Potential inundation of Lisbon downtown by a 1755-like tsunami

In this study, we present 10 m resolution tsunami flooding maps for Lisbon downtown and the Tagus estuary. To compute these maps we use the present bathymetry and topographic maps and a reasonable estimate for the maximum credible tsunami scenario. Tsunami modeling was made with a non-linear shallow water model using four levels of nested grids. The tsunami flood is discussed in terms of flow depth, run-up height and maximum inundation area. The results show that, even today, in spite of the significant morphologic changes in the city river front after the 1755 earthquake, a similar event would cause tsunami flow depths larger than one meter in a large area along the Tagus estuary and Lisbon downtown. Other areas along the estuary with a high population density would also be strongly affected. The impact of the tide on the extent of tsunami inundation is discussed, due to the large amplitude range of the tide in Lisbon, and compared with the historