Cu2ZnSnS4 solar cells prepared with sulphurized dc-sputtered stacked metallic precursors

In the present work we report the details of the preparation and characterization results of Cu2ZnSnS4 (CZTS) based solar cells. The CZTS absorber was obtained by sulphurization of dc magnetron sputtered Zn/Sn/Cu precursor layers. The morphology, composition and structure of the absorber layer were studied by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and Raman scattering. The majority carrier type was identified via a hot point probe analysis. The hole density, space charge region width and band gap energy were estimated from the external quantum efficiency measurements. A MoS2 layer that formed during the sulphurization process was also identified and analyzed in this work. The solar cells had the following structure: soda lime glass/Mo/CZTS/CdS/i-ZnO/ZnO:Al/Al grid. The best solar cell showed an opencircuit voltage of 345 mV, a short-circuit current density of 4.42 mA/cm2, a fill factor of 44.29% and an efficiency of 0.68% under illumination in simulated standard test conditions: AM 1.5 and 100 mW/cm2.

Phenotypic impact of deregulated expression of class I histone deacetylases in urothelial cell carcinoma of the bladder

Deregulated expression of histone deacetylases (HDACs) has been implicated in tumorigenesis. Herein, we investigated class I HDACs expression in bladder urothelial cell carcinoma (BUCC), its prognostic value and biological significance. Significantly increased transcript levels of all HDACs were found in BUCC compared to 20 normal mucosas, and these were higher in lower grade and stage tumors. Increased HDAC3 levels were associated with improved patient survival. SiRNA experiments showed decrease cell viability and motility, and increased apoptosis. We concluded that class I HDACs play an important role in bladder carcinogenesis through deregulation of proliferation, migration and apoptosis, constituting putative therapeutic targets

i-GAME: an implicit GTS allocation mechanism in IEEE 802.15.4 for time-sensitive wireless sensor networks

The IEEE 802.15.4 Medium Access Control (MAC) protocol is an enabling technology for time sensitive wireless sensor networks thanks to its Guaranteed-Time Slot (GTS) mechanism in the beacon-enabled mode. However, the protocol only supports explicit GTS allocation, i.e. a node allocates a number of time slots in each superframe for exclusive use. The limitation of this explicit GTS allocation is that GTS resources may quickly disappear, since a maximum of seven GTSs can be allocated in each superframe, preventing other nodes to benefit from guaranteed service. Moreover, the GTSs may be only partially used, resulting in wasted bandwidth. To overcome these limitations, this paper proposes i-GAME, an implicit GTS Allocation Mechanism in beacon-enabled IEEE 802.15.4 networks. The allocation is based on implicit GTS allocation requests, taking into account the traffic specifications and the delay requirements of the flows. The i-GAME approach enables the use of a GTS by multiple nodes, while all their (delay, bandwidth) requirements are still satisfied. For that purpose, we propose an admission control algorithm that enables to decide whether to accept a new GTS allocation request or not, based not only on the remaining time slots, but also on the traffic specifications of the flows, their delay requirements and the available bandwidth resources. We show that our proposal improves the bandwidth utilization compared to the explicit allocation used in the IEEE 802.15.4 protocol standard. We also present some practical considerations for the implementation of i-GAME, ensuring backward compatibility with the IEEE 801.5.4 standard with only minor add-ons.

Implementation of the i-GAME mechanism in IEEE 802.15.4 WPANs

This technical report describes the implementation details of the Implicit GTS Allocation Mechanism (i-GAME), for the IEEE 802.15.4 protocol. The i-GAME was implemented in nesC/TinyOS for the CrossBow MICAz mote, over our own implementation of the IEEE 802.15.4 protocol stack. This document provides the implementation details, including a description of the i-GAME software interfaces.

