Toxicidade a cianobactérias: impacte potencial na saúde pública em populações de Portugal e Brasil

Como recurso natural fundamental à vida, a água e os ecossistemas aquáticos devem ser alvo de avaliação contínua, no que se reporta à sua qualidade física, química e biológica. Segundo a Organização Mundial de Saúde cerca de 1,1 biliões de pessoas estão impossibilitadas em aceder a qualquer tipo de água potável e, as populações residentes nas proximidades de rios, lagoas, e reservatórios utilizam estas águas para as suas necessidades de consumo, aumentando o risco de transmissão de doenças. Enquanto constituintes da comunidade fitoplanctónica, as cianobactérias são microrganismos procariotas, fotossintéticos, que obtêm os nutrientes diretamente da coluna de água e, um aumento da concentração de nutrientes (principalmente azoto e fósforo), associado a condições ambientais favoráveis, pode desencadear um crescimento rápido originando fluorescências. Sob determinadas condições as cianobactérias podem produzir toxinas existindo registos que evidenciam que fluorescências toxicas são responsáveis pelo envenenamento agudo e morte de animais e humanos pelo que, a água utilizada para consumo humano deverá ser regularmente monitorizada para este elemento biológico. O objetivo deste estudo é relacionar a ocorrência de fluorescências de cianobactérias (> 2000 cel/ml) e toxicidade associada, com o impacte potencial na Saúde Pública avaliado através do consumo direto ou indireto da água. Em Portugal foram selecionados oito reservatórios situados na região Sul, pertencentes às bacias hidrográficas do Sado e Guadiana e estudados entre 2000 e 2008. No Brasil foram selecionados os reservatórios de Três Marias (Estado de Minas Gerais) e de Tucuruí (Estado do Pará) e estudados em 2005 e 2006 respetivamente. Os reservatórios foram caracterizados em termos físicos e químicos, tendo-se igualmente procedido à caracterização da comunidade fitoplanctónica através da identificação e quantificação dos principais grupos presentes em diferentes épocas do ano. Em termos fitoplanctónicos os reservatórios portugueses apresentaram maior diversidade,verificando-se contudo dominância das cianobactérias na comunidade. Associados a fluorescências, foram registados nestes reservatórios géneros produtores de hepato e neurotoxinas como Aphanizomenon sp, Microcystis aeruginosa e Oscillatoria sp. No Brasil, em situação de fluorescências, os géneros produtores de neuro e hepatotoxinas foram Microcystis (> 350.000 cels/ml) e Cylindrospermopsis. A presença destes géneros, poderá constituir um risco potencial para a saúde pública, pelo que é importante a implementação de medidas de mitigação em todos os reservatórios objeto de estudo, devendo essa atuação passar pelo controle do estado trófico no sentido de evitar o desenvolvimento de fluorescências. Assim sugere-se a implementação de um tratamento adequado para a produção de água de consumo e a organização de ações de sensibilização e aviso e informação às populações que utilizam os reservatórios em Portugal e no Brasil para diversos usos. - ABSTRACT - As a life fundamental natural resource, water and aquatic ecosystems must be continuously evaluated in their physical, chemical and biological quality. According World Health Organization, 1.1 billion people has no chance to access any kind of potable water. Populations living near rivers, lagoons or reservoirs use those waters to content their needs, increasing risks disease transmission. As members of phytoplankton community, cyanobacteria are prokaryotic, photosynthetic microorganisms and get its nutrients directly from water column. The increase of this nutrients (especially nitrogen and phosphorus) associated with favorable environment conditions, can support a sudden grow and instigate blooms. Under specific conditions cyanobacteria can produce toxins and several records have shown that toxic blooms are responsible by acute poisoning and death in animals and humans so, water for human consumption must be regularly surveyed for this biologic element. The aim of this study is to correlate Cyanobacteria blooms (>2.000cels/ml) and connected toxicity with public health impact, evaluated through water consumption. In Portugal, eight reservoirs located in the South region were selected and study between 2000 and 2008. In Brazil, Três Marias reservoir (Minas Gerais Provence) and Tucuruí (Pará Provence) were selected and study in 2005 and 2006. Reservoirs were characterized in physical and chemical aspects, as well as phytoplankton community, through identification and counting of main present groups along study period. In bloom circumstances, liver toxins and neurotoxins producers like Aphanizomenon sp, Microcystis aeruginosa and Oscillatoria sp. were founded in Portuguese reservoirs. In Brazil, cyanobacteria genera involved in toxic bloom were Microcystis (> 350.000 cels/ml) and Cylindrospermopsis. This genera presence represents a potential risk for public health, and show the requirement to implement mitigation measures in all study reservoirs. These measures can be represented by water eutrophication control to avoid blooms, by appropriate treatments of water to human consumption, and public warnings or information to dose people in Portugal and Brazil that use these reservoirs to several activities.

