Start-up circuit for low-power indoor light energy harvesting applications

A start-up circuit, used in a micro-power indoor light energy harvesting system, is described. This start-up circuit achieves two goals: first, to produce a reset signal, power-on-reset (POR), for the energy harvesting system, and secondly, to temporarily shunt the output of the photovoltaic (PV) cells, to the output node of the system, which is connected to a capacitor. This capacitor is charged to a suitable value, so that a voltage step-up converter starts operating, thus increasing the output voltage to a larger value than the one provided by the PV cells. A prototype of the circuit was manufactured in a 130 nm CMOS technology, occupying an area of only 0.019 mm(2). Experimental results demonstrate the correct operation of the circuit, being able to correctly start-up the system, even when having an input as low as 390 mV using, in this case, an estimated energy of only 5.3 pJ to produce the start-up.

Certificação duma parte M "completa" (subparte G + F) para aviação geral

O presente trabalho foi realizado no âmbito de um estágio curricular, em parceria com o Instituto de Formação Aeronáutica, tendo como tema a “Certificação de uma Parte M completa (Subparte G + F) para Aviação Geral”. Note-se que quando o autor faz referência à aviação geral, dirige-se às aeronaves não envolvidas no transporte aéreo comercial e cuja massa máxima à descolagem é inferior ou igual a 5700 kg. No entanto no desenrolar da elaboração deste trabalho, o IFA optou pela obtenção da certificação de acordo com a Parte 145, o que permitirá a realização de manutenção no âmbito da aviação comercial e geral, o que torna irrazoável a certificação apenas de acordo com a Parte M Subparte F, já que esta se direcciona única e exclusivamente para a aviação geral. Por conseguinte, o autor optou por desenvolver e abordar apenas a certificação de acordo com a Parte M Subparte G. Com efeito, como principal objectivo pretende-se elaborar um Manual de Gestão da Continuidade da Aeronavegabilidade, por forma a criar as condições necessárias para certificar uma nova empresa, vulgo “start-up”, a ser incubada no IFA, como uma Organização de Gestão da Continuidade da Aeronavegabilidade de acordo com a Parte M Subparte G. O referido manual permitirá demonstrar perante a Autoridade Aeronáutica que a empresa em apreço preenche os requisitos exigidos e definidos na Regulamentação aplicável. Mais se pretende com este trabalho trazer benefícios para a nova empresa a incubar no IFA, designadamente acelerar todo o processo de formação e permitir que a mesma se possa inserir no mercado com a maior brevidade possível. Importa ainda realçar que o trabalho desenvolvido implicou o levantamento e a análise minuciosa de toda a Legislação e Regulamentação relacionada com a Continuidade da Aeronavegabilidade de aeronaves e seus componentes.

A new control strategy with saturation effect compensation for an autonomous induction generator drivenby wide speed range turbines

This paper presents a variable speed autonomous squirrel cage generator excited by a current-controlled voltage source inverter to be used in stand-alone micro-hydro power plants. The paper proposes a system control strategy aiming to properly excite the machine as well as to achieve the load voltage control. A feed-forward control sets the appropriate generator flux by taking into account the actual speed and the desired load voltage. A load voltage control loop is used to adjust the generated active power in order to sustain the load voltage at a reference value. The control system is based on a rotor flux oriented vector control technique which takes into account the machine saturation effect. The proposed control strategy and the adopted system models were validated both by numerical simulation and by experimental results obtained from a laboratory prototype. Results covering the prototype start-up, as well as its steady-state and dynamical behavior are presented. (C) 2011 Elsevier Ltd. All rights reserved.

Planeamento de curto prazo de sistemas de energia solar usando técnicas de otimização robusta

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica

O modo de internacionalização e investimento direto português em economias em desenvolvimento : o caso "Grupo" Jerónimo Martins na Colômbia

Mestrado em Contabilidade e Gestão das Instituições Financeiras

Performance assessment of a wind energy conversion system using a hierarchical controller structure

This paper deals with a hierarchical structure composed by an event-based supervisor in a higher level and two distinct proportional integral (PI) controllers in a lower level. The controllers are applied to a variable speed wind energy conversion system with doubly-fed induction generator, namely, the fuzzy PI control and the fractional-order PI control. The event-based supervisor analyses the operation state of the wind energy conversion system among four possible operational states: park, start-up, generating or brake and sends the operation state to the controllers in the lower level. In start-up state, the controllers only act on electric torque while pitch angle is equal to zero. In generating state, the controllers must act on the pitch angle of the blades in order to maintain the electric power around the nominal value, thus ensuring that the safety conditions required for integration in the electric grid are met. Comparisons between fuzzy PI and fractional-order PI pitch controllers applied to a wind turbine benchmark model are given and simulation results by Matlab/Simulink are shown. From the results regarding the closed loop point of view, fuzzy PI controller allows a smoother response at the expense of larger number of variations of the pitch angle, implying frequent switches between operational states. On the other hand fractional-order PI controller allows an oscillatory response with less control effort, reducing switches between operational states. (C) 2015 Elsevier Ltd. All rights reserved.

Self-scheduling and bidding strategies of thermal units with stochastic emission constraints

This paper is on the self-scheduling problem for a thermal power producer taking part in a pool-based electricity market as a price-taker, having bilateral contracts and emission-constrained. An approach based on stochastic mixed-integer linear programming approach is proposed for solving the self-scheduling problem. Uncertainty regarding electricity price is considered through a set of scenarios computed by simulation and scenario-reduction. Thermal units are modelled by variable costs, start-up costs and technical operating constraints, such as: forbidden operating zones, ramp up/down limits and minimum up/down time limits. A requirement on emission allowances to mitigate carbon footprint is modelled by a stochastic constraint. Supply functions for different emission allowance levels are accessed in order to establish the optimal bidding strategy. A case study is presented to illustrate the usefulness and the proficiency of the proposed approach in supporting biding strategies. (C) 2014 Elsevier Ltd. All rights reserved.