75 resultados para Digital distribution
Resumo:
This paper present a methodology to choose the distribution networks reconfiguration that presents the lower power losses. The proposed methodology is based on statistical failure and repair data of the distribution power system components and uses fuzzy-probabilistic modeling for system component outage parameters. The proposed hybrid method using fuzzy sets and Monte Carlo simulation based on the fuzzyprobabilistic models allows catching both randomness and fuzziness of component outage parameters. A logic programming algorithm is applied, once obtained the system states by Monte Carlo Simulation, to get all possible reconfigurations for each system state. To evaluate the line flows and bus voltages and to identify if there is any overloading, and/or voltage violation an AC load flow has been applied to select the feasible reconfiguration with lower power losses. To illustrate the application of the proposed methodology, the paper includes a case study that considers a 115 buses distribution network.
Resumo:
Important research effort has been devoted to the topic of optimal planning of distribution systems. The non linear nature of the system, the need to consider a large number of scenarios and the increasing necessity to deal with uncertainties make optimal planning in distribution systems a difficult task. Heuristic techniques approaches have been proposed to deal with these issues, overcoming some of the inherent difficulties of classic methodologies. This paper considers several methodologies used to address planning problems of electrical power distribution networks, namely mixedinteger linear programming (MILP), ant colony algorithms (AC), genetic algorithms (GA), tabu search (TS), branch exchange (BE), simulated annealing (SA) and the Bender´s decomposition deterministic non-linear optimization technique (BD). Adequacy of theses techniques to deal with uncertainties is discussed. The behaviour of each optimization technique is compared from the point of view of the obtained solution and of the methodology performance. The paper presents results of the application of these optimization techniques to a real case of a 10-kV electrical distribution system with 201 nodes that feeds an urban area.
Resumo:
This paper presents a new and efficient methodology for distribution network reconfiguration integrated with optimal power flow (OPF) based on a Benders decomposition approach. The objective minimizes power losses, balancing load among feeders and subject to constraints: capacity limit of branches, minimum and maximum power limits of substations or distributed generators, minimum deviation of bus voltages and radial optimal operation of networks. The Generalized Benders decomposition algorithm is applied to solve the problem. The formulation can be embedded under two stages; the first one is the Master problem and is formulated as a mixed integer non-linear programming problem. This stage determines the radial topology of the distribution network. The second stage is the Slave problem and is formulated as a non-linear programming problem. This stage is used to determine the feasibility of the Master problem solution by means of an OPF and provides information to formulate the linear Benders cuts that connect both problems. The model is programmed in GAMS. The effectiveness of the proposal is demonstrated through two examples extracted from the literature.
Resumo:
Energy Resources Management can play a very relevant role in future power systems in SmartGrid context, with high penetration of distributed generation and storage systems. This paper deals with the importance of resources management in incident situation. The system to consider a high penetration of distributed generation, demand response, storage units and network reconfiguration. A case study evidences the advantages of using a flexible SCADA to control the energy resources in incident situation.
Resumo:
Introdução: O uso das TIC, nomeadamente dos ambientes virtuais de aprendizagem, são uma possibilidade pedagógica promissora e atractiva pois permitem a construção de conhecimento e a interacção entre alunos, professores e tutores. Na perspectiva do estudante, compreende-se que, em contextos virtuais de aprendizagem a tendência é a de se valorizar cada vez mais a sua participação no processo de ensino e de aprendizagem. No entanto, para que seja possível a implementação de educação a distância é necessário que os estudantes, para além da motivação e da responsabilidade acrescida, possuam um conjunto de competências específicas para participar, efectivamente, num contexto virtual de aprendizagem. Nesse contexto, e para verificar se o uso das tecnologias no processo educacional é exequível, é necessário conhecer as competências digitais dos alunos da Licenciatura em Farmácia da Escola Superior de Tecnologia da Saúde do Porto. Métodos: O estudo é descritivo-transversal e permitiu a recolha de dados através do inquérito por questionário, previamente validado. A amostra em estudo foi retirada da população formada pelos 230 estudantes da Licenciatura de Farmácia, por um processo de amostragem não probabilística por conveniência, perfazendo um total de 52 indivíduos que frequentam o 2º ano. Apresentação de Resultados e Discussão: Os resultados permitiram concluir que os estudantes utilizam as TIC de forma variada mas normalmente em actividades de lazer. Em relação ao conhecimento e utilização das ferramentas da Web 2.0 concluí-se que, na generalidade, os estudantes não conhecem e não dominam a maioria das ferramentas da Web 2.0.Ou seja, os estudantes, mesmo com as suas habilidades e conhecimentos sobre tecnologia, principalmente em relação ao uso de computadores e da Internet, e conhecendo a importância destes recursos como simplificadores nos estudos, continuam a apresentar limitações, provavelmente devido a falta de informação ou a informações duvidosas provenientes de uma utilização incorrecta dos recursos. Estes resultados representam também um desafio, uma vez que caberá à Escola capacitar os estudantes na utilização de novas tecnologias, uma vez que, estas capacidades são cada vez mais solicitadas no mercado de trabalho, e serão primordiais para o sucesso do estudante numa formação a distância mediada por computador.
