Growth of the [110] oriented TiO2 nanorods on ITO substrates by sputtering technique for dye-sensitized solar cells

TiO2 films have been deposited on ITO substrates by dc reactive magnetron sputtering technique. It has been found that the sputtering pressure is a very important parameter for the structure of the deposited TiO2 films. When the pressure is lower than 1 Pa, the deposited has a dense structure and shows a preferred orientation along the [101] direction. However, the nanorod structure has been obtained as the sputtering pressure is higher than 1 Pa. These nanorods structure TiO2 film shows a preferred orientation along the [110] direction. The x-ray diffraction and the Raman scattering measurements show both the dense and the nanostructure TiO2 films have only an anatase phase, no other phase has been obtained. The results of the SEM show that these TiO2 nanorods are perpendicular to the ITO substrate. The TEM measurement shows that the nanorods have a very rough surface. The dye-sensitized solar cells (DSSCs) have been assembled using these TiO2 nanorod films prepared at different sputtering pressures as photoelectrode. And the effect of the sputtering pressure on the properties of the photoelectric conversion of the DSSCs has been studied.

ESEIG Mobile: an m-learning approach in a superior school

In recent years, mobile learning has emerged as an educational approach to decrease the limitation of learning location and adapt the teaching-learning process to all type of students. However, the large number and variety of Web-enabled devices poses challenges for Web content creators who want to automatic get the delivery context and adapt the content to mobile devices. This paper studies several approaches to adapt the learning content to mobile phones. It presents an architecture for deliver uniform m-Learning content to students in a higher School. The system development is organized in two phases: firstly enabling the educational content to mobile devices and then adapting it to all the heterogeneous mobile platforms. With this approach, Web authors will not need to create specialized pages for each kind of device, since the content is automatically transformed to adapt to any mobile device capabilities from WAP to XHTML MP-compliant devices.

Finding a school technological partner: a multicriteria method for school information system producer selection

The choice of an information systems is a critical factor of success in an organization's performance, since, by involving multiple decision-makers, with often conflicting objectives, several alternatives with aggressive marketing, makes it particularly complex by the scope of a consensus. The main objective of this work is to make the analysis and selection of a information system to support the school management, pedagogical and administrative components, using a multicriteria decision aid system – MMASSITI – Multicriteria Method- ology to Support the Selection of Information Systems/Information Technologies – integrates a multicriteria model that seeks to provide a systematic approach in the process of choice of Information Systems, able to produce sustained recommendations concerning the decision scope. Its application to a case study has identi- fied the relevant factors in the selection process of school educational and management information system and get a solution that allows the decision maker’ to compare the quality of the various alternatives.

Analysis of the mismatch between school furniture and children

The characteristics of school furniture are strongly associated with back and neck pain, referred by school-aged children. In Portugal, about 60% of the adolescents involved in a recent study reported having felt back pain at least once in the last three months. The aim of this study was to compare furniture sizes of the 2 types indicated for primary schools, within 9 schools, with the anthropometric characteristics of Portuguese students, in order to evaluate the mismatch between them. The sample consisted of 432 volunteer students. Regarding the methodology, 5 anthropometric measures were gathered, as well as 5 dimensions from the school furniture. For the evaluation of classroom furniture, a (mis)match criterion equation was defined. Results indicated that there is a significant mismatch between furniture dimensions and the anthropometric characteristics of the students.

The Digital Textbook: Methodological and Didactic Challenges for Primary School

The potentialities of ICT in education bring about changes in the teaching and learning methodologies, in the places where you learn and in the way you learn. This demands a reflection not only on the ways of learning, but also on the support resources, so that learning can take place and, of course, it is indispensable to understand the teachers’ answer to the digital challenges. Thus, the purpose of this analysis is to reflect about technological trends in an educational context and their underlying models by analyzing the role played by digital textbooks in Portugal in an innovating context. This way, we intend to contribute to an educational policy as we plan to relate the teachers’ training to the increasing development of the digital textbooks and we also intend to contribute to the understanding of a didactic resource which is closely related to the learning processes which resort to advanced technology.

