A survey of wireless technologies coexistence in WBAN: analysis and open research issues

Wireless Body Area Network (WBAN) is the most convenient, cost-effective, accurate, and non-invasive technology for e-health monitoring. The performance of WBAN may be disturbed when coexisting with other wireless networks. Accordingly, this paper provides a comprehensive study and in-depth analysis of coexistence issues and interference mitigation solutions in WBAN technologies. A thorough survey of state-of-the art research in WBAN coexistence issues is conducted. The survey classified, discussed, and compared the studies according to the parameters used to analyze the coexistence problem. Solutions suggested by the studies are then classified according to the followed techniques and concomitant shortcomings are identified. Moreover, the coexistence problem in WBAN technologies is mathematically analyzed and formulas are derived for the probability of successful channel access for different wireless technologies with the coexistence of an interfering network. Finally, extensive simulations are conducted using OPNET with several real-life scenarios to evaluate the impact of coexistence interference on different WBAN technologies. In particular, three main WBAN wireless technologies are considered: IEEE 802.15.6, IEEE 802.15.4, and low-power WiFi. The mathematical analysis and the simulation results are discussed and the impact of interfering network on the different wireless technologies is compared and analyzed. The results show that an interfering network (e.g., standard WiFi) has an impact on the performance of WBAN and may disrupt its operation. In addition, using low-power WiFi for WBANs is investigated and proved to be a feasible option compared to other wireless technologies.

Autoconsumo fotovoltaico, um elemento de eficiência energética. Caso de estudo: ISEP

Mestrado em Energias Sustentáveis

Pulseira inteligente para monitorização de funções vitais

A crescente utilização de dispositivos móveis com diferentes finalidades é uma realidade. Com estes dispositivos, o utilizador tem a necessidade de aceder e usar dados em tempo real provenientes de diversas fontes. Uma tendência acentuada passa pela incorporação destes dispositivos móveis no vestuário, designados por dispositivos wearable. Segundo a empresa IMS Research, o mercado deste tipo de dispositivos irá aumentar de 14 milhões de unidades registadas no presente ano (2013), para cerca de 171 milhões em 2016, sendo esta previsão conservadora, segundo o analista da IMS Research, Theo Ahadome [15]. A maioria dos dispositivos portáteis está atualmente projetada para questões de saúde, como a monitorização do nível de glicose e batimento cardíaco. O objetivo deste trabalho passa por definir e implementar um dispositivo wearable para aplicações de saúde com um conjunto de funcionalidades para monitorização dos sinais vitais do utilizador. Posteriormente esta base pode ser aplicada em cenários de aplicação distintos, em que todos os dispositivos comunicam entre si, e fazem o reencaminhamento da informação para onde mais interessar. Foi desenhado e implementado hardware e software, para a construção de aplicações capazes de realizar a monitorização do batimento cardíaco, temperatura e humidade corporal, deteção de quedas, qualidade do sono, e chamadas de emergência. Este trabalho aborda os diferentes cenários e aplicações da utilização deste dispositivo, invocando as necessidades específicas de cada situação, sendo estas necessidades trabalhadas e transformadas em características e especificações do sistema. A plataforma de hardware e software permite criar um ecossistema de aplicações, permitindo usar todas as infraestruturas do sistema desenvolvido em futuros cenários de aplicação.

Decentralized Target Tracking based on Multi-Robot Cooperative Triangulation

Target tracking with bearing-only sensors is a challenging problem when the target moves dynamically in complex scenarios. Besides the partial observability of such sensors, they have limited field of views, occlusions can occur, etc. In those cases, cooperative approaches with multiple tracking robots are interesting, but the different sources of uncertain information need to be considered appropriately in order to achieve better estimates. Even though there exist probabilistic filters that can estimate the position of a target dealing with incertainties, bearing-only measurements bring usually additional problems with initialization and data association. In this paper, we propose a multi-robot triangulation method with a dynamic baseline that can triangulate bearing-only measurements in a probabilistic manner to produce 3D observations. This method is combined with a decentralized stochastic filter and used to tackle those initialization and data association issues. The approach is validated with simulations and field experiments where a team of aerial and ground robots with cameras track a dynamic target.

