidade é a redução contínua de riscos para os doentes e para os profissionais da Unidade. Tais riscos podem existir ao nível do ambiente físico assim como no circuito dos exames e dos doentes. A acreditação em Saúde é uma das prioridades estratégicas do Ministério da Saúde e tem como objetivo fortalecer a confiança dos cidadãos nos profissionais de saúde bem como nas instituições de saúde. É importante que Portugal cultive a melhoria da qualidade e segurança nas instituições de saúde mantendo uma relação adequada custo/benefício. A União Europeia tem feito um esforço para que a acreditação seja harmoniosa nos seus princípios, no entanto é respeitada sempre a prevalência da legislação de cada país, bem como as suas especificações culturais e religiosas (Shaw, 2006), responsabilizando-o pelo seu sistema de saúde O trabalho aqui apresentado tem como objetivo principal fundamentar a escolha do modelo de acreditação da JCI para o Hospital da Boavista, nomeadamente para a Unidade de Imagiologia, ver se os padrões estão de acordo com os procedimentos da Unidade, identificar falhas e apontar possiveis melhorias. Pretende-se ainda mostrar a importância da implementação dos sistemas de certificação e acreditação da gestão da qualidade, documentada pela experiência profissional, bem como o know-how do Hospital da Boavista, assim como a complementaridade dos programas da gestão da qualidade, certificação e acreditação. A escolha do modelo de acreditação da JCI, foi uma opção do Hospital da Boavista baseada na credibilidade e no grau de exigência que a entidade impõe. Foi imperativo que a Unidade de Imagiologia realizasse as suas funções de forma válida e fiável e que disponibilizasse produtos / serviços de qualidade. A monitorização e consequente controlo de qualidade do serviço prestado pela Unidade de Imagiologia, foi difícil mas simplificado, em parte, devido ao sistema de gestão da qualidade ISO 9001:2008 já implementado, tendo este sido consolidado com a implementação da acreditação da JCI, com padrões específicos bem definidos na gestão do controlo de qualidade na Unidade de Imagiologia do Hospital da Boavista.

Motivations to participate in international trade fairs: the Portuguese experience

Motivations/barriers to participate in ITF

Participate (or not) in international trade fairs? Decision factors of Portuguese managers

Portugal is a small economy, with an open domestic market that needs competitive exporters to prosper. Trade fairs are an international promotion tool that can be used by firms when considering export development and expansion. This study identifies and evaluates the critical factors that influenced the decision making process of Portuguese SME’s (Small and Medium-Sized Enterprises) managers to participate (or not) in international trade fairs. The results indicate that the firm’s critical decisions factors to select an international trade fair were value for money and the stand (location, typology and size)

New end-use application for GFRP recyclates as reinforcement for concrete-polymer materials’

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one-factor-at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and filler replacements for polymer mortar, with significant gain of mechanical properties with regard to non-modified polymer mortars.

Auditoria às demonstrações financeiras num contexto de crise estudo de caso: inquérito às sociedades de Revisores Oficiais de Contas das empresas cotadas na CMVM

Dissertação de Mestrado apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Auditoria sob orientação da Doutora Alcina Portugal Dias

Adherend thickness effect on the tensile fracture toughness of a structural adhesive using an optical data acquisition method

Adhesive bonding is nowadays a serious candidate to replace methods such as fastening or riveting, because of attractive mechanical properties. As a result, adhesives are being increasingly used in industries such as the automotive, aerospace and construction. Thus, it is highly important to predict the strength of bonded joints to assess the feasibility of joining during the fabrication process of components (e.g. due to complex geometries) or for repairing purposes. This work studies the tensile behaviour of adhesive joints between aluminium adherends considering different values of adherend thickness (h) and the double-cantilever beam (DCB) test. The experimental work consists of the definition of the tensile fracture toughness (GIC) for the different joint configurations. A conventional fracture characterization method was used, together with a J-integral approach, that take into account the plasticity effects occurring in the adhesive layer. An optical measurement method is used for the evaluation of crack tip opening and adherends rotation at the crack tip during the test, supported by a Matlab® sub-routine for the automated extraction of these quantities. As output of this work, a comparative evaluation between bonded systems with different values of adherend thickness is carried out and complete fracture data is provided in tension for the subsequent strength prediction of joints with identical conditions.

