ISELnet: um portal internet para o ISEL

O contínuo desenvolvimento na área da Web 2.0 potencia a implementação de portais Web de carácter multi-funcional com uma elevada versatilidade e uma grande riqueza interactiva. Este projecto pretende tirar partido do desenvolvimento ocorrido nas tecnologias desta área de forma a apresentar uma proposta de portal institucional para o Instituto Superior de Engenharia de Lisboa (ISEL) que espelhe a Instituição como inovadora e actual. Para a implementação desta proposta foi desenvolvida uma plataforma de integração ao nível da camada de apresentação, seguindo os conceitos Web 2.0 aplicáveis, assente em tecnologias cliente suportadas em browser. Com esta plataforma pretende-se disponibilizar os alicerces para a integração das várias aplicações de front-office da Instituição numa camada homogénea, reduzindo a curva de aprendizagem das várias aplicações e contribuindo para uma integração destas que diminua a complexidade de utilização e facilite a manutenção e evolução. Sendo uma plataforma de integração, foi disponibilizada a possibilidade de efectuar as comunicações com base em JSON, XML, cabeçalhos dos pedidos http e Web services SOAP, sendo utilizadas mensagens ACL a nível aplicacional. O que permite um maior desacoplamento tecnológico entre a plataforma e os serviços utilizados. O desenvolvimento do projecto foi assente nos conceitos de desenvolvimento ágil, baseado na prototipagem. A gestão do projecto foi feita com recurso a uma aplicação de gestão de projecto colaborativa, o Redmine, que permitiu a adequação do projecto às necessidades ao longo do desenvolvimento e uma partilha mais fácil do estado do mesmo e de informações críticas do seu desenvolvimento aos vários intervenientes.

Comparison of deposited surface area of airborne ultrafine particles generated from two welding processes

This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.

Determination of airborne nanoparticles from welding operations

The aim of this study is to assess the levels of airborne ultrafine particles emitted in welding processes (tungsten inert gas [TIG], metal active gas [MAG] of carbon steel, and friction stir welding [FSW] of aluminum) in terms of deposited area in pulmonary alveolar tract using a nanoparticle surface area monitor (NSAM) analyzer. The obtained results showed the dependence of process parameters on emitted ultrafine particles and demonstrated the presence of ultrafine particles compared to background levels. Data indicated that the process that resulted in the lowest levels of alveolar deposited surface area (ADSA) was FSW, followed by TIG and MAG. However, all tested processes resulted in significant concentrations of ultrafine particles being deposited in humans lungs of exposed workers.

Characterization of airborne particles generated from metal active gas welding process

This study is focused on the characterization of particles emitted in the metal active gas welding of carbon steel using mixture of Ar + CO2, and intends to analyze which are the main process parameters that influence the emission itself. It was found that the amount of emitted particles (measured by particle number and alveolar deposited surface area) are clearly dependent on the distance to the welding front and also on the main welding parameters, namely the current intensity and heat input in the welding process. The emission of airborne fine particles seems to increase with the current intensity as fume-formation rate does. When comparing the tested gas mixtures, higher emissions are observed for more oxidant mixtures, that is, mixtures with higher CO2 content, which result in higher arc stability. These mixtures originate higher concentrations of fine particles (as measured by number of particles by cm 3 of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more severe worker's exposure.

The effect of metal transfer modes and shielding gas composition on the emission of ultraafine particles in MAG steel welding

The present study aims to characterize ultrafine particles emitted during gas metal arc welding of mild steel and stainless steel, using different shielding gas mixtures, and to evaluate the effect of metal transfer modes, controlled by both processing parameters and shielding gas composition, on the quantity and morphology of the ultrafine particles. It was found that the amount of emitted ultrafine particles (measured by particle number and alveolar deposited surface area) are clearly dependent from the main welding parameters, namely the current intensity and the heat input of the Welding process. The emission of airborne ultrafine particles increases with the current intensity as fume formation rate does. When comparing the shielding gas mixtures, higher emissions were observed for more oxidizing mixtures, that is, with higher CO2 content, which means that these mixtures originate higher concentrations of ultrafine particles (as measured by number of particles. by cubic centimeter of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more hazardous condition regarding welders exposure.