Energy Harvesting for Autonomous Underwater Vehicles

In this study, energy production for autonomous underwater vehicles is investigated. This project is part of a bigger project called TURTLE. The autonomous vehicles perform oceanic researches at seabed for which they are intended to be kept operational underwater for several months. In order to ful l a long-term underwater condition, powerful batteries are combined with \micro- scale" energy production on the spot. This work tends to develop a system that generates power up to a maximum of 30 W. Latter energy harvesting structure consists basically of a turbine combined with a generator and low-power electronics to adjust the achieved voltage to a required battery charger voltage. Every component is examined separately hence an optimum can be de ned for all, and subsequently also an overall optimum. Di erent design parameters as e.g. number of blades, solidity ratio and cross-section area are compared for di erent turbines, in order to see what is the most feasible type. Further, a generator is chosen by studying how ux distributions might be adjusted to low velocities, and how cogging torque can be excluded by adapted designs. Low-power electronics are con gured in order to convert and stabilize heavily varying three-phase voltages to a constant, recti ed voltage which is usable for battery storage. Clearly, di erent component parameters as maximum power and torque are matched here to increase the overall power generation. Furthermore an overall maximum power is set up for achieving a maximum power ow at load side. Due to among others typical low velocities of about 0.1 to 0.5 m/s, and constructing limits of the prototype, the vast range of components is restricted to only a few that could be used. Hence, a helical turbine is combined in a direct drive mode to a coreless-stator axial- ux permanent-magnet generator, from which the output voltage is adjusted subsequently by a recti er, impedance matching unit, upconverter circuit and an overall control unit to regulate di erent component parameters. All these electronics are combined in a closed-loop design to involve positive feedback signals. Furthermore a theoretical con guration for the TURTLE vehicle is described in this work and a solution is proposed that might be implemented, for which several design tests are performable in a future study.

Myoelectric Signal Monitoring System

The Electromyography (EMG) is an important tool for gait analyzes and disorders diagnoses. Traditional methods involve equipment that can disturb the analyses, being gradually substituted by different approaches, like wearable and wireless systems. The cable replacement for autonomous systems demands for technologies capable of meeting the power constraints. This work presents the development of an EMG and kinematic data capture wireless module, designed taking into account power consumption issues. This module captures and converts the analog myoeletric signal to digital, synchronously with the capture of kinetic information. Both data are time multiplexed and sent to a PC via Bluetooth link. The work carried out comprised the development of the hardware, the firmware and a graphical interface running in an external PC. The hardware was developed using the PIC18F14K22, a low power family of microcontrollers. The link was established via Bluetooth, a protocol designed for low power communication. An application was also developed to recover and trace the signal to a Graphic User Interface (GUI), coordinating the message exchange with the firmware. Results were obtained which allowed validating the conceived system in static and with the subject performing short movements. Although it was not possible to perform the tests within more dynamic movements, it is shown that it is possible to capture, transmit and display the captured data as expected. Some suggestions to improve the system performance also were made.

mRPL: Boosting mobility in the Internet of Things

The 6loWPAN (the light version of IPv6) and RPL (routing protocol for low-power and lossy links) protocols have become de facto standards for the Internet of Things (IoT). In this paper, we show that the two native algorithms that handle changes in network topology – the Trickle and Neighbor Discovery algorithms – behave in a reactive fashion and thus are not prepared for the dynamics inherent to nodes mobility. Many emerging and upcoming IoT application scenarios are expected to impose real-time and reliable mobile data collection, which are not compatible with the long message latency, high packet loss and high overhead exhibited by the native RPL/6loWPAN protocols. To solve this problem, we integrate a proactive hand-off mechanism (dubbed smart-HOP) within RPL, which is very simple, effective and backward compatible with the standard protocol. We show that this add-on halves the packet loss and reduces the hand-off delay dramatically to one tenth of a second, upon nodes’ mobility, with a sub-percent overhead. The smart-HOP algorithm has been implemented and integrated in the Contiki 6LoWPAN/RPL stack (source-code available on-line mrpl: smart-hop within rpl, 2014) and validated through extensive simulation and experimentation.

Energy-efficient MAC protocols for WBANs: Opportunities and challenges

Wireless body area networks (WBANs) are expected to play a significant role in smart healthcare systems. One of the most important attributes of WBANs is to increase network lifetime by introducing novel and low-power techniques on the energy-constrained sensor nodes. Medium access control (MAC) protocols play a significant role in determining the energy consumption in WBANs. Existing MAC protocols are unable to accommodate communication requirements in WBANs. There is a need to develop novel, scalable and reliable MAC protocols that must be able to address all these requirements in a reliable manner. In this special issue, we attracted high quality research and review papers on the recent advances in MAC protocols for WBANs.

