A qualitative description of soil parameters variation due to a prescribed fire in Portuguese northwestern forests using Fuzzy Boolean Nets — The case study of Cabreira mountain

In this paper we study the modifications that occurred in some forest soil properties after a prescribed fire. The research focused on the alterations of soil pH, soil moisture and soil organic matter content during a two-year span, from 2008 to 2009. The study site is located in Anjos, Vieira do Minho municipality, a forest site that has suffered from recurrent wildfires for several decades. Furze (Ulex, sp.), broom (Cytisus, sp.), gorse (Chamaespartum tridentatum) and a very few disperse adult pine (Pinus sylvestris) are the predominant vegetation type in the study area. The average height of this shrub vegetation is around 1.5 m. The prescribed fire was conducted by the National Forestry Authority (AFN) in November 2008. Fuzzy Boolean Nets (FBN) were used to evaluate the alteration in soil parameters when compared with adjacent spots where: i) no fire occurrence was registered since 1998; ii) fire occurrence was registered in 2008; and iii) vegetation pruning by mechanical cut was done in Spring six months prior to the prescribed fire event. Results suggest that in the particular case of the studied site, Anjos, the observed soil properties alterations cannot be related with the prescribed fire.

Measurements of environmental background radiation in the surrounding area of a coal-fired power plant

Certain materials used and produced in a wide range of non-nuclear industries contain enhanced activity concentrations of natural radionuclides. In particular, electricity production from coal is one of the major sources of increased exposure to man from enhanced naturally occurring materials. Over the past decades there has been some discussion about the elevated natural background radiation in the area near coal-fired power plants due to high uranium and thorium content present in coal. This work describes the methodology developed to assess the radiological impact due to natural radiation background increasing levels, potentially originated by a coal-fired power plant’s operation. Gamma radiation measurements have been done with two different instruments: a scintillometer (SPP2 NF, Saphymo) and a gamma ray spectrometer with energy discrimination (Falcon 5000, Canberra). A total of 40 relevant sampling points were established at locations within 20 km from the power plant: 15 urban and 25 suburban measured stations. The highest values were measured at the sampling points near to the power plant and those located in the area within the 6 and 20 km from the stacks. This may be explained by the presence of a huge coal pile (1.3 million tons) located near the stacks contributing to the dispersion of unburned coal and, on the other hand, the height of the stacks (225 m) which may influence ash’s dispersion up to a distance of 20 km. In situ gamma radiation measurements with energy discrimination identified natural emitting nuclides as well as their decay products (212Pb, 214Pb, 226Ra 232Th, 228Ac, 234Th 234Pa, 235U, etc.). This work has been primarily done to in order to assess the impact of a coal-fired power plant operation on the background radiation level in the surrounding area. According to the results, an increase or at least an influence has been identified both qualitatively and quantitatively.

Impact of the Meteorology Conditions on the Particulate Matter Dispersion from an Industrial Complex into Urban and Suburban Areas

The aim of this work was to assess the influence of meteorological conditions on the dispersion of particulate matter from an industrial zone into urban and suburban areas. The particulate matter concentration was related to the most important meteorological variables such as wind direction, velocity and frequency. A coal-fired power plant was considered to be the main emission source with two stacks of 225 m height. A middle point between the two stacks was taken as the centre of two concentric circles with 6 and 20 km radius delimiting the sampling area. About 40 sampling collectors were placed within this area. Meteorological data was obtained from a portable meteorological station placed at approximately 1.7 km to SE from the stacks. Additional data was obtained from the electrical company that runs the coal power plant. These data covers the years from 2006 to the present. A detailed statistical analysis was performed to identify the most frequent meteorological conditions concerning mainly wind speed and direction. This analysis revealed that the most frequent wind blows from Northwest and North and the strongest winds blow from Northwest. Particulate matter deposition was obtained in two sampling campaigns carried out in summer and in spring. For the first campaign the monthly average flux deposition was 1.90 g/m2 and for the second campaign this value was 0.79 g/m2. Wind dispersion occurred predominantly from North to South, away from the nearest residential area, located at about 6 km to Northwest from the stacks. Nevertheless, the higher deposition fluxes occurred in the NW/N and NE/E quadrants. This study was conducted considering only the contribution of particulate matter from coal combustion, however, others sources may be present as well, such as road traffic. Additional chemical analyses and microanalysis are needed to identify the source linkage to flux deposition levels.