Emission of airborne ultrafine particles during welding of steel plates

The present study is focused on the characterization of ultrafine particles emitted in welding of steel using mixtures of Ar+CO2, and intends to analyze which are the main process parameters which may have influence on the emission itself. It was found that the amount of emitted ultrafine particles (measured by particle number and alveolar deposited surface area) are clearly dependent from the distance to the welding front and also from the main welding parameters, namely the current intensity and heat input in the welding process. The emission of airborne ultrafine particles seem to increase with the current intensity as fume formation rate does. When comparing the tested gas mixtures, higher emissions are observed for more oxidant mixtures, that is, mixtures with higher CO2 content, which result in higher arc stability. The later mixtures originate higher concentrations of ultrafine particles (as measured by number of particles by cm3 of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more hazardous condition regarding worker's exposure. © 2014 Sociedade Portuguesa de Materiais (SPM). Published by Elsevier España, S.L. All rights reserved.

Emissions of nanoparticles during friction stir welding (FSW) of aluminium alloys

Friction stir welding (FSW) is now well established as a welding process capable of joining some different types of metallic materials, as it was (1) found to be a reliable and economical way of producing high quality welds, and (2) considered a "clean" welding process that does not involve fusion of metal, as is the case with other traditional welding processes. The aim of this study was to determine whether the emission of particles during FSW in the nanorange of the most commonly used aluminum (Al) alloys, AA 5083 and AA 6082, originated from the Al alloy itself due to friction of the welding tool against the item that was being welded. Another goal was to measure Al alloys in the alveolar deposited surface area during FSW. Nanoparticles dimensions were predominantly in the 40- and 70-nm range. This study demonstrated that microparticles were also emitted during FSW but due to tool wear. However, the biological relevance and toxic manifestations of these microparticles remain to be determined.

The effect of metal transfer stability (spattering) on fume generation, morphology and composition in short-circuit MAG welding

The main objective of this work was to evaluate the hypothesis that the greater transfer stability leads also to less volume of fumes. Using an Ar + 25%CO2 blend as shielding gas and maintaining constant the average current, wire feed speed and welding speed, bead-on-plate welds were carried out with plain carbon steel solid wire. The welding voltage was scanned to progressively vary the transfer stability. Using two conditions of low stability and one with high stability, fume generation was evaluated by means of the AWS F1.2:2006 standard. The influence of these conditions on fume morphology and composition was also verified. A condition with greater transfer stability does not generate less fume quantity, despite the fact that this condition produces fewer spatters. Other factors such as short-circuit current, arcing time, droplet diameters and arc length are the likely governing factors, but in an interrelated way. Metal transfer stability does not influence either the composition or the size/morphology of fume particulates. (c) 2014 Elsevier B.V. All rights reserved.

Comparison of deposited surface area of airbone ultrafine particles generated from two welding processes

This article describes work performed on the assessment of the levels of airborne ultrafine particles emitted in two welding processes metal-active gas (MAG) of carbon steel and friction-stir welding (FSW) of aluminium in terms of deposited area in alveolar tract of the lung using a nanoparticle surface area monitor analyser. The obtained results showed the dependence from process parameters on emitted ultrafine particles and clearly demonstrated the presence of ultrafine particles, when compared with background levels. The obtained results showed that the process that results on the lower levels of alveolar-deposited surface area is FSW, unlike MAG. Nevertheless, all the tested processes resulted in important doses of ultrafine particles that are to be deposited in the human lung of exposed workers.

Determiation of airborne nanoparticles from welding operations

The aim of this study is to assess the levels of airborne ultrafine particles emitted in welding processes (tungsten inert gas [TIG], metal active gas [MAG] of carbon steel, and friction stir welding [FSW] of aluminum) in terms of deposited area in pulmonary alveolar tract using a nanoparticle surface area monitor (NSAM) analyzer. The obtained results showed the dependence of process parameters on emitted ultrafine particles and demonstrated the presence of ultrafine particles compared to background levels. Data indicated that the process that resulted in the lowest levels of alveolar deposited surface area (ADSA) was FSW, followed by TIG and MAG. However, all tested processes resulted in significant concentrations of ultrafine particles being deposited in humans lungs of exposed workers.