Caracterização da tecnologia de frio comercial e profissional

Hoje em dia a preocupação ambiental e a economia são fatores de sustentabilidade que são tidos em conta em países desenvolvidos, especialmente no seio da União Europeia. Reduzir os consumos de energia é, portanto, um ponto-chave para a redução das emissões de gases com efeito de estufa e aumentar a dependência das energias renováveis. Consequentemente surge então a necessidade de aumentar a eficiência dos equipamentos, em particular no presente caso, equipamentos de refrigeração. Para isso foi adotado pela Comissão Europeia uma rotulagem nos produtos consumidores de energia, em particular na refrigeração, os frigoríficos e congeladores domésticos permitindo informar o consumidor para os equipamentos mais eficientes. Mais recentemente, frigoríficos comerciais e profissionais também terão obrigatoriedade de incluir um rótulo energético na parte externa dos mesmos. Nesses rótulos estão incluídas várias informações técnicas do aparelho representadas de uma forma compreensível e lúdica aos olhos do consumidor mais leigo, entre as quais as classes de eficiência energética. As classes de eficiência energética caracterizam-se pela componente tecnológica dos frigoríficos. Perceber quais os componentes e materiais em particular que promovem uma melhor eficiência, quantificar a sua influência e avaliar os seus custos de integração torna-se assim essencial para toda a cadeia envolvida na produção destes equipamentos. Os fluídos frigorigénios e compressores aparentam ser os que mais exercem influência na eficiência de frigoríficos de baixa potência. Tubos capilares com trocador de calor são uma escolha mais eficiente comparado com o tubo capilar padrão que é utilizado nestes frigoríficos. Por forma a obter informação adicional e relevante do ponto de vista da análise energética realizaram-se simulações para determinação do consumo elétrico anual com recurso ao software Pack Calculation Pro. Entre os fluídos frigorigénios R-134a, R-22 e R-410a, os compressores scroll apresentaram consumos mais reduzidos (no máximo de 16%) do que os compressores alternativos. No caso do amoníaco (R-717) os compressores alternativos consumiram em média 14% menos do que os compressores parafuso. O recurso a velocidade variável em compressores permite reduzir o consumo na ordem dos 25%. Válvulas de expansão eletrónicas trazem reduções no consumo de 1,5% quando comparadas com válvulas de expansão termostáticas em compressores de velocidade variável. O propano (R-290) é um gás que mostra ter um melhor desempenho do que o R-134a e R404a em vários compressores, consumindo 16% menos do que o R-404a. Em função da temperatura exterior, o R-290 também apresentou um bom desempenho consumindo em climas quentes (Belém, Brasil) 24% menos do que o R-404a.

Using demand response to deal with unexpected low wind power generation in the context of smart grid

Demand response is assumed an essential resource to fully achieve the smart grids operating benefits, namely in the context of competitive markets. Some advantages of Demand Response (DR) programs and of smart grids can only be achieved through the implementation of Real Time Pricing (RTP). The integration of the expected increasing amounts of distributed energy resources, as well as new players, requires new approaches for the changing operation of power systems. The methodology proposed aims the minimization of the operation costs in a smart grid operated by a virtual power player. It is especially useful when actual and day ahead wind forecast differ significantly. When facing lower wind power generation than expected, RTP is used in order to minimize the impacts of such wind availability change. The proposed model application is here illustrated using the scenario of a special wind availability reduction day in the Portuguese power system (8th February 2012).

Virtual Power Player Using Demand Response to Deal with Unexpected Low Wind Power Generation

Demand response is assumed as an essential resource to fully achieve the smart grids operating benefits, namely in the context of competitive markets and of the increasing use of renewable-based energy sources. Some advantages of Demand Response (DR) programs and of smart grids can only be achieved through the implementation of Real Time Pricing (RTP). The integration of the expected increasing amounts of distributed energy resources, as well as new players, requires new approaches for the changing operation of power systems. The methodology proposed in this paper aims the minimization of the operation costs in a distribution network operated by a virtual power player that manages the available energy resources focusing on hour ahead re-scheduling. When facing lower wind power generation than expected from day ahead forecast, demand response is used in order to minimize the impacts of such wind availability change. In this way, consumers actively participate in regulation up and spinning reserve ancillary services through demand response programs. Real time pricing is also applied. The proposed model is especially useful when actual and day ahead wind forecast differ significantly. Its application is illustrated in this paper implementing the characteristics of a real resources conditions scenario in a 33 bus distribution network with 32 consumers and 66 distributed generators.