Resumo:
Collaborative Work plays an important role in today’s organizations, especially in areas where decisions must be made. However, any decision that involves a collective or group of decision makers is, by itself complex, but is becoming recurrent in recent years. In this work we present the VirtualECare project, an intelligent multi-agent system able to monitor, interact and serve its customers, which are, normally, in need of care services. In last year’s there has been a substantially increase on the number of people needed of intensive care, especially among the elderly, a phenomenon that is related to population ageing. However, this is becoming not exclusive of the elderly, as diseases like obesity, diabetes and blood pressure have been increasing among young adults. This is a new reality that needs to be dealt by the health sector, particularly by the public one. Given this scenarios, the importance of finding new and cost effective ways for health care delivery are of particular importance, especially when we believe they should not to be removed from their natural “habitat”. Following this line of thinking, the VirtualECare project will be presented, like similar ones that preceded it. Recently we have also assisted to a growing interest in combining the advances in information society - computing, telecommunications and presentation – in order to create Group Decision Support Systems (GDSS). Indeed, the new economy, along with increased competition in today’s complex business environments, takes the companies to seek complementarities in order to increase competitiveness and reduce risks. Under these scenarios, planning takes a major role in a company life. However, effective planning depends on the generation and analysis of ideas (innovative or not) and, as a result, the idea generation and management processes are crucial. Our objective is to apply the above presented GDSS to a new area. We believe that the use of GDSS in the healthcare arena will allow professionals to achieve better results in the analysis of one’s Electronically Clinical Profile (ECP). This achievement is vital, regarding the explosion of knowledge and skills, together with the need to use limited resources and get better results.
Resumo:
Mestrado em Engenharia Electrotécnica e de Computadores
Resumo:
O movimento de afirmação eXtensible Business Reporting Language (XBRL), como padrão para a preparação e difusão dos relatórios financeiros e outras publicações empresariais, foi encabeçado pelo American lnstitute of Certified Public Accountants (AICPA) em conjunto com aproximadatnente outras 30 organizações. Desde o primeiro encontro internacional sobre a especificação XBRL, realizado em Nova York no mês de Outubro de 1999, que a lista de participantes se tem alargado incluindo proeminentes instituições financeiras, organizações profissionais de serviços, organizações profissionais de contabilidade e fornecedores de tecnologia sobrevindo, ao mesmo tempo, um incontável número de alianças e ligações. A XBRL é uma linguagem standard utilizada no ambiente da Internet cujo desenvolvimento permitirá obter uma informação de melhor qualidade, mais rápida, mais económica e mais eficaz, para o processo de criação e publicação de relatórios financeiros e empresariais. Neste artigo os autores apresentam, resumidamente, as vantagens referidas pela literatura para esta nova tecnologia, descrevem sumariamente as características técnicas da XBRL, traçam o seu percurso desde 1999 e analisam o potencial deste standard para Portugal, bem como a sua aplicação em diferentes áreas de investigação.
Resumo:
For some years now, translation theorist and educator Anthony Pym has been trying to establish a dialogue between the academic tradition he comes from and the world of the language industries into which he is meant to introduce his students: in other words, between the Translation Studies discipline and the localisation sector. This rapprochement is also the stated aim of his new book The Moving Text (p. 159). Rather than collect and synthesise what was previously dispersed over several articles, Pym has rewritten his material completely, both literally and conceptually, all in the light of the more than three decades of research he has conducted into the field of cross--cultural communication. The theoretical arguments are ably supported by a few short but telling and well-exploited examples.
Resumo:
A sociedade contemporânea tem acompanhado a evolução da Internet, ligando cada vez mais pessoas que exigem mais dela a cada dia que passa e desencadeando uma proliferação tecnológica nunca antes observada. A utilização de recursos, como vídeo e áudio na Internet, tem ganho nos últimos anos um crescente interesse. No entanto, constata-se a carência ou falta de recursos educativos digitais na área do áudio, que sejam capazes de apresentar uma pedagogia eficiente face a um tema muito complexo e extenso, para todos aqueles que queiram aprender de forma mais aprofundada o áudio como componente de engenharia. Na internet, sites de vídeos como Youtube ensinam a usar software de edição de áudio como Audacity, conceitos sobre som e áudio. Contudo, todos estão espalhados, sendo que a maior parte deles não possui fundamentos científicos ou uma bibliografia que acompanhe os conteúdos que leccionam. A proposta desta investigação é pesquisar sobre conhecimentos e recursos de áudio, integrando-os num produto Learning Object, Investigar noções teóricas sobre o som, equipamentos e técnicas usadas na área, assim como obter melhores resultados num espaço para a gravação que o aluno poderia fazer, aglomerando esses conceitos num protótipo mediamente desenvolvido. Foi necessária uma investigação extensa nesta área e avaliar e investigar a possibilidade de um recurso educativo, como o DALCH, capaz de proporcionar uma aprendizagem efectiva dos conceitos relacionados com áudio, que é um conceito complexo. Uma vez realizada essa investigação, foi necessário desenvolver, testar e avaliar um produto Learning Object, que apresentasse o áudio na sua globalidade, desde conceitos básicos até conceitos inerentes à própria produção. Foi possível aferir que esta solução pode contribuir para a formação desses alunos mediante uma experiência de aprendizagem agradável e intuitiva.