Application of a control banding tool for risk level assessment and control of nanoparticles exposure in welding operations

Scope of study: welding operations result in harmful emissions of nanoparticles; the aim of emissions monitorisation is to evaluate exposure levels and to derive protection measures in order to protect exposed workers; however, the traditional approach of comparing measured concentrations with exposure limits cannot be used; but risk levels can be quantified by using Control Banding Strategies.

Assessment and control of nanoparticles exposure in welding operations by use of a control banding tool

This paper describes the use of a Control Banding Tool to assess and further control of exposure of nanoparticles emitted during welding operations. The tool was applied to Metal Active Gas (MAG) arc welding of mild and stainless steel, providing semi-quantitative data on the process, so that protection measures could be derived, e.g. exhaust gas ventilation by hoods, local ventilation devices and containment measures. This tool is quite useful to compare and evaluate the characteristics of arc welding procedures so that more eco-friendly processes could be preferred over the more potentially noxious ones.

Sistema de recolha e execução de rotas (GPS) e partilha em rede social RecGPS

A popularização dos PDA (Personal Data Assistant ) originou um aumento das suas capacidades e funcionalidades, nomeadamente a inclusão de sistemas de posicionamento global(GPS - Global Positioning System ). Tendo como objectivo o aproveitamento das capacidades deste tipo de dispositivos surge o sistema RecGPS. O RecGPS é um pacote de aplicações para recolha, gestão, análise e partilha de percursos (rotas). A recolha e armazenamento das rotas é efectuada através de uma aplicação instalada no PDA com recurso à funcionalidade GPS do mesmo. A gestão e análise das rotas pode ser efectuada nas aplicações PDA e web, sendo a partilha efectuada através de aplicação web (portal/rede social). A colecção de rotas tanto pode ser armazenada no dispositivo como através da aplicação web. Ao nível do PDA para além da criação de novas rotas é possível executar as rotas existentes, efectuando recolha de dados que permitem a comparação com as execuções anteriores. A rede social permite a partilha de rotas e fomenta a discussão dos utilizadores sobre as mesmas. Para permitir a veri cação das capacidades da aplicação para PDA são efectuados testes. Tendo por base um conjunto de amostras são obtidos resultados através da aplicação e efectuada a sua comparação.

Plataforma de desenvolvimento de aplicações web orientadas a mensagens

O projecto apresentado neste relatório consiste na implementação de uma plataforma de desenvolvimento de aplicações Web orientada a mensagens, capaz de facilitar a construção de páginas Web e de automatizar o acesso a dados com base nos requisitos do problema. O foco da solução é baseado nos requisitos que forem definidos, de modo a desenvolver uma aplicação Web que responda a esses requisitos. A estratégia adoptada visa reduzir o acoplamento e aumentar a coesão dos módulos funcionais. Para reduzir o acoplamento e aumentar a coesão dos módulos funcionais separou-se a apresentação dos dados, permitindo assim que o desenvolvimento e os testes sejam realizados independentemente um do outro. O desenvolvimento é baseado em normas padronizadas (standards) de modo a facilitar a integração com outras tecnologias. Para o desenvolvimento do trabalho foi adoptada uma metodologia ágil. A gestão de projecto foi realizada com recurso a uma plataforma de gestão de projecto, que permitiu registar e organizar todas as informações e tarefas realizadas ao longo do projecto. Após a conclusão da plataforma e como caso de estudo, foi realizada uma aplicação baseada num cenário real de gestão académica (Portal Académico) para aferir os conceitos envolvidos.

Sistema modular de gestão académica

A concretização do Processo de Bolonha a nível das instituições de ensino superior tornou premente a necessidade de processos de gestão académica envolvendo funcionalidades e formatos de dados heterogéneos. Este trabalho tem por objectivo contribuir para abordar esta necessidade no contexto do ISEL, através da implementação de uma plataforma de integração com características modulares ao nível da camada de negócio do portal académico, no sentido de permitir a integração de subsistemas heterogéneos, quer em termos funcionais, quer em termos de formatos de informação. O projecto Sistema Modular de Gestão Académica (SMGA) foi concretizado através de um protótipo de portal académico que assenta numa arquitectura orientada a serviços, onde é utilizado um modelo de comunicação baseado em mensagens no formato Agent Communication Language (ACL). Este protótipo disponibiliza funcionalidades relacionadas com a gestão académica aos seus utilizadores através de uma aplicação Web de Front Office.