A framework for using real data with distributed low cost sensors

Currently, due to the widespread use of computers and the internet, students are trading libraries for the World Wide Web and laboratories with simulation programs. In most courses, simulators are made available to students and can be used to proof theoretical results or to test a developing hardware/product. Although this is an interesting solution: low cost, easy and fast way to perform some courses work, it has indeed major disadvantages. As everything is currently being done with/in a computer, the students are loosing the “feel” of the real values of the magnitudes. For instance in engineering studies, and mainly in the first years, students need to learn electronics, algorithmic, mathematics and physics. All of these areas can use numerical analysis software, simulation software or spreadsheets and in the majority of the cases data used is either simulated or random numbers, but real data could be used instead. For example, if a course uses numerical analysis software and needs a dataset, the students can learn to manipulate arrays. Also, when using the spreadsheets to build graphics, instead of using a random table, students could use a real dataset based, for instance, in the room temperature and its variation across the day. In this work we present a framework which uses a simple interface allowing it to be used by different courses where the computers are the teaching/learning process in order to give a more realistic feeling to students by using real data. A framework is proposed based on a set of low cost sensors for different physical magnitudes, e.g. temperature, light, wind speed, which are connected to a central server, that the students have access with an Ethernet protocol or are connected directly to the student computer/laptop. These sensors use the communication ports available such as: serial ports, parallel ports, Ethernet or Universal Serial Bus (USB). Since a central server is used, the students are encouraged to use sensor values results in their different courses and consequently in different types of software such as: numerical analysis tools, spreadsheets or simply inside any programming language when a dataset is needed. In order to do this, small pieces of hardware were developed containing at least one sensor using different types of computer communication. As long as the sensors are attached in a server connected to the internet, these tools can also be shared between different schools. This allows sensors that aren't available in a determined school to be used by getting the values from other places that are sharing them. Another remark is that students in the more advanced years and (theoretically) more know how, can use the courses that have some affinities with electronic development to build new sensor pieces and expand the framework further. The final solution provided is very interesting, low cost, simple to develop, allowing flexibility of resources by using the same materials in several courses bringing real world data into the students computer works.

Eastwards / westwards: which direction for gender studies in the 21st century?

