A user-centered interface for scheduling problem definition

In this paper we present a user-centered interface for a scheduling system. The purpose of this interface is to provide graphical and interactive ways of defining a scheduling problem. To create such user interface an evaluation-centered user interaction development method was adopted: the star life cycle. The created prototype comprises the Task Module and the Scheduling Problem Module. The first one allows users to define a sequence of operations, i.e., a task. The second one enables a scheduling problem definition, which consists in a set of tasks. Both modules are equipped with a set of real time validations to assure the correct definition of the necessary data input for the scheduling module of the system. The usability evaluation allowed us to measure the ease of interaction and observe the different forms of interaction provided by each participant, namely the reactions to the real time validation mechanism.

User modeling In adaptive hypermedia educational systems

This document is a survey in the research area of User Modeling (UM) for the specific field of Adaptive Learning. The aims of this document are: To define what it is a User Model; To present existing and well known User Models; To analyze the existent standards related with UM; To compare existing systems. In the scientific area of User Modeling (UM), numerous research and developed systems already seem to promise good results, but some experimentation and implementation are still necessary to conclude about the utility of the UM. That is, the experimentation and implementation of these systems are still very scarce to determine the utility of some of the referred applications. At present, the Student Modeling research goes in the direction to make possible reuse a student model in different systems. The standards are more and more relevant for this effect, allowing systems communicate and to share data, components and structures, at syntax and semantic level, even if most of them still only allow syntax integration.

Sistema sem fios para controlo de iluminação decorativa

Este projecto surgiu no contexto da solicitação de um dos clientes da empresa Castros Iluminações que pretendia um sistema de iluminação decorativa (baseada em LED) de dois conjuntos de 288 janelas, pertencendo cada conjunto a uma fachada diferente do edifício. Este sistema teria que prever a possibilidade de controlar a cor de cada janela individualmente, dando ao cliente a possibilidade de alterar o ambiente decorativo das fachadas do edifício. A utilização de comunicação sem fios foi justificada pela necessidade de evitar a quantidade enorme de cabos que seria necessário passar utilizando os sistemas comerciais convencionais e a impossibilidade de os esconder. Esta solução foi pensada para ser implementada num edifício com 14 Andares, facto que por si só inviabiliza a passajem de cabos. Para interligar todos os dispositivos de iluminação decorativa com um controlador portátil, e eliminar os problemas ligados à cablagem, foi utilizado o protocolo de comunicações sem fios ZigBee™. A escolha recaiu neste protocolo devido a factores como os seus baixos consumos, simplicidade do protocolo comparativamente com outras redes e o seu baixo custo. No desenvolvimento deste projecto foi utilizada a stack da Microchip©, versão gratuita, disponibilizada na internet e os seus transceivers de comunicação Zigbee™, MRF24j40MA. Para fazer a interface de comunicação com o utilizador, foi desenvolvida uma aplicação de Software para correr em computadores com ambiente Windows™. Esta aplicação foi desenvolvida em Visual Studio™ utilizando a linguagem C#. Foram efectuados alguns testes para se perceber a eficiência e robustez da comunicação ZigBee™ e apesar do número de dispositivos disponíveis para ensaios ser muito reduzido, foi possível verificar que, mesmo funcionando correctamente, o desempenho do sistema poderá ser melhorado, quer seja a nível da gestão das comunicações, quer a nível do software informático para controlo do ambiente decorativo das fachadas do edifício. O sistema, no actual estado de desenvolvimento, permite controlar a cor dos vários dispositivos da rede através do computador, com uma resolução de 24bits. A aplicação desenvolvida em Visual Studio™ permite controlar de forma simples e intuitiva para o utilizador, a cor do material iluminativo dos vários dispositivos da rede.