A straightforward method to obtain the cohesive laws of bonded joints under mode I loading

A simple procedure to measure the cohesive laws of bonded joints under mode I loading using the double cantilever beam test is proposed. The method only requires recording the applied load–displacement data and measuring the crack opening displacement at its tip in the course of the experimental test. The strain energy release rate is obtained by a procedure involving the Timoshenko beam theory, the specimen’s compliance and the crack equivalent concept. Following the proposed approach the influence of the fracture process zone is taken into account which is fundamental for an accurate estimation of the failure process details. The cohesive law is obtained by differentiation of the strain energy release rate as a function of the crack opening displacement. The model was validated numerically considering three representative cohesive laws. Numerical simulations using finite element analysis including cohesive zone modeling were performed. The good agreement between the inputted and resulting laws for all the cases considered validates the model. An experimental confirmation was also performed by comparing the numerical and experimental load–displacement curves. The numerical load–displacement curves were obtained by adjusting typical cohesive laws to the ones measured experimentally following the proposed approach and using finite element analysis including cohesive zone modeling. Once again, good agreement was obtained in the comparisons thus demonstrating the good performance of the proposed methodology.

And I say to myself: “What a fractional world!”

This paper discusses several complex systems in the perspective of fractional dynamics. For prototype systems are considered the cases of deoxyribonucleic acid decoding, financial evolution, earthquakes events, global warming trend, and musical rhythms. The application of the Fourier transform and of the power law trendlines leads to an assertive representation of the dynamics and to a simple comparison of their characteristics. Moreover, the gallery of different systems, both natural and man made, demonstrates the richness of phenomena that can be described and studied with the tools of fractional calculus.

Microstructure, mechanical properties and chemical degradation of brazed AISI 316 stainless steel/alumina systems

The main aims of the present study are simultaneously to relate the brazing parameters with: (i) the correspondent interfacial microstructure, (ii) the resultant mechanical properties and (iii) the electrochemical degradation behaviour of AISI 316 stainless steel/alumina brazed joints. Filler metals on such as Ag–26.5Cu–3Ti and Ag–34.5Cu–1.5Ti were used to produce the joints. Three different brazing temperatures (850, 900 and 950 °C), keeping a constant holding time of 20 min, were tested. The objective was to understand the influence of the brazing temperature on the final microstructure and properties of the joints. The mechanical properties of the metal/ceramic (M/C) joints were assessed from bond strength tests carried out using a shear solicitation loading scheme. The fracture surfaces were studied both morphologically and structurally using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction analysis (XRD). The degradation behaviour of the M/C joints was assessed by means of electrochemical techniques. It was found that using a Ag–26.5Cu–3Ti brazing alloy and a brazing temperature of 850 °C, produces the best results in terms of bond strength, 234 ± 18 MPa. The mechanical properties obtained could be explained on the basis of the different compounds identified on the fracture surfaces by XRD. On the other hand, the use of the Ag–34.5Cu–1.5Ti brazing alloy and a brazing temperature of 850 °C produces the best results in terms of corrosion rates (lower corrosion current density), 0.76 ± 0.21 μA cm−2. Nevertheless, the joints produced at 850 °C using a Ag–26.5Cu–3Ti brazing alloy present the best compromise between mechanical properties and degradation behaviour, 234 ± 18 MPa and 1.26 ± 0.58 μA cm−2, respectively. The role of Ti diffusion is fundamental in terms of the final value achieved for the M/C bond strength. On the contrary, the Ag and Cu distribution along the brazed interface seem to play the most relevant role in the metal/ceramic joints electrochemical performance.

Remote experimentation: integrating research, education, and industrial application

This paper presents a low-cost scaled model of a silo for drying and airing cereal grains. It allows the control and monitor of several parameters associated to the silo's operation, through a remote accessible infrastructure. The scaled model consists of a 2.50 m wide × 2.10 m long plant with all control and monitor capacities provided by micro-Web servers. An application running on the micro-Web servers enables storing all parameters in a data basis for later analysis. The implemented model aims to support a remote experimentation facility for technological education, research-oriented tutorials, and industrial applications. Given the low-cost requirement, this remote facility can be easily replicated in other institutions to support a network of remote labs, which encompasses the concurrent access of several users (e.g. students).