Eastwards / Westwards: Which Direction for Gender Studies in the XXIst Century? is a collection of essays which focus on themes and methods that characterize current research into gender in Asian countries in general. In this collection, ideas derived from Gender Studies elsewhere in the world have been subjected to scrutiny for their utility in helping to describe and understand regional phenomena. But the concepts of Local and Global – with their discoursive productions – have not functioned as a binary opposition: localism and globalism are mutually constitutive and researchers have interrogated those spaces of interaction between the ‘self’ and the ‘other’, bearing in mind their own embeddedness in social and cultural structures and their own historical memory. Contributors to this collection provided a critical transnational perspective on some of the complex effects of the dynamics of cultural globalization, by exploring the relation between gender and development, language, historiography, education and culture. We have also given attention to the ideological and rhetorical processes through which gender identity is constructed, by comparing textual grids and patterns of expectation. Likewise, we have discussed the role of ethnography, anthropology, historiography, sociology, fiction, popular culture and colonial and post-colonial sources in (re)inventing old/new male/female identities, their conversion into concepts and circulation through time and space. This multicultural and trans-disciplinary selection of essays is totally written in English, fully edited and revised, therefore, it has a good potential for an immediate international circulation. This project may trace new paths and issues for discussion on what concerns the life, practices and narratives by and about women in Asia, as well as elsewhere in the present day global experience. Academic readership: Researchers, scholars, educators, graduate and post-graduate students, doctoral students and general non-fiction readers, with a special interest in Gender Studies, Asia, Colonial and Post-Colonial Literature, Anthropology, Cultural Studies, History, Historiography, Politics, Race, Feminism, Language, Linguistics, Power, Political and Feminist Agendas, Popular Culture, Education, Women’s Writing, Religion, Multiculturalism, Globalisation, Migration. Chapter summary: 1. “Social Gender Stereotypes and their Implication in Hindi”, Anjali Pande, Jawaharlal Nehru University, New Delhi, India. This essay looks at the subtle ways in which gender identities are constructed and reinforced in India through social norms of language use. Language itself becomes a medium for perpetuating gender stereotypes, forcing its speakers to confirm to socially defined gender roles. Using examples from a classroom discussion about a film, this essay will highlight the underlying rigid male-female stereotypes in Indian society with their more obvious expressions in language. For the urban woman in India globalisation meant increased economic equality and exposure to changed lifestyles. On an individual level it also meant redefining gender relations and changing the hierarchy in man-­woman relationships. With the economic independence there is a heightened sense of liberation in all spheres of social life, a confidence to fuzz the rigid boundaries of gender roles. With the new films and media celebrating this liberated woman, who is ready to assert her sexual needs, who is ready to explode those long held notions of morality, one would expect that the changes are not just superficial. But as it soon became obvious in the course of a classroom discussion about relationships and stereotypes related to age, the surface changes can not become part of the common vocabulary, for the obvious reason that there is still a vast gap between the screen image of this new woman and the ground reality. Social considerations define the limits of this assertiveness of women, whereas men are happy to be liberal within the larger frame of social sanctions. The educated urban woman in India speaks in favour of change and the educated urban male supports her, but one just needs to scratch the surface to see the time tested formulae of gender roles firmly in place. The way the urban woman happily balances this emerging promise of independence with her gendered social identity, makes it necessary to rethink some aspects of looking at gender in a gradually changing, traditional society like India. 2. “The Linguistic Dimension of Gender Equality”, Alissa Tolstokorova, Kiev Centre for Gender Information and Education, Ukraine. The subject-matter of this essay is gender justice in language which, as I argue, may be achieved through the development of a gender-related approach to linguistic human rights. The last decades of the 20th century, globally marked by a “gender shift” in attitudes to language policy, gave impetus to the social movement for promoting linguistic gender equality. It was initiated in Western Europe and nowadays is moving eastwards, as ideas of gender democracy progress into developing countries. But, while in western societies gender discrimination through language, or linguistic sexism, was an issue of concern for over three decades, in developing countries efforts to promote gender justice in language are only in their infancy. My argument is that to promote gender justice in language internationally it is necessary to acknowledge the rights of women and men to equal representation of their gender in language and speech and, therefore, raise a question of linguistic rights of the sexes. My understanding is that the adoption of the Universal Declaration of Linguistic Rights in 1996 provided this opportunity to address the problem of gender justice in language as a human rights issue, specifically as a gender dimension of linguistic human rights. 3. “The Rebirth of an Old Language: Issues of Gender Equality in Kazakhstan”, Maria Helena Guimarães, Polytechnic Institute of Porto, Portugal. The existing language situation in Kazakhstan, while peaceful, is not without some tension. We propose to analyze here some questions we consider relevant in the frame of cultural globalization and gender equality, such as: free from Russian imperialism, could Kazakhstan become an easy prey of Turkey’s “imperialist dream”? Could these traditionally Muslim people be soon facing the end of religious tolerance and gender equality, becoming this new old language an easy instrument for the infiltration in the country of fundamentalism (it has already crossed the boarders of Uzbekistan), leading to a gradual deterioration of its rich multicultural relations? The present structure of the language is still very fragile: there are three main dialects and many academics defend the re-introduction of the Latin alphabet, thus enlarging the possibility of cultural “contamination” by making the transmission of fundamentalist ideas still easier through neighbour countries like Azerbaijan, Uzbekistan and Turkmenistan (their languages belong to the same sub-group of Common Turkic), where the Latin alphabet is already in use, and where the ground for such ideas shown itself very fruitful. 4. “Construction of Womanhood in the Bengali Language of Bangladesh”, Raasheed Mahmood; University of New South Wales, Sydney. The present essay attempts to explore the role of gender-based language differences and of certain markers that reveal the status accorded to women in Bangladesh. Discrimination against women, in its various forms, is endemic in communities and countries around the world, cutting across class, race, age, and religious and national boundaries. One cannot understand the problems of gender discrimination solely by referring to the relationship of power or authority between men and women. Rather one needs to consider the problem by relating it to the specific social formation in which the image of masculinity and femininity is constructed and reconstructed. Following such line of reasoning this essay will examine the nature of gender bias in the Bengali language of Bangladesh, holding the conviction that as a product of social reality language reflects the socio-cultural behaviour of the community who speaks it. This essay will also attempt to shed some light on the processes through which gender based language differences produce actual consequences for women, who become exposed to low self-esteem, depression and systematic exclusion from public discourse. 5. “Marriage in China as an expression of a changing society”, Elisabetta Rosado David, University of Porto, Portugal, and Università Ca’Foscari, Venezia, Italy. In 29 April 2001, the new Marriage Law was promulgated in China. The first law on marriage was proclaimed in 1950 with the objective of freeing women from the feudal matrimonial system. With the second law, in 1981, values and conditions that had been distorted by the Cultural Revolution were recovered. Twenty years later, a new reform was started, intending to update marriage in the view of the social and cultural changes that occurred with Deng Xiaoping’s “open policy”. But the legal reform is only the starting point for this case-study. The rituals that are followed in the wedding ceremony are often hard to understand and very difficult to standardize, especially because China is a vast country, densely populated and characterized by several ethnic minorities. Two key words emerge from this issue: syncretism and continuity. On this basis, we can understand tradition in a better way, and analyse whether or not marriage, as every social manifestation, has evolved in harmony with Chinese culture. 6. “The Other Woman in the Portuguese Colonial Empire: The Case of Portuguese India”, Maria de Deus Manso, University of Évora, Portugal. This essay researches the social, cultural and symbolic history of local women in the Portuguese Indian colonial enclaves. The normative Portuguese overseas history has not paid any attention to the “indigenous” female populations in colonial Portuguese territories, albeit the large social importance of these social segments largely used in matrimonial and even catholic missionary strategies. The first attempt to open fresh windows in the history of this new field was the publication of Charles Boxer’s referential study about Women in lberian Overseas Expansion, edited in Portugal only after the Revolution of 1975. After this research we can only quote some other fragmentary efforts. In fact, research about the social, cultural, religious, political and symbolic situation of women in the Portuguese colonial territories, from the XVI to the XX century, is still a minor historiographic field. In this essay we discuss this problem and we study colonial representations of women in the Portuguese Indian enclaves, mainly in the territory of Goa, using case studies methodologies. 7. “Heading East this Time: Critical Readings on Gender in Southeast Asia”, Clara Sarmento, Polytechnic Institute of Porto, Portugal. This essay intends to discuss some critical readings of fictional and theoretical texts on gender condition in Southeast Asian countries. Nowadays, many texts about women in Southeast Asia apply concepts of power in unusual areas. Traditional forms of gender hegemony have been replaced by other powerful, if somewhat more covert, forms. We will discuss some universal values concerning conventional female roles as well as the strategies used to recognize women in political fields traditionally characterized by male dominance. Female empowerment will mean different things at different times in history, as a result of culture, local geography and individual circumstances. Empowerment needs to be perceived as an individual attitude, but it also has to be facilitated at the macro­level by society and the State. Gender is very much at the heart of all these dynamics, strongly related to specificities of historical, cultural, ethnic and class situatedness, requiring an interdisciplinary transnational approach.