Resumo:
Traffic emissions and tobacco smoke are considered two main sources of polycyclic aromatic hydrocarbons (PAHs) in indoor and outdoor air. In this study, the impact of these sources on the level of fine particulate matter (PM2.5) and on the distribution of 15 PAHs regarded as priority pollutants by the US-EPA on PM2.5 were evaluated and compared. Outdoor and indoor PM2.5 samples were collected during winter 2008 in Oporto city in Portugal, for sampling periods of 12 and 24 hours, respectively. The outdoor PM2.5 were sampled at one site directly influenced by traffic emissions and the indoor PM2.5 samples were collected at one home directly influenced by tobacco smoke and another one without smoke. A methodology based on microwave-assisted extraction and liquid chromatography with fluorescence detection was applied for the efficient PAHs determination in indoor and outdoor PM2.5. PAHs in indoor PM2.5 concentrations were significantly influenced by the presence of traffic and tobacco smoking emissions. The mean of ΣPAHs in the outdoor traffic PM2.5 was not significantly different from the value attained in the indoor without smoking site. The tobacco smoke increased significantly PAHs concentrations on average about 1000 times more, when compared with the outdoor profile samples suggesting that tobacco smoking may be the most important source of indoor PAHs pollution.
Resumo:
Zero valent iron (ZVI) has been extensively used as a reactive medium for the reduction of Cr(VI) to Cr(III) in reactive permeable barriers. The kinetic rate depends strongly on the superficial oxidation of the iron particles used and the preliminary washing of ZVI increases the rate. The reaction has been primarily modelled using a pseudo-first-order kinetics which is inappropriate for a heterogeneous reaction. We assumed a shrinking particle type model where the kinetic rate is proportional to the available iron surface area, to the initial volume of solution and to the chromium concentration raised to a power ˛ which is the order of the chemical reaction occurring at surface. We assumed α= 2/3 based on the likeness to the shrinking particle models with spherical symmetry. Kinetics studies were performed in order to evaluate the suitability of this approach. The influence of the following parameters was experimentally studied: initial available surface area, chromium concentration, temperature and pH. The assumed order for the reaction was confirmed. In addition, the rate constant was calculated from data obtained in different operating conditions. Digital pictures of iron balls were periodically taken and the image treatment allowed for establishing the time evolution of their size distribution.
Resumo:
Future distribution systems will have to deal with an intensive penetration of distributed energy resources ensuring reliable and secure operation according to the smart grid paradigm. SCADA (Supervisory Control and Data Acquisition) is an essential infrastructure for this evolution. This paper proposes a new conceptual design of an intelligent SCADA with a decentralized, flexible, and intelligent approach, adaptive to the context (context awareness). This SCADA model is used to support the energy resource management undertaken by a distribution network operator (DNO). Resource management considers all the involved costs, power flows, and electricity prices, allowing the use of network reconfiguration and load curtailment. Locational Marginal Prices (LMP) are evaluated and used in specific situations to apply Demand Response (DR) programs on a global or a local basis. The paper includes a case study using a 114 bus distribution network and load demand based on real data.
Resumo:
This study compared the ground reaction forces (GRF) and plantar pressures between unloaded and occasional loaded gait. The GRF and plantar pressures of 60 participants were recorded during unloaded gait and occasional loaded gait (wearing a backpack that raised their body mass index to 30); this load criterion was adopted because is considered potentially harmful in permanent loaded gait (obese people). The results indicate an overall increase (absolute values) of GRF and plantar pressures during occasional loaded gait (p < 0.05); also, higher normalized (by total weight) values in the medial midfoot and toes, and lower values in the lateral rearfoot region were observed. During loaded gait the magnitude of the vertical GRF (impact and thrust maximum) decreased and the shear forces increased more than did the proportion of the load (normalized values). These data suggest a different pattern of GRF and plantar pressure distribution during occasional loaded compared to unloaded gait.
Resumo:
Dissertação de Mestrado Apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação de Professor Doutor Freitas Santos