Perfil lipídico em estudantes do ensino superior: caracterização numa população de jovens

O perfil lipídico é condicionado por diversos fatores, entre os quais os estilos de vida, a prática de exercício físico e os hábitos alimentares. Com o presente estudo pretende‑se avaliar o perfil lipídico numa população de jovens e estudar a sua associação com o índice de massa corporal, com os estilos de vida e os hábitos alimentares. Com um estudo exploratório descritivo, transversal, foi determinado o perfil lipídico de 97 estudantes, voluntários, do ensino superior, com idades compreendidas entre os 18 e os 25 anos. O perfil lipídico foi determinado pelo doseamento do colesterol total e frações (HDL e LDL) e triglicéridos. Foi identificado o índice de massa corporal e hábitos e estilos de vida, recolhidos pela aplicação de um questionário validado. No presente estudo não se observou alteração significativa do perfil lipídico, do IMC nem com o total do score alimentar. Não se encontraram associações entre as alterações lipídicas e o género, sendo que, nos estudantes com hábitos tabágicos, a fração HDL se encontrava mais baixa. O baixo score alimentar não se encontra associado ao perfil lipídico, o mesmo não se verificando em relação à prática de exercício físico. Verificou‑se um perfil lipídico alterado em 44,4% dos participantes, média de colesterol de 198,04mg/dl, triglicéridos de 82,58mg/dl, que são valores elevados para esta faixa etária. Os resultados deste estudo indicam que esta população deve monitorizar os fatores de risco de modo a prevenir patologia do foro cardio e cerebrovascular. ABSTRACT - The lipid profile is conditioned by several factors including the styles of life, physical exercise and eating habits. The present study is to evaluate the lipid profile in a population of students in higher education, and study their association with body mass index, with the lifestyles and eating habits. A descriptive exploratory study, transversal, we determined the lipid profile of 97 students, volunteers, higher education, aged 18 to 25 years. The lipid profile was determined by assay of total cholesterol and fractions (HDL and LDL) and triglycerides. It identified the body mass index and habits and lifestyles, collected by applying a validated questionnaire. In the present study, no significant change in lipid profile, BMI, nor with the total food score. No associations were found between lipid disorders and gender, and smoking habits in the students with the HDL fraction was lower. The low food score is not associated with lipid profile, the same was not observed in relation to physical exercise. There is an altered lipid profile in 44.4% of participants, average 198.04mg/dl cholesterol, triglycerides 82.58mg/dl, which are high values for this age group. The results of this study indicate that this population is to monitor the risk factors to prevent cardiovascular and cerebrovascular diseases.

Implementação e validação do método de determinação de metais e fósforo por ICP-OES (inductively coupled plasma-optical emission spectometry) em biodiesel

O objectivo do presente trabalho foi desenvolver, implementar e validar métodos de determinação de teor de cálcio (Ca), magnésio (Mg), sódio (Na), potássio (K) e fósforo (P) em biodiesel, por ICP-OES. Este método permitiu efectuar o controlo de qualidade do biodiesel, com a vantagem de proporcionar uma análise multi-elementar, reflectindo-se numa diminuição do tempo de análise. Uma vez que o biodiesel é uma das principais fontes de energia renovável e alternativa ao diesel convencional, este tipo de análises revela-se extremamente útil para a sua caracterização. De acordo com a análise quantitativa e qualitativa e após a validação dos respectivos ensaios, apresentam-se, na Tabela 1 as condições optimizadas para cada elemento em estudo. As condições de trabalho do ICP-OES foram escolhidas tendo em conta as características do elemento em estudo, o tipo de equipamento utilizado para a sua análise, e de modo a obter a melhor razão sinal/intensidade de fundo. Para a validação dos ensaios foram efectuados ensaios de recuperação, determinados limites de detecção e quantificação, ensaios de repetibilidade e reprodutibilidade, e verificação das curvas de calibração. Na tabela 2 apresentam-se os comprimentos de onda escolhidos (livres de interferências) e respectivos limites de detecção e quantificação dos elementos analisados por ICP-OES, na posição radial e radial atenuado.