Ant colony search algorithm for the optimal power flow problem

To maintain a power system within operation limits, a level ahead planning it is necessary to apply competitive techniques to solve the optimal power flow (OPF). OPF is a non-linear and a large combinatorial problem. The Ant Colony Search (ACS) optimization algorithm is inspired by the organized natural movement of real ants and has been successfully applied to different large combinatorial optimization problems. This paper presents an implementation of Ant Colony optimization to solve the OPF in an economic dispatch context. The proposed methodology has been developed to be used for maintenance and repairing planning with 48 to 24 hours antecipation. The main advantage of this method is its low execution time that allows the use of OPF when a large set of scenarios has to be analyzed. The paper includes a case study using the IEEE 30 bus network. The results are compared with other well-known methodologies presented in the literature.

Dynamic power- and failure-aware cloud resources allocation for Sets of independent tasks

Cloud computing is increasingly being adopted in different scenarios, like social networking, business applications, scientific experiments, etc. Relying in virtualization technology, the construction of these computing environments targets improvements in the infrastructure, such as power-efficiency and fulfillment of users’ SLA specifications. The methodology usually applied is packing all the virtual machines on the proper physical servers. However, failure occurrences in these networked computing systems can induce substantial negative impact on system performance, deviating the system from ours initial objectives. In this work, we propose adapted algorithms to dynamically map virtual machines to physical hosts, in order to improve cloud infrastructure power-efficiency, with low impact on users’ required performance. Our decision making algorithms leverage proactive fault-tolerance techniques to deal with systems failures, allied with virtual machine technology to share nodes resources in an accurately and controlled manner. The results indicate that our algorithms perform better targeting power-efficiency and SLA fulfillment, in face of cloud infrastructure failures.