Cyanobacteria toxicity: potential public health impact in South Portugal populations

Cyanobacteria are prokaryotic, plantlike organisms present in lakes, recreational waters, and reservoirs, and often dominate phytoplankton communities in warm, nutrient-enriched hard waters. A stable water column rich in certain nutrients, especially nitrogen and phosphorus, is associated with favorable environmental conditions that support development of cyanobacterial population maxima or "blooms." Under specific conditions, cyanobacteria produce toxins that are responsible for acute poisoning and death of animals and humans. The main aim of this study was to correlate the presence of cyanobacteria blooms with potential toxicity to humans as a public health issue. In Portugal, seven reservoirs located in the southern region were selected and studied between 2000 and 2008. Reservoirs were characterized by physical and chemical aspects, and identification of phytoplankton communities. In the case of cyanobacterial blooms, toxins that affected the liver, nervous system, and skin were detected, namely, Microcystis aeruginosa, Aphanizomenon spp., and Oscillatoria. These findings suggest the presence of a potential risk for public health, and indicate the need to implement mitigation measures in all studied reservoirs. These measures may involve (1) water eutrophication control to avoid blooms, (2) appropriate treatment of water for human consumption, and (3) public warnings or information to those individuals that use these reservoirs for several recreational activities.

Physical-chemical and mineralogical characterization of fine aggregates from construction and demolition waste recycling plants

Construction and demolition waste (CDW) represents around 31% of all waste produced in the European Union. It is today acknowledged that the consumption of raw materials in the construction industry is a non-sustainable activity. It is thus necessary to reduce this consumption, and the volume of CDW dumped, by using this waste as a source of raw materials for the production of recycled aggregates. One potential use of these aggregates is their incorporation in reinforced concrete as a replacement of natural aggregates. A concrete that incorporates these aggregates and still performs well requires them to be fully characterized so that their behaviour within the concrete can be predicted. Coarse recycled aggregates have been studied quite thoroughly, because they are simpler to reintroduce in the market as a by-product, and so has the performance of concrete made with them. This paper describes the main results of research designed to characterize the physical and chemical properties of fine recycled aggregates for concrete production and their relationship with mineralogical composition and preprocessing. The constraints of the incorporation of fine aggregates in reinforced concrete are discussed. It is shown that, unless a developed processing diagram is used, this application is not feasible. (C) 2013 Elsevier Ltd. All rights reserved.

Cr2O3 thin films grown at room temperature by low pressure laser chemical vapour deposition

Chromia (Cr2O3) has been extensively explored for the purpose of developing widespread industrial applications, owing to the convergence of a variety of mechanical, physical and chemical properties in one single oxide material. Various methods have been used for large area synthesis of Cr2O3 films. However, for selective area growth and growth on thermally sensitive materials, laser-assisted chemical vapour deposition (LCVD) can be applied advantageously. Here we report on the growth of single layers of pure Cr2O3 onto sapphire substrates at room temperature by low pressure photolytic LCVD, using UV laser radiation and Cr(CO)(6) as chromium precursor. The feasibility of the LCVD technique to access selective area deposition of chromia thin films is demonstrated. Best results were obtained for a laser fluence of 120 mJ cm(-2) and a partial pressure ratio of O-2 to Cr(CO)(6) of 1.0. Samples grown with these experimental parameters are polycrystalline and their microstructure is characterised by a high density of particles whose size follows a lognormal distribution. Deposition rates of 0.1 nm s(-1) and mean particle sizes of 1.85 mu m were measured for these films. (C) 2011 Elsevier B.V. All rights reserved.

Mechanical performance of concrete made with aggregates from construction and demolition waste recycling plants

This research aims at analysing the mechanical performance of concrete with recycled aggregates (RA) from construction and demolition waste (CDW) from various locations in Portugal. First the characteristics of the various aggregates (natural and recycled) used in the production of concrete were thoroughly analysed. The composition of the RA was determined and several physical and chemical tests of the aggregates were performed. In order to evaluate the mechanical performance of concrete, compressive strength (in cubes and cylinders), splitting tensile strength, modulus of elasticity and abrasion resistance tests were performed. Concrete mixes with RA from CDW from several recycling plants were evaluated, in order to understand the influence that the RA's collection point, and consequently their composition, has on the characteristics of the mixes produced. The analysis of the mechanical performance allowed concluding that the use of RA worsens most of the properties tested, especially when fine RA are used. On the other hand, there was an increase in abrasion resistance when coarse RA were used. In global terms, the use of this type of aggregates, in limited contents, is viable from a mechanical viewpoint. (C) 2015 Elsevier Ltd. All rights reserved.