On the use of particle swarm optimization to maximize bending stiffness of functionally graded structures

Functionally graded materials are a type of composite materials which are tailored to provide continuously varying properties, according to specific constituent's mixing distributions. These materials are known to provide superior thermal and mechanical performances when compared to the traditional laminated composites, because of this continuous properties variation characteristic, which enables among other advantages, smoother stresses distribution profiles. Therefore the growing trend on the use of these materials brings together the interest and the need for getting optimum configurations concerning to each specific application. In this work it is studied the use of particle swarm optimization technique for the maximization of a functionally graded sandwich beam bending stiffness. For this purpose, a set of case studies is analyzed, in order to enable to understand in a detailed way, how the different optimization parameters tuning can influence the whole process. It is also considered a re-initialization strategy, which is not a common approach in particle swarm optimization as far as it was possible to conclude from the published research works. As it will be shown, this strategy can provide good results and also present some advantages in some conditions. This work was developed and programmed on symbolic computation platform Maple 14. (C) 2013 Elsevier B.V. All rights reserved.

Rheological behaviour of concrete made with fine recycled concrete aggregates - Influence of the superplasticizer

This paper evaluates the influence of two superplasticizers (SP) on the rheological behaviour of concrete made with fine recycled concrete aggregates (FRCA). Three families of concrete were tested: family CO made without SP, family Cl made with a regular superplasticizer and family C2 made with a high-performance superplasticizer. Five replacement ratios of natural sand by FRCA were tested: 0%, 10%, 30%, 50% and 100%. The coarse aggregates were natural gravels. Three criteria were established to design the concrete mixes' composition: keep the same particle size distribution curves, adjust the water/cement ratio to obtain a similar slump and no pre-saturation of the FRCA. All mixes had the same cement and SP content. The results show that the incorporation of FRCA significantly increased the shrinkage and creep deformation. The FRCA's effect was influenced by the curing age. The reference concrete made with natural sand stabilizes the creep deformation faster than the mixes made with FRCA. The incorporation of superplasticizer increased the shrinkage at early ages and decreased the shrinkage at 91 days of age. The regular superplasticizer did not improve the creep deformation while the high-performance superplasticizer highly improved this property. The incorporation of FRCA jeopardized the SP's effectiveness. This study demonstrated that to use FRCA and superplasticizer for concrete production it is necessary to take into account the different rheological behaviour of these mixes. (C) 2015 Elsevier Ltd. All rights reserved.

Occupational exposure to mycotoxins: aspects to consider for the aggregate and cumulative risk assessment

Mycotoxins are an important group of naturally occurring substances known to contaminate a huge variety of agricultural products, feed and food commodities. The main concern is their widespread presence and toxic effects on humans and animals as they have been described as cytotoxic, nephrotoxic, hepatotoxic, teratogenic, immunosuppressive, mutagenic and/or carcinogenic. However, until now, risk assessments and regulations have usually been performed on individual mycotoxins despite humans and animals are being frequently exposed to a multitude of mycotoxins simultaneously. Moreover, even though some exposures through inhalation and dermal contact may potentially occur, only oral ingestion has been considered as the sole route of exposure in all the evaluations. However, more recent studies have also demonstrated airborne exposure to mycotoxins in different occupational settings with emphasis on agricultural professions. In these cases, skin contact with mold-infested substrates and inhalation of spore-borne toxins are the most important sources of exposure. Still, mycotoxins are not normally recongnize as na occupational hazard and exposure is different from the one ocurring by food intake. In this case, exposure is charaterized to be acute and simultaneous to other mycotoxins and also to fungi and dust. All these features increase the challenge implicated in the risk assessment process. Some topics will be presented and discussed in detailed such as: What occupational settings should be consider in this case; possible exposure routes; exposure characterization; how to assess exposure; co-exposure; aggregate exposure and cumulative risk assessment.