TIGRE - An autonomous ground robot for outdoor exploration

13th International Conference on Autonomous Robot Systems (Robotica), 2013

Real-Time Visual Ground-Truth System for Indoor Robotic Applications

The robotics community is concerned with the ability to infer and compare the results from researchers in areas such as vision perception and multi-robot cooperative behavior. To accomplish that task, this paper proposes a real-time indoor visual ground truth system capable of providing accuracy with at least more magnitude than the precision of the algorithm to be evaluated. A multi-camera architecture is proposed under the ROS (Robot Operating System) framework to estimate the 3D position of objects and the implementation and results were contextualized to the Robocup Middle Size League scenario.

Calibration Method for Underwater Visual Ground-Truth System

This work presents an automatic calibration method for a vision based external underwater ground-truth positioning system. These systems are a relevant tool in benchmarking and assessing the quality of research in underwater robotics applications. A stereo vision system can in suitable environments such as test tanks or in clear water conditions provide accurate position with low cost and flexible operation. In this work we present a two step extrinsic camera parameter calibration procedure in order to reduce the setup time and provide accurate results. The proposed method uses a planar homography decomposition in order to determine the relative camera poses and the determination of vanishing points of detected lines in the image to obtain the global pose of the stereo rig in the reference frame. This method was applied to our external vision based ground-truth at the INESC TEC/Robotics test tank. Results are presented in comparison with an precise calibration performed using points obtained from an accurate 3D LIDAR modelling of the environment.

Sustainability Improvement of a composite materials’ industry through recycling and re-engineering process approaches

Recent Advances in Mechanics and Materials in Design

Strength improvement of adhesively-bonded scarf repairs in aluminium structures with external reinforcements

Adhesively bonded techniques are an attractive option to repair aluminium structures, compared to more traditional methods. Actually, as a result of the improvement in the mechanical characteristics of adhesives, adhesive bonding has progressively replaced the traditional joining methods. There are several bonded repair configurations, as single-strap, double-strap and scarf. Compared with strap repairs, scarf repairs have the advantages of a higher efficiency and the absence of aerodynamic disturbance. The higher efficiency is caused by the elimination of the significant joint eccentricities of strap repairs. Moreover, stress distributions along the bond length are more uniform, due to tapering of the scarf edges. The main disadvantages of this technique are the difficult machining of the surfaces, associated costs and requirement of specialised labour. This work reports on an experimental and numerical study of the tensile behaviour of two-dimensional (2D) scarf repairs of aluminium structures bonded with the ductile epoxy adhesive Araldite® 2015. The numerical analysis, by Finite Elements (FE), was performed in Abaqus® and used cohesive zone models (CZM) for the simulation of damage onset and growth in the adhesive layer, thus enabling the strength prediction of the repairs. A parametric study was performed on the scarf angle (α) and different configurations of external reinforcement (applied on one or two sides of the repair, and also different reinforcement lengths). The obtained results allowed the establishment of design guidelines for repairing, showing that the use of external reinforcements enables increasing α for equal strength recovery, which makes the repair procedure easier. The numerical technique was accurate in predicting the repairs’ strength, enabling its use for design and optimisation purposes.

The influence of gait cadence on the ground reaction forces and plantar pressures during load carriage of young adults

Biomechanical gait parameters—ground reaction forces (GRFs) and plantar pressures—during load carriage of young adults were compared at a low gait cadence and a high gait cadence. Differences between load carriage and normal walking during both gait cadences were also assessed. A force plate and an in-shoe plantar pressure system were used to assess 60 adults while they were walking either normally (unloaded condition) or wearing a backpack (loaded condition) at low (70 steps per minute) and high gait cadences (120 steps per minute). GRF and plantar pressure peaks were scaled to body weight (or body weight plus backpack weight). With medium to high effect sizes we found greater anterior-posterior and vertical GRFs and greater plantar pressure peaks in the rearfoot, forefoot and hallux when the participants walked carrying a backpack at high gait cadences compared to walking at low gait cadences. Differences between loaded and unloaded conditions in both gait cadences were also observed.

Análise biomecânica da marcha e funcionalidade em crianças com Paralisia Cerebral: efeito da intervenção da fisioterapia com facilitação em tapete rolante

Introdução: As crianças com Paralisia Cerebral evidenciam frequentemente alterações da sua funcionalidade global, evidenciadas nomeadamente na marcha. Diferentes protocolos de facilitação da marcha em tapete rolante têm vindo a ser alvo de estudos no sentido de clarificar a sua eficácia nesta população. Estes sugerem uma evolução positiva dos diferentes aspectos estudados (funcionalidade global, resistência cardiorespiratória, componentes da marcha), contudo utilizam diferentes metodologias e especificidades do protocolo, não existindo consenso acerca das melhores condições de utilização. Objectivo(s): O presente trabalho teve como objectivo principal avaliar o efeito da aplicação de um protocolo de marcha em tapete rolante (PMTR) em crianças com Paralisia Cerebral (PC) espástica, nos parâmetros biomecânicos da mesma e funcionalidade global. Métodos: Participaram no estudo 9 crianças com PC do tipo diplégico e hemiplégico inscritos na Associação de Paralisia Cerebral de Braga (APCB), com idades compreendidas entre os 3 e os 8 anos de idade. Cada criança foi avaliada antes e após a aplicação do PMTR, através da análise biomecânica da marcha (dinamometria e electromiografia de superfície), bem como da aplicação do teste de medida da função motora (TMFM). A amostra foi dividida em dois grupos – grupo sujeito ao protocolo de marcha em tapete rolante (GPMTR) (n=5) e grupo controlo (GC) (n=4). O protocolo em tapete rolante foi incluído nas sessões de intervenção de fisioterapia, com uma frequência semanal de 2 a 3 vezes por semana, durante um período de 10 semanas consecutivas, após o qual foram repetidas as avaliações iniciais. Resultados: A análise dos resultados permitiu verificar evoluções no GPMTR ao nível do score total da TMFM e especialmente na dimensão E, o que revelou melhorias significativas da funcionalidade motora global neste grupo. Verificaram-se ainda, em termos eletromiográficos um melhor padrão de recrutamento muscular, bem como, no que se refere à análise dinamométrica, evoluções positivas, na componente vertical das forças de reacção do solo.Conclusão: O presente estudo parece sugerir que a inclusão da facilitação da marcha em tapete rolante no plano de intervenção pode contribuir para uma melhoria nos parâmetros biomecânicos da marcha e funcionalidade global de crianças com Paralisia Cerebral do tipo diplégico e hemiplégico, com idades compreendidas entre os 3 e os 8 anos.