O lean construction e a gestão de projeto na abertura e remodelação de lojas Sonae MC

Trabalho de Projeto

Resistência ao fogo de alvenarias sem função estrutural

Um incêndio é algo difícil de prever, assim como a sua consequência nos elementos de construção. Dessa forma, ao longo das últimas décadas, os elementos de construção têm sido alvo de diversos estudos a fim de avaliar os seus comportamentos quando solicitados em situação de incêndio. O International Building Code (IBC) descreve um método de cálculo analítico para a determinação da resistência ao fogo dos elementos da construção de acordo com os procedimentos de teste estabelecidos na ASTM E119 (Standard Test Methods for Fire Tests of Building Construction and Materials). Nesta dissertação foi feita uma análise desse método, que se mostrou inadequado para estimar a resistência ao fogo das alvenarias, sem função estrutural, de blocos cerâmicos e blocos de betão, uma vez que despreza qualquer efeito do ar no interior das mesmas. No seguimento desta análise, é apresentado um desenvolvimento do método descrito tendo em conta o efeito do ar. Depois de uma análise aos vários tipos de blocos cerâmicos e de betão com diferentes dimensões e geometrias foi possível obter uma relação entre a espessura equivalente de ar existente num bloco e a sua respectiva resistência ao fogo, de modo a serem obtidos os valores descritos na normalização existente. O efeito do ar mostrou ter uma maior influência na resistência ao fogo nas alvenarias constituídas por blocos cerâmicos de furação vertical, já que a sua geometria caracterizada por um elevado número de pequenos alvéolos contribui para o aumento do isolamento térmico, e consequentemente da sua resistência ao fogo. Nas alvenarias rebocadas os valores da resistência ao fogo aumentam cerca de 50%, quando revestidos com argamassa de cimento, e 70% quando revestidos com gesso, logo, o emprego de revestimentos representam uma boa alternativa para aumentar a resistência ao fogo.

Expatriates recruitment and selection for long-term international assignments in portuguese companies

Long-term international assignments’ increase requires more attention being paid for the preparation of these foreign assignments, especially on the recruitment and selection process of expatriates. This article explores how the recruitment and selection process of expatriates is developed in Portuguese companies, examining the main criteria on recruitment and selection of expatriates’ decision to send international assignments. The paper is based on qualitative case studies of companies located in Portugal. The data were collected through semi-structured interviews of 42 expatriates and 18 organisational representatives as well from nine Portuguese companies. The findings show that the most important criteria are: (1) trust from managers, (2) years in service, (3) previous technical and language competences, (4) organisational knowledge and, (5) availability. Based on the findings, the article discusses in detail the main theoretical and managerial implications. Suggestions for further research are also presented.

The influence of pre-departure training on expatriate adjustment: an empirical investigation with portuguese international assignees

This chapter examines the cross-cultural influence of training on the adjustment of international assignees. We focus on the pre-departure training (PDT) before an international assignment. It is an important topic because in the globalized world of today more and more expatriations are needed. The absence of PDT may generate the failure of the expatriation experience. Companies may neglect PDT due to cost reduction practices and ignorance of the need for it. Data were collected through semi-structured interviews to 42 Portuguese international assignees and 18 organizational representatives from nine Portuguese companies. The results suggest that companies should develop PDT programs, particularly when the cultural distance to the host country is bigger and when there is no previous experience of expatriation to that country in the company. The study is original because it details in depth the methods of PDT, its problems, and consequences. Some limitations linked to the research design and detailed in the conclusion should be overcome in future studies.

Privatization in an international mixed duopoly with environmental taxes

We study the effects of environmental and trade policies in an international duopoly serving two countries, with pollution abatement. This analysis is done in both mixed and privatized markets. The model has two stages: First, governments choose environmental taxes and import tariffs, simultaneously; then, the firms compete in the market by choosing output levels for the domestic market and to export and also abatement levels.

Estrutura metálica do teto falso da sala de comando da central Venda Nova III – acompanhamento da conceção, fabrico e montagem

O primeiro objetivo deste relatório, que adiante se desenvolve, é apresentar o trabalho realizado para a obtenção de conhecimentos que justifiquem a atribuição do grau de mestre em engenharia, no ramo das construções. O estágio, que a este trabalho dá sustentação, foi feito na empresa Metaloviana, onde foi possível acompanhar as várias fases de conceção, fabrico e montagem de um teto falso, designadamente na sala de comando da central Venda Nova III, de aproveitamento hidroelétrico. Tendo Portugal objetivos cada vez mais ambiciosos na utilização de energias renováveis, aproveitando, entre outros, os recursos hídricos para a produção de eletricidade, a EDP Produção fez estudos onde verificou que a realização de reforços de potência em aproveitamento já existentes, seria uma forma economicamente bastante atrativa e ao mesmo tempo responderia às crescentes solicitações energéticas. É neste âmbito que se insere o Reforço de Potência em Venda Nova III. A empresa Metaloviana, com instalações fabris em Viana do Castelo, tem todo um historial e capacidade, reconhecida nacional e internacionalmente. Este, confere a certeza de ter acompanhado um trabalho de ponta, devidamente creditado e fundamentado numa qualidade e mérito, por demais reconhecido.

Expatriates’ influence on knowledge sharing: an empirical study with International portuguese companies

Despite the abundant literature in knowledge management, few empirical studies have explored knowledge management in connection with international assignees. This phenomenon has a special relevance in the Portuguese context, since (a) there are no empirical studies concerning this issue that involves international Portuguese companies; (b) the national business reality is incipient as far as internationalisation is concerned, and; (c) the organisational and national culture presents characteristics that are distinctive from the most highly studied contexts (e.g., Asia, USA, Scandinavian countries, Spain, France, The Netherlands, Germany, England and Russia). We examine the role of expatriates in transfer and knowledge sharing within the Portuguese companies with operations abroad. We focus specifically on expatriates’ role on knowledge sharing connected to international Portuguese companies and our findings take into account organizational representatives’ and expatriates’ perspectives. Using a comparative case study approach, we examine how three main dimensions influence the role of expatriates in knowledge sharing among headquarters and their subsidiaries (types of international assignment, reasons for using expatriation and international assignment characteristics). Data were collected using semi‐structured interviews to 30 Portuguese repatriates and 14 organizational representatives from seven Portuguese companies. The findings suggest that the reasons that lead Portuguese companies to expatriating employees are connected to: (1) business expansion needs; (2) control of international operations and; (3) transfer and knowledge sharing. Our study also shows that Portuguese companies use international assignments in order to positively respond to the increasingly decaying domestic market in the economic areas in which they operate. Evidence also reveals that expatriation is seen as a strategy to fulfill main organizational objectives through their expatriates (e.g., business internationalization, improvement of the coordination and control level of the units/subsidiaries abroad, replication of aspects of the home base, development and incorporation of new organizational techniques and processes). We also conclude that Portuguese companies have developed an International Human Resources Management strategy, based on an ethnocentric approach, typically associated with companies in early stages of internationalization, i.e., the authority and decision making are centered in the home base. Expatriates have a central role in transmitting culture and technical knowledge from company’s headquarters to the company’s branches. Based on the findings, the article will discuss in detail the main theoretical and managerial implications. Suggestions for further research will also be presented.

Exploring why portuguese companies expatriate, and portuguese expatriates accept international assignments

This study explores (1) the reasons that lead Portuguese companies to use expatriates and (2) the motivations that led the repatriates to accepting an international assignment. Semistructured interviews were carried out on 44 individuals (14 responsible for organizational management of the expatriates and 30 repatriates), in seven international companies based in Portugal, and analysis of the thematic content was conducted for data processing. Results suggest that the reasons that lead Portuguese companies to expatriating employees are connected to business needs and the control of international operations, while individual motivations are linked to personal and professional ambition, the will to serve the company and organizational pressure. We concluded that Portuguese companies, like most European companies, seem to develop a strategy of International Human Resources Management (IHRM) according to an ethnocentric approach, characteristic to companies in early stages of internationalization. Similarly, the main motivations of Portuguese repatriates are identical to those of other expatriates, though the will to serve the company seems to be more valued by Portuguese repatriates than by expatriates from other countries.