Mismatch negativity in childhood temporal lobe epilepsy: a proposed paradigm for testing central auditory processing

Background: Temporal lobe epilepsy (TLE) is a neurological disorder that directly affects cortical areas responsible for auditory processing. The resulting abnormalities can be assessed using event-related potentials (ERP), which have high temporal resolution. However, little is known about TLE in terms of dysfunction of early sensory memory encoding or possible correlations between EEGs, linguistic deficits, and seizures. Mismatch negativity (MMN) is an ERP component – elicited by introducing a deviant stimulus while the subject is attending to a repetitive behavioural task – which reflects pre-attentive sensory memory function and reflects neuronal auditory discrimination and perceptional accuracy. Hypothesis: We propose an MMN protocol for future clinical application and research based on the hypothesis that children with TLE may have abnormal MMN for speech and non-speech stimuli. The MMN can be elicited with a passive auditory oddball paradigm, and the abnormalities might be associated with the location and frequency of epileptic seizures. Significance: The suggested protocol might contribute to a better understanding of the neuropsychophysiological basis of MMN. We suggest that in TLE central sound representation may be decreased for speech and non-speech stimuli. Discussion: MMN arises from a difference to speech and non-speech stimuli across electrode sites. TLE in childhood might be a good model for studying topographic and functional auditory processing and its neurodevelopment, pointing to MMN as a possible clinical tool for prognosis, evaluation, follow-up, and rehabilitation for TLE.

Integration of an automatic storage and retrieval system (ASRS) in a discrete-part automation system

This technical report describes the work carried out in a project within the ERASMUS programme. The objective of this project was the Integration of an Automatic Warehouse in a Discrete-Part Automation System. The discrete-part automation system located at the LASCRI (Critical Systems) laboratory at ISEP was extended with automatic storage and retrieval of the manufacturing parts, through the integration of an automatic warehouse and an automatic guided vehicle (AGV).

H-NAMe: specifying, implementing and testing a hidden-node avoidance mechanism for wireless sensor networks

The hidden-node problem has been shown to be a major source of Quality-of-Service (QoS) degradation in Wireless Sensor Networks (WSNs) due to factors such as the limited communication range of sensor nodes, link asymmetry and the characteristics of the physical environment. In wireless contention-based Medium Access Control protocols, if two nodes that are not visible to each other transmit to a third node that is visible to the formers, there will be a collision – usually called hidden-node or blind collision. This problem greatly affects network throughput, energy-efficiency and message transfer delays, which might be particularly dramatic in large-scale WSNs. This technical report tackles the hidden-node problem in WSNs and proposes HNAMe, a simple yet efficient distributed mechanism to overcome it. H-NAMe relies on a grouping strategy that splits each cluster of a WSN into disjoint groups of non-hidden nodes and then scales to multiple clusters via a cluster grouping strategy that guarantees no transmission interference between overlapping clusters. We also show that the H-NAMe mechanism can be easily applied to the IEEE 802.15.4/ZigBee protocols with only minor add-ons and ensuring backward compatibility with the standard specifications. We demonstrate the feasibility of H-NAMe via an experimental test-bed, showing that it increases network throughput and transmission success probability up to twice the values obtained without H-NAMe. We believe that the results in this technical report will be quite useful in efficiently enabling IEEE 802.15.4/ZigBee as a WSN protocol.

Effect of plug-filling, Testing velocity and temperature on the tensile strength of strap repairs on aluminium structures

In this work, an experimental study was performed on the influence of plug-filling, loading rate and temperature on the tensile strength of single-strap (SS) and double-strap (DS) repairs on aluminium structures. Whilst the main purpose of this work was to evaluate the feasibility of plug-filling for the strength improvement of these repairs, a parallel study was carried out to assess the sensitivity of the adhesive to external features that can affect the repairs performance, such as the rate of loading and environmental temperature. The experimental programme included repairs with different values of overlap length (L O = 10, 20 and 30 mm), and with and without plug-filling, whose results were interpreted in light of experimental evidence of the fracture modes and typical stress distributions for bonded repairs. The influence of the testing speed on the repairs strength was also addressed (considering 0.5, 5 and 25 mm/min). Accounting for the temperature effects, tests were carried out at room temperature (≈23°C), 50 and 80°C. This permitted a comparative evaluation of the adhesive tested below and above the glass transition temperature (T g), established by the manufacturer as 67°C. The combined influence of these two parameters on the repairs strength was also analysed. According to the results obtained from this work, design guidelines for repairing aluminium structures were

Analysis of the domain of applicability of an algorithm for a resources system selection problem for Distributed/Agile/Virtual Enterprises integration