Alternative chelating agents: Evaluation of the ready biodegradability and complexation properties

The ready biodegradability of four chelating agents, N,N -(S,S)-bis[1-carboxy-2-(imidazol-4-yl)ethyl]ethylenediamine (BCIEE), N - ethylenedi-L-cysteine (EC), N,N -bis (4-imidazolymethyl)ethylenediamine (EMI) and 2,6-pyridine dicarboxylic acid (PDA), was tested according to the OECD guideline for testing of chemicals. PDA proved to be a readily biodegradable substance. However, none of the other three compounds were degraded during the 28 days of the test. Chemical simulations were performed for the four compounds in order to understand their ability to complex with some metal ions (Ca, Cd, Co, Cu, Fe, Mg, Mn, Ni, Pb, Zn) and discuss possible applications of these chelating agents. Two different conditions were simulated: (i) in the presence of the chelating agent and one metal ion, and (ii) in the simultaneous presence of the chelating agent and all metal ions with an excess of Ca. For those compounds that were revealed not to be readily biodegradable (BCIEE, EC and EMI), applications were evaluated where this property was not fundamental or even not required. Chemical simulations pointed out that possible applications for these chelating agents are: food fortification, food process, fertilizers, biocides, soil remediation and treatment of metal poisoning. Additionally, chemical simulations also predicted that PDA is an efficient chelating agent for Ca incrustations removal, detergents and for pulp metal ions removal process.

Shall I compare thee to an old man? A velhice em William Shakespeare e Rugénio de Andrade

A velhice é um tema que emerge com frequência nas obras de William Shakespeare e de Eugénio de Andrade, sempre num tom disfórico. Em ambos, a última das sete idades do ser humano, acarreta uma série de consequências negativas: a) A beleza é efémera e os amantes abandonam; b) O declínio físico e mental é inevitável; c) Na fase final da vida, sobrevém o temor da morte. Para expressarem o efeito da senectude, Shakespeare e Eugénio recorrem a comparações semelhantes entre o ser humano e o Outono (velhice) e o Inverno (morte). Neste artigo, numa perspectiva comparada e intertextual, exemplifico e analiso essas melancólicas e dolorosas imagens. Para tanto, recorro à obra dos dois escritores, à opinião de ensaístas reputados na área dos estudos literários e da psicologia da morte e, naturalmente, à minha opinião.

Influence of Soil Chemistry and Plant Physiology in the Phytoremediation of Cu, Mn, and Zn

Different anthropogenic sources of metals can result from agricultural, industrial, military, mining and urban activities that contribute to environmental pollution. Plants can be grown for phytoremediation to remove or stabilize contaminants in water and soil. Copper (Cu), manganese (Mn) and zinc (Zn) are trace essential metals for plants, although their role in homeostasis in plants must be strictly regulated to avoid toxicity. In this review, we summarize the processes involved in the bioavailability, uptake, transport and storage of Cu, Mn and Zn in plants. The efficiency of phytoremediation depends on several factors including metal bioavailability and plant uptake, translocation and tolerance mechanisms. Soil parameters, such as clay fraction, organic matter content, oxidation state, pH, redox potential, aeration, and the presence of specific organisms, play fundamental roles in the uptake of trace essential metals. Key processes in the metal homeostasis network in plants have been identified. Membrane transporters involved in the acquisition, transport and storage of trace essential metals are reviewed. Recent advances in understanding the biochemical and molecular mechanisms of Cu, Mn and Zn hyperaccumulation are described. The use of plant-bacteria associations, plant-fungi associations and genetic engineering has opened a new range of opportunities to improve the efficiency of phytoremediation. The main directions for future research are proposed from the investigation of published results.

Análise do polimorfismo HLA/DR-DQ em Angolanos portadores de Diabetes Mellitus tipo I

A diabetes mellitus do tipo 1 (DM1) é o distúrbio endócrino-metabólico mais frequente em crianças. É uma doença autoimune resultado da destruição selectiva das células beta pancreáticas. A velocidade de destruição das células beta pode ser rápida em algumas pessoas e lenta em outras; esta última é típica de adulto é conhecido como diabetes autoimune latente em adulto (LADA). A sua etiologia envolve factores ambientais e genéticos, dos genes envolvidos a maior contribuição vem da região do genoma onde estão localizados os genes do Complexo Principal de Histocompatibilidade (MHC). A combinação de diferentes alelos do sistema de antigénio leucocitário humano tipo II (HLAII) esta associada a susceptibilidade da doença e as principais molécula envolvidas são a DQ e DR. O estágio pré-clínico da doença se caracteriza pela presença de auto-anticorpos, sendo o anti-GAD o mais sensível nesta patologia. OBJECTIVO: Analizar a frequência dos polimorfismos HLA-DR/DQ em angolanos portadores de diabetes tipo 1, residentes em Luanda. O tipo de estudo adotado foi casocontrolo num universo de voluntários provenientes da consulta externa de hospitais e clínicas locais no período de outubro de 2012 a outubro 2013. A amostra biológica utilizada foi sangue total, tendo sido processada no laboratório LABGENE, da Faculdade de Medicina (FM) da Universidade Agostinho Neto (UNA). Os auto-anticorpos, anti-GAD, foram doseados pelo método de ELISA. O ADN genómico foi extraído à partir de sangue total periférico e tipagem genética foi realizada mediante PCR-SSP.O alelo DQB1*02 (DQ2/DQ2) (p=0,033, OR= 4, IC (1,2-13,3) foi associado a susceptibilidade da DM1; os alelos DQB1*06 (DQ6/DQ6) (p=0,000, OR=0,30, IC (0,17-0,54); *11 (p=0,011, OR=0,14, IC=0,032-0,62); *13 (p=0,006, OR=0,13, IC=0,049-0,588) e *15 (p=0,001, OR=0,044, IC=0,005-0,39) foram associados a proteção. Foi encontrado 29,2% de positividade para o anti-GAD, não houve associação significativa (p=0,69) entre a resposta positiva do anti-GAD e a idade. Não foi encontrada associação significativa (p=0,39) entre o tempo de diagnóstico e resposta humoral. Observou-se associação significativa entre os alelos de risco DQB1*02 (p=0.000) e resposta positiva para anti-GAD; da mesma maneira houve uma associação significativa para os alelos DQB1*06 (p=0,002), DRB1*11 (p=0,048); *13 (p=0,004) e *15 (p=0,021) e a resposta negativa do anti-GAD.Os dados demostram o forte envolvimentos do gene HLA-II (DQ) com a suceptibilidade a DM1 e sugere que a autoimunidade se desenvolve na presença de susceptibilidade genética, quer dizer, em associação com alelos HLA-II específicos.

Alternativas ao sistema de transporte tradicional em explorações a céu aberto. Caso de estudo: pedreira de Fornelo

A presente tese tem como principal objectivo, o estudo das soluções existentes para a realização da operação de carga e transporte neste sector, e perceber de que forma essas soluções podem ser aplicadas para maximizar a eficiência do processo e minorar os custos de produção a ele associados. Existindo várias soluções disponíveis no mercado, foi necessário adequar as vantagens e desvantagens de cada uma dessas soluções a este caso de estudo em concreto, podendo-se destacar que todos os objectivos desta tese foram:  Estudar os diferentes equipamentos existentes actualmente, concebidos para a realização da operação de carga e transporte em minas e pedreiras;  Analisar a evolução desses equipamentos e procurar soluções e tendências do mercado na indústria extractiva;  Selecção das áreas de estudo na própria pedreira e análise topográfica da mesma;  Análise do Plano de Lavra actual, com o objectivo de perceber o desenvolvimento futuro da exploração;  Estudar diferentes casos de estudo com diferentes soluções aplicadas nesta indústria, e análise dos resultados obtidos;  Estudo da possibilidade e da adequabilidade de um sistema do tipo móvel a este caso da Pedreira de Fornelo;  Comparar o sistema actualmente utilizado com o sistema proposto, distinguindo vantagens e desvantagens de cada um no que diz respeito à viabilidade e economia do processo.