Children’s Indoor Exposures to (Ultra)Fine Particles in an Urban Area: Comparison Between School and Home Environments

Due to their detrimental effects on human health, scientific interest in ultrafine particles (UFP), has been increasing but available information is far from comprehensive. Children, who represent one of the most susceptible subpopulation, spend the majority of time in schools and homes. Thus, the aim of this study is to (1) assess indoor levels of particle number concentrations (PNC) in ultrafine and fine (20–1000 nm) range at school and home environments and (2) compare indoor respective dose rates for 3- to 5-yr-old children. Indoor particle number concentrations in range of 20–1000 nm were consecutively measured during 56 d at two preschools (S1 and S2) and three homes (H1–H3) situated in Porto, Portugal. At both preschools different indoor microenvironments, such as classrooms and canteens, were evaluated. The results showed that total mean indoor PNC as determined for all indoor microenvironments were significantly higher at S1 than S2. At homes, indoor levels of PNC with means ranging between 1.09 × 104 and 1.24 × 104 particles/cm3 were 10–70% lower than total indoor means of preschools (1.32 × 104 to 1.84 × 104 particles/cm3). Nevertheless, estimated dose rates of particles were 1.3- to 2.1-fold higher at homes than preschools, mainly due to longer period of time spent at home. Daily activity patterns of 3- to 5-yr-old children significantly influenced overall dose rates of particles. Therefore, future studies focusing on health effects of airborne pollutants always need to account for children’s exposures in different microenvironments such as homes, schools, and transportation modes in order to obtain an accurate representation of children overall exposure.

Effective swimmer’s action during the grab start technique

The external forces applied in swimming starts have been often studied, but using direct analysis and simple interpretation data processes. This study aimed to develop a tool for vertical and horizontal force assessment based on the swimmers' propulsive and structural forces (passive forces due to dead weight) applied during the block phase. Four methodological pathways were followed: the experimented fall of a rigid body, the swimmers' inertia effect, the development of a mathematical model to describe the outcome of the rigid body fall and its generalization to include the effects of the inertia, and the experimental swimmers' starting protocol analysed with the inclusion of the developed mathematical tool. The first three methodological steps resulted in the description and computation of the passive force components. At the fourth step, six well-trained swimmers performed three 15 m maximal grab start trials and three-dimensional (3D) kinetic data were obtained using a six degrees of freedom force plate. The passive force contribution to the start performance obtained from the model was subtracted from the experimental force due to the swimmers resulting in the swimmers' active forces. As expected, the swimmers' vertical and horizontal active forces accounted for the maximum variability contribution of the experimental forces. It was found that the active force profile for the vertical and horizontal components resembled one another. These findings should be considered in clarifying the active swimmers' force variability and the respective geometrical profile as indicators to redefine steering strategies.

The importance of physical education classes in pre-school children

The purpose of this study was to analyse differences between total physical activity (TPA) and moderate-to-vigorous PA (MVPA) of pre-school children during daily school hours when they attended the physical education class (PED) and school days without PE class (NPED) and to assess the contribution of PE classes to TPA in school hours. The sample was composed of 193 pre-school healthy children (96 girls) aged from three to five years old and was conducted between February and December of 2008. Children wore accelerometers for at least four consecutive days during school hours. Data were analysed with specific software, age-specific counts-per-minute cut-off points and a 5 s epoch were used. Independent and general linear model repeated measures were used to assess differences between gender and differences between different days within each gender, respectively. Boys engaged more MVPA than girls (P < 0.05). During PED, pre-school children engaged significantly more in TPA and MVPA than during NPED (P < 0.05). PE class contributed, on average, 27.7% for the TPA and 32.8% of daily MVPA during PED in both gender. The results of this study suggest that structured PA such as a PE class increased the daily TPA and MVPA level of pre-school children.

Diversidade de culturas organizacionais: obstáculos e desafios para a liderança de um mega agrupamento

Este projeto tem por base um problema identificado num mega agrupamento de um concelho do grande porto, criado em junho de 2012, e que se centra nas dificuldades de gestão e liderança de uma organização resultante da agregação de duas unidades com culturas organizacionais distintas. Na perspetiva de conhecermos e compreendermos o problema e respondermos ao nosso questionamento, optamos por uma metodologia qualitativa seguindo o método de um estudo de caso. No estudo empírico, cuja técnica de recolha foi um focus group, recolheram-se as perceções dos professores das unidades agregadas sobre a criação da nova organização, sobre o impacto nas identidades e culturas organizacionais, sobre a forma da procura de uma coesão no respeito pela diversidade e identificaram-se os quadros de referência das escolas que se agregaram. O estudo realizado permite reconhecer que as dificuldades ao nível da gestão e liderança se confinam mais na escola que perdeu a centralidade e que se sente numa posição periférica. Na elaboração do plano de ação recuperámos e valorizámos a ideia de que um modelo de liderança baseado em valores poderia ser um caminho para a unidade. Neste sentido o plano de ação, com base em alguns princípios de atuação e definição de estratégias tenta dar resposta à questão de partida e em congruência com um modelo de liderança por valores.