The process of resources systems selection takes an important part in Distributed/Agile/Virtual Enterprises (D/A/V Es) integration. However, the resources systems selection is still a difficult matter to solve in a D/A/VE, as it is pointed out in this paper. Globally, we can say that the selection problem has been equated from different aspects, originating different kinds of models/algorithms to solve it. In order to assist the development of a web prototype tool (broker tool), intelligent and flexible, that integrates all the selection model activities and tools, and with the capacity to adequate to each D/A/V E project or instance (this is the major goal of our final project), we intend in this paper to show: a formulation of a kind of resources selection problem and the limitations of the algorithms proposed to solve it. We formulate a particular case of the problem as an integer programming, which is solved using simplex and branch and bound algorithms, and identify their performance limitations (in terms of processing time) based on simulation results. These limitations depend on the number of processing tasks and on the number of pre-selected resources per processing tasks, defining the domain of applicability of the algorithms for the problem studied. The limitations detected open the necessity of the application of other kind of algorithms (approximate solution algorithms) outside the domain of applicability founded for the algorithms simulated. However, for a broker tool it is very important the knowledge of algorithms limitations, in order to, based on problem features, develop and select the most suitable algorithm that guarantees a good performance.

Characterisation of noisy speech channels in 2G and 3G mobile networks

As the wireless cellular market reaches competitive levels never seen before, network operators need to focus on maintaining Quality of Service (QoS) a main priority if they wish to attract new subscribers while keeping existing customers satisfied. Speech Quality as perceived by the end user is one major example of a characteristic in constant need of maintenance and improvement. It is in this topic that this Master Thesis project fits in. Making use of an intrusive method of speech quality evaluation, as a means to further study and characterize the performance of speech codecs in second-generation (2G) and third-generation (3G) technologies. Trying to find further correlation between codecs with similar bit rates, along with the exploration of certain transmission parameters which may aid in the assessment of speech quality. Due to some limitations concerning the audio analyzer equipment that was to be employed, a different system for recording the test samples was sought out. Although the new designed system is not standard, after extensive testing and optimization of the system's parameters, final results were found reliable and satisfactory. Tests include a set of high and low bit rate codecs for both 2G and 3G, where values were compared and analysed, leading to the outcome that 3G speech codecs perform better, under the approximately same conditions, when compared with 2G. Reinforcing the idea that 3G is, with no doubt, the best choice if the costumer looks for the best possible listening speech quality. Regarding the transmission parameters chosen for the experiment, the Receiver Quality (RxQual) and Received Energy per Chip to the Power Density Ratio (Ec/N0), these were subject to speech quality correlation tests. Final results of RxQual were compared to those of prior studies from different researchers and, are considered to be of important relevance. Leading to the confirmation of RxQual as a reliable indicator of speech quality. As for Ec/N0, it is not possible to state it as a speech quality indicator however, it shows clear thresholds for which the MOS values decrease significantly. The studied transmission parameters show that they can be used not only for network management purposes but, at the same time, give an expected idea to the communications engineer (or technician) of the end-to-end speech quality consequences. With the conclusion of the work new ideas for future studies come to mind. Considering that the fourth-generation (4G) cellular technologies are now beginning to take an important place in the global market, as the first all-IP network structure, it seems of great relevance that 4G speech quality should be subject of evaluation. Comparing it to 3G, not only in narrowband but also adding wideband scenarios with the most recent standard objective method of speech quality assessment, POLQA. Also, new data found on Ec/N0 tests, justifies further research studies with the intention of validating the assumptions made in this work.

Sistema de apoio à racionalização da utilização de energia eléctrica

Esta dissertação descreve o sistema de apoio à racionalização da utilização de energia eléctrica desenvolvido no âmbito da unidade curricular de Tese/Dissertação. O domínio de aplicação enquadra-se no contexto da Directiva da União Europeia 2006/32/EC que declara ser necessário colocar à disposição dos consumidores a informação e os meios que promovam a redução do consumo e o aumento da eficiência energética individual. O objectivo é o desenvolvimento de uma solução que permita a representação gráfica do consumo/produção, a definição de tectos de consumo, a geração automática de alertas e alarmes, a comparação anónima com clientes com perfil idêntico por região e a previsão de consumo/produção no caso de clientes industriais. Trata-se de um sistema distribuído composto por front-end e back-end. O front-end é composto pelas aplicações de interface com o utilizador desenvolvidas para dispositivos móveis Android e navegadores Web. O back-end efectua o armazenamento e processamento de informação e encontra-se alojado numa plataforma de cloud computing – o Google App Engine – que disponibiliza uma interface padrão do tipo serviço Web. Esta opção assegura interoperabilidade, escalabilidade e robustez ao sistema. Descreve-se em detalhe a concepção, desenvolvimento e teste do protótipo realizado, incluindo: (i) as funcionalidades de gestão e análise de consumo e produção de energia implementadas; (ii) as estruturas de dados; (iii) a base de dados e o serviço Web; e (iv) os testes e a depuração efectuados. (iv) Por fim, apresenta-se o balanço deste projecto e efectuam-se sugestões de melhoria.

Aquaponics System - An EPS@ISEP 2014 Spring Project

The goal of this project, one of the proposals of the EPS@ISEP 2014 Spring, was to develop an Aquaponics System. Over recent years Aquaponics systems have received increased attention due to its possibilities in helping reduce strain on resources within 1st and 3rd world countries. Aquaponics is the combination of Hydroponics and Aquaculture and mimics a natural environment in order to successfully apply and enhance the understanding of natural cycles within an indoor process. By using this knowledge of natural cycles it was possible to create a system with the capabilities similar to that of a natural environment with the benefits of electronic adaptions to enhance the overall efficiency of the system. The multinational team involved in its development was composed of five students, from five countries and fields of study. This paper covers their solution, involving overall design, the technology involved and the benefits it could bring to the current market. The team was able to achieve the final rendered Computer Aided Design (CAD) drawings, successfully performed all the electronic testing, and designed a solution under budget. Furthermore, the solution presented was deeply studied from the sustainability viewpoint and the team also developed a product specific marketing plan. Finally, the students involved in this project obtained new knowledge and skills.

HIV Voluntary Testing among Portuguese Women Attending Family Planning Clinics: Implications for HIV Prevention Education and Testing

Objectives: The aim of this article is to analyze the factors associated with HIV testing among 767 sexually active women. Methods: Participants were administered several self-report questionnaires that assessed behavioral and psychosocial measures. Results: Overall, 59.8% of the participants reported ever having tested for HIV. Results show that higher levels of education, being pregnant or having been pregnant, concern about AIDS, AIDS knowledge, self-efficacy in condom negotiation and perception of no risk in partner significantly predicted the likelihood of testing among women. Attending the mass was negatively associated with HIV testing. Conclusions: These findings provide information that can be used in the development of a focused gender sensitive HIV prevention program to increase HIV testing.

XATA 2010 : XML : Associated Technologies and Applications, 8th

These are the proceedings for the eighth national conference on XML, its Associated Technologies and its Applications (XATA'2010). The paper selection resulted in 33% of papers accepted as full papers, and 33% of papers accepted as short papers. While these two types of papers were distinguish during the conference, and they had different talk duration, they all had the same limit of 12 pages. We are happy that the selected papers focus both aspects of the conference: XML technologies, and XML applications. In the first group we can include the articles on parsing and transformation technologies, like “Processing XML: a rewriting system approach", “Visual Programming of XSLT from examples", “A Refactoring Model for XML Documents", “A Performance based Approach for Processing Large XML Files in Multicore Machines", “XML to paper publishing with manual intervention" and “Parsing XML Documents in Java using Annotations". XML-core related papers are also available, focusing XML tools testing on “Test::XML::Generator: Generating XML for Unit Testing" and “XML Archive for Testing: a benchmark for GuessXQ". XML as the base for application development is also present, being discussed on different areas, like “Web Service for Interactive Products and Orders Configuration", “XML Description for Automata Manipulations", “Integration of repositories in Moodle", “XML, Annotations and Database: a Comparative Study of Metadata Definition Strategies for Frameworks", “CardioML: Integrating Personal Cardiac Information for Ubiquous Diagnosis and Analysis", “A Semantic Representation of Users Emotions when Watching Videos" and “Integrating SVG and SMIL in DAISY DTB production to enhance the contents accessibility in the Open Library for Higher Education". The wide spread of subjects makes us believe that for the time being XML is here to stay what enhances the importance of gathering this community to discuss related science and technology. Small conferences are traversing a bad period. Authors look for impact and numbers and only submit their works to big conferences sponsored by the right institutions. However the group of people behind this conference still believes that spaces like this should be preserved and maintained. This 8th gathering marks the beginning of a new cycle. We know who we are, what is our identity and we will keep working to preserve that. We hope the publication containing the works of this year's edition will catch the same attention and interest of the previous editions and above all that this publication helps in some other's work. Finally, we would like to thank all authors for their work and interest in the conference, and to the scientific committee members for their review work.