Age-period-cohort effects in the incidence of hip fractures: political and economic events are coincident with changes in risk

Introduction: Healthcare improvements have allowed prevention but have also increased life expectancy, resulting in more people being at risk. Our aim was to analyse the separate effects of age, period and cohort on incidence rates by sex in Portugal, 2000–2008. Methods: From the National Hospital Discharge Register, we selected admissions (aged ≥49 years) with hip fractures (ICD9-CM, codes 820.x) caused by low/moderate trauma (falls from standing height or less), readmissions and bone cancer cases. We calculated person-years at risk using population data from Statistics Portugal. To identify period and cohort effects for all ages, we used an age–period–cohort model (1-year intervals) followed by generalised additive models with a negative binomial distribution of the observed incidence rates of hip fractures. Results: There were 77,083 hospital admissions (77.4 % women). Incidence rates increased exponentially with age for both sexes (age effect). Incidence rates fell after 2004 for women and were random for men (period effect). There was a general cohort effect similar in both sexes; risk of hip fracture altered from an increasing trend for those born before 1930 to a decreasing trend following that year. Risk alterations (not statistically significant) coincident with major political and economic change in the history of Portugal were observed around birth cohorts 1920 (stable–increasing), 1940 (decreasing–increasing) and 1950 (increasing–decreasing only among women). Conclusions: Hip fracture risk was higher for those born during major economically/politically unstable periods. Although bone quality reflects lifetime exposure, conditions at birth may determine future risk for hip fractures.

Projeto de torres metálicas de suporte de cabos de energia elétrica - Aplicação da parte 3-1 Eurocódigo 3

Mestrado em Engenharia Civil – Ramo Estruturas

Dimensionamento de soluções de vigas pré-esforçadas por pós-tensão, pré-fabricadas in situ para tabuleiros de pontes e viadutos

Mestrado em Engenharia Civil – Ramo Estruturas

Vitamin D Intake and Cardiometabolic: Risk Factors in Adolescents

Background: A growing body of research suggests that vitamin D might play an important role in overall health. No data exist on vitamin D intake for the Azorean adolescent population. The purpose of this study was to assess vitamin D intake and investigate a possible association between vitamin D intake and cardiometabolic risk factors in Azorean adolescents. Methods: A cross-sectional school-based study was conducted on 496 adolescents (288 girls) aged 15–18 years from the Azorean Islands, Portugal. Anthropometric measurements (waist circumference and height), blood pressure (systolic), and plasma biomarkers [fasting glucose, insulin, total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), and triglycerides (TGs)] were measured to assess metabolic risk. Homeostasis model assessment (HOMA), TC-to-HDL-C ratio, and waist-to-height ratio were calculated. For each of these variables, a Z-score was computed by age and sex. A metabolic risk score was constructed by summing the Zscores of all individual risk factors. High risk was considered when the individual had ‡ 1 standard deviation(SD) of this score. Vitamin D intake was assessed with a semiquantitative food frequency questionnaire. Participants were classified into quartiles of vitamin D intake. Logistic regression was used to determine odds ratios for high cardiometabolic risk scores after adjusting for total energy intake, pubertal stage, fat mass percentage, and cardiorespiratory fitness. Results: Mean (SD) vitamin D intake was 5.8 (6.5) mg/day, and 9.1% of Azorean adolescents achieved the estimated average requirement of vitamin D (10 mg/day or 400 IU). Logistic regression showed that the odds ratio for a high cardiometabolic risk score was 3.35 [95% confidence interval (CI) 1.28–8.75] for adolescents in the lowest vitamin D intake quartile in comparison with those in the highest vitamin D intake quartile, even after adjustment for confounders. Conclusion: A lower level of vitamin D intake was associated with worse metabolic profile among Azorean adolescents.