Biodegradation rate constants in different NF/UF fractions of cork processing wastewaters

Cork processing wastewater is an aqueous complex mixture of organic compounds that have been extracted from cork planks during the boiling process. These compounds, such as polysaccharides and polyphenols, have different biodegradability rates, which depend not only on the natureof the compound but also on the size of the compound. The aim of this study is to determine the biochemical oxygen demands (BOD) and biodegradationrate constants (k) for different cork wastewater fractions with different organic matter characteristics. These wastewater fractions were obtained using membrane separation processes, namely nanofiltration (NF) and ultrafiltration (UF). The nanofiltration and ultrafiltration membranes molecular weight cut-offs (MWCO) ranged from 0.125 to 91 kDa. The results obtained showed that the biodegradation rate constant for the cork processing wastewater was around 0.3 d(-1) and the k values for the permeates varied between 0.27-0.72 d(-1), being the lower values observed for permeates generated by the membranes with higher MWCO and the higher values observed for the permeates generated by the membranes with lower MWCO. These higher k values indicate that the biodegradable organic matter that is permeated by the membranes with tighter MWCO is more readily biodegradated.

Optoelectronic properties of a-Si(1-x)C(x)H films grown in hydrogen diluted silane-methane plasma

This work reports on the optoelectronic properties and device application of hydrogenated amorphous silicon carbide (a-Si(1-x)C(x):H) films grown by plasma-enhanced chemical vapour deposition (PECVD). The films with an optical bandgap ranging from about 1.8 to 2.0 eV were deposited in hydrogen diluted silane-methane plasma by varying the radio frequency power. Several n-i-p structures with an intrinsic a-Si(1-x)C(x):H layer of different optical gaps were also fabricated. The optimized devices exhibited a diode ideality factor of 1.4-1.8, and a leakage current of 190-470 pA/cm(2) at -5 V. The density of deep defect states in a-Si(1-x)C(x):H was estimated from the transient dark current measurements and correlated with the optical bandgap and carbon content. Urbach energies for the valence band tail were also determined by analyzing the spectral response within sub-bandgap energy range. (C) 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

InOx thin films deposited by plasma assisted evaporation: application in light shutters

An integration of undoped InOx and commercial ITO thin films into laboratory assembled light shutter devices is made. Accordingly, undoped transparent conductive InOx thin films, about 100 nm thick, are deposited by radiofrequency plasma enhanced reactive thermal evaporation (rf-PERTE) of indium teardrops with no intentional heating of the glass substrates. The process of deposition occurs at very low deposition rates (0.1-0.3 nm/s) to establish an optimized reaction between the oxygen plasma and the metal vapor. These films show the following main characteristics: transparency of 87% (wavelength, lambda = 632.8 nm) and sheet resistance of 52 Omega/sq; while on commercial ITO films the transparency was of 92% and sheet resistance of 83 Omega/sq. The InOx thin film surface characterized by AFM shows a uniform grain texture with a root mean square surface roughness of Rq similar to 2.276 nm. In contrast, commercial ITO topography is characterized by two regions: one smoother with Rq similar to 0.973 nm and one with big grains (Rq similar to 3.617 nm). For the shutters assembled using commercial ITO, the light transmission coefficient (Tr) reaches the highest value (Tr-max) of 89% and the lowest (Tr-min) of 1.3% [13], while for the InOx shutters these values are 80.1% and 3.2%, respectively. Regarding the electric field required to achieve 90% of the maximum transmission in the ON state (E-on), the one presented by the devices assembled with commercial ITO coated glasses is 2.41 V/mu m while the one presented by the devices assembled with InOx coated glasses is smaller, 1.77 V/mu m. These results corroborate the device quality that depends on the base materials and fabrication process used. (C) 2014 Elsevier Ltd. All rights reserved.