Sistema para avaliação das vibrações no braço e ombro de um tenista

Este trabalho propõe o desenvolvimento de um módulo capaz de medir a intensidade das vibrações sofridas por um tenista no braço e ombro durante um jogo. Numa primeira fase foi estudada a biomecânica do braço humano e a biomecânica dos movimentos envolvidos no ténis. Foi realizada uma pesquisa sobre os dispositivos MEMs mais adequados bem como o hardware e software a utilizar, tendo sido analisados os requisitos do sistema a implementar. Foi desenvolvido um protótipo electrónico microcontrolado compacto e de baixo custo baseado na utilização de sensores microeletromecânicos (MEMs) de aceleração, permitindo obter informações biomecânicas do desportista e monitoriza-lo durante o treino de maneira não evasiva, possibilitando que ele esteja no seu ambiente natural de treino. O sistema envia as informações dos sensores para um PC através da porta USB sendo estas processados no mesmo. Foi desenvolvida uma interface gráfica intuitiva, para a apresentação dos dados resultantes das medidas, de fácil leitura pelos treinadores. Esta interface grava e apresenta os dados em tempo real. Os testes de campo foram realizados no campo de ténis que existe na Quinta das Freiras em Rio Tinto. O protótipo é de fácil fixação no atleta e permite a monitorização no local de treino sendo pequeno ((20x15mm) e muito leve (2g), tornando-se uma alternativa versátil para o auxilio de atletas e treinadores, aperfeiçoamento da técnica e como ferramenta de pesquisa na área de educação física.

Tecnologias Multimédia no Apoio ao Ensino da Assistência Pré-Hospitalar

Vivemos num mundo em constante mudança, onde a evolução tecnológica está cada vez mais presente no nosso quotidiano e as suas influências são inúmeras nas nossas vidas. Por outro lado, a vida humana é algo extremamente valioso e único pelo que a sociedade, também nessa área, tem procurado evoluir e dotar-se de novos meios e mecanismos de atuação, que possibilitem um socorro rápido e adequado em situações que possam em algum momento pôr em perigo a vida do ser humano. Pretendemos com o presente estudo, correlacionar estas duas vertentes, a do socorro á vítima para apoio á vida humana e a tecnologia no sentido de contribuir para uma formação mais distribuída mas ao mesmo tempo capaz de transmitir conhecimentos necessários á formação dos que socorrem. Para o efeito, planeamos o desenvolvimento de um Objeto de Aprendizagem (OA) denominado CiTAT (Curso Interativo de Tripulante de Ambulância de Transporte) que tem como objetivo acrescentar valor a todos os que são obrigados a frequentar o curso em regime presencial de Tripulante de Ambulância de Transporte (TAT). Após uma fase de análise do estado da arte relacionada com este tipo de formação, e após termos percebido como funciona e que tipos de recursos utilizam, analisámos temas relacionados com este tipo de formação como o “Sistema Integrado de Emergência Médica” o “Exame á Vítima”, o “Suporte Básico de Vida” e as “Emergências de Trauma”. Percebemos que a mudança de paradigma de formação das pessoas passou a ter novas formas de distribuir conhecimento em formato digital e que proporciona aos formandos um ensino distribuído em formatos de e-learning ou de b-learning. Os Objetos de Aprendizagem (OA) parecem assumir um relevo especial no ensino da área da saúde, abordando áreas temáticas e proporcionando aos seus utilizadores mecanismos de autoavaliação após a visualização dos conteúdos pedagógicos. Após o desenho do modelo concetual do CiTAT, avançamos para a produção de recursos necessários para a sua integração no OA. Após uma fase de testes e ajustes, avançamos para a sua avaliação final por parte dos utilizadores e preparamos um questionário para aferir o potencial de utilização deste tipo de soluções no ensino de TAT, atendendo ao facto de ser uma formação obrigatória e cuja recertificação é feita de três em três anos. O passo final foi a sua distribuição ao nível global, sendo o CiTAT catalogado com metadados e colocado no repositório MERLOT.