Milk intake is inversely related to body mass index and body fat in girls

Dairy foods comprise a range of products with varying nutritional content. The intake of dairy products (DPs) has been shown to have beneficial effects on body weight and body fat. This study aimed to examine the independent association between DP intake, body mass index (BMI), and percentage body fat (%BF) in adolescents. A cross-sectional, school-based study was conducted with 1,001 adolescents (418 boys), ages 15–18 years, from the Azorean Archipelago, Portugal. Anthropometric measurements were recorded (weight and height), and %BF was assessed using bioelectric impedance analysis. Adolescent food intake was measured using a self-administered, semiquantitative food frequency questionnaire. Data were analyzed separately for girls and boys, and separate multiple linear regression analysis was used to estimate the association between total DP, milk, yogurt, and cheese intake, BMI, and %BF, adjusting for potential confounders. For boys and girls, respectively, total DP consumption was 2.6 ± 1.9 and 2.9 ± 2.5 servings/day (P = 0.004), while milk consumption was 1.7 ± 1.4 and 2.0 ± 1.7 servings/day (P = 0.001), yogurt consumption was 0.5 ± 0.6 and 0.4 ± 0.7 servings/day (P = 0.247), and cheese consumption was 0.4 ± 0.6 and 0.5 ± 0.8 servings/day (P = 0.081). After adjusting for age, birth weight, energy intake, protein, total fat, sugar, dietary fiber, total calcium intake, low-energy reporters, parental education, pubertal stage, and physical activity, only milk intake was negatively associated with BMI and %BF in girls (respectively, girls: β = −0.167, P = 0.013; boys: β = −0.019, P = 0.824 and girls: β = −0.143, P = 0.030; boys: β = −0.051, P = 0.548). Conclusion: We found an inverse association between milk intake and both BMI and %BF only in girls.

Association between dairy product intake and abdominal obesity in Azorean adolescents

BACKGROUND: Some studies have reported an inverse association between dairy product (DP) consumption and weight or fat mass loss. OBJECTIVES: The objective of our study was to assess the association between DP intake and abdominal obesity (AO) among Azorean adolescents. SUBJECTS/METHODS: This study was a cross-sectional analysis. A total of 903 adolescents (370 boys) aged 15--16 years was evaluated. Anthropometric measurements were collected (weight, height and waist circumference (WC)) and McCarthy’s cut-points were used to categorize WC. AO was defined when WC was X90th percentile. Adolescent food intake was assessed using a self-administered semiquantitative food frequency questionnaire and DP intake was categorized in o2 and X2 servings/day. Data were analyzed separately for girls and boys, and logistical regression was used to estimate the association between DPs and AO adjusting for potential confounders. RESULTS: The prevalence of AO was 54.9% (boys: 32.1% and girls: 70.7%, Po0.001). For boys and girls, DP consumption was 2.3±1.9 and 2.1±1.6 servings/day (P¼0.185), respectively. In both genders, the proportion of adolescents with WC o90th percentile was higher among individuals who reported a dairy intake of X2 servings/day compared with those with an intake o2 servings/day (boys: 71% vs 65% and girls: 36% vs 24%, Po0.05). After adjustments for confounders, two or more DP servings per day were a negative predictor of AO (odds ratio, 0.217; 95% confidence interval, 0.075 -- 0.633) only in boys. CONCLUSION: We found a protective association between DP intake and AO only in boys.

Gait Analysis of Natural and Artificial Walking Systems

This paper studies periodic gaits of multi-legged locomotion systems based on dynamic models. The purpose is to determine the system performance during walking and the best set of locomotion variables. For that objective the prescribed motion of the robot is completely characterized in terms of several locomotion variables such as gait, duty factor, body height, step length, stroke pitch, foot clearance, legs link lengths, foot-hip offset, body and legs mass and cycle time. In this perspective, we formulate three performance measures of the walking robot namely, the mean absolute energy, the mean power dispersion and the mean power lost in the joint actuators per walking distance. A set of model-based experiments reveals the influence of the locomotion variables in the proposed indices.

Energy analysis of Multi-legged Locomotion Systems

4th International Conference on Climbing and Walking Robots - From Biology to Industrial Applications

Performance Issues in Biped Walking Robots

This paper presents the dynamic analysis of robotic biped systems. The main goal is to gain insight into the phenomena of walking and to evaluate its performance. In this study, we propose three methods to quantitatively measure the dynamic efficiency of walking: energy analysis, perturbation analysis and lowpass frequency analysis. In order to accomplish this goal, the prescribed motion of the biped is completely characterised in terms of a set of locomotion variables, namely: step lenght, hip height, hip ripple, hip offset, foot clearance and link lenghts. based on these variables and their influence, the performance measures aer discussed and the results compared with those observed in nature.

Conceção e Execução de Estruturas Metálicas

O presente relatório diz respeito ao trabalho desenvolvido ao longo de seis meses em ambiente de estágio curricular na empresa O FELIZ – Metalomecânica, S.A.. O objetivo principal deste trabalho foi o conhecimento resultante de uma experiência num ambiente industrial no sector das construções metálicas. Pela especificidade do setor, foi desenvolvido um estudo no âmbito da conceção e execução (na componente de fabrico) de estruturas. O relatório que resulta deste trabalho de estágio tem como referência um caso de estudo de uma estrutura metálica. O caso de estudo realizado é referente a um pavilhão industrial standard, e possui dimensões em planta de 60 x 25 metros e cércea total de 9,0 metros, para o qual foi efetuado um breve dimensionamento de toda a estrutura metálica principal. O edifício será constituído por um sistema de pórtico simples formado por perfis laminados a quente normalizados de secção IPE e de aço de classe S275. Posteriormente, e com recurso a software apropriado de detalhamento de estruturas metálicas, foi desenvolvido um modelo 3D de toda a estrutura metálica do edifício. Neste modelo estão presentes todos os elementos constituintes da estrutura, bem como algumas das características físicas e mecânicas de cada peça elementar. Por fim, e com base no modelo anterior foram gerados e editados todos os desenhos 2D para o fabrico da estrutura, incluindo os desenhos de montagem da estrutura.

Acompanhamento do Processo de Compostagem e Identificação de Hipóteses de Melhoria, Tendo em Vista a Valorização do Produto Comercializado

A compostagem tem-se revelado uma boa alternativa na gestão, tratamento e valorização de resíduos sólidos urbanos. Dependendo das matérias-primas usadas no processo, os produtos podem ser considerados fertilizantes/corretivos orgânicos com utilidade agrícola. A Suldouro, Valorização e Tratamento de Resíduos Sólidos Urbanos, S.A., é responsável pela gestão, valorização, recuperação e destino final dos Resíduos Sólidos Urbanos (RSU) produzidos em Vila Nova de Gaia e Santa Maria da Feira. Um dos processos do sistema de gestão é a valorização orgânica, que através da compostagem dos resíduos biodegradáveis origina um corretivo orgânico, denominado comercialmente de Agrovida. O objetivo deste trabalho foi caracterizar o composto produzido na Suldouro através da análise de alguns metais, nomeadamente cobre, zinco e chumbo, pois o seu teor condiciona a classe em que o composto está inserido, e da avaliação da razão C/N, visto ser um parâmetro importante para o desenvolvimento dos microrganismos. Um outro objetivo foi a determinação do tempo ótimo de compostagem, através da avaliação da temperatura máxima, recorrendo ao teste de auto-aquecimento usando vasos de Dewar. O estudo da presença de chumbo não chegou a ser realizado, pois a sua concentração era muito baixa (da ordem dos ppb), ou seja, não era limitativa para a utilização do composto. Quanto à análise de cobre e zinco no composto verificou-se que era necessário fazer alterações no processo, no sentido de reduzir estes valores, tanto a nível da qualidade dos resíduos usados como matéria-prima como a nível da limpeza, essencial depois das operações de manutenção aos pulpers. Em relação à razão C/N esta apresenta valores muito elevados, ou seja, uma quantidade de azoto total muito baixa, indicativa de que seria necessário acrescentar, no início do processo, resíduos mais ricos em azoto. A análise do teste de auto-aquecimento indica que o tempo necessário para a estabilização e maturação das pilhas de compostagem é superior a 3 meses. Assim, sugerem-se melhorias a nível da qualidade do resíduo, tentando incluir resíduos mais facilmente biodegradáveis, uma redução da altura da pilha proporcionando um melhor arejamento ou em alternativa proceder periodicamente ao seu revolvimento como complemento à insuflação de ar. Para concluir, neste trabalho foi realizada uma pesquisa sobre processos de valorização energética, alternativas potenciais à valorização orgânica, tendo sido dado especial relevo a um dos processos, a carbonização hidrotérmica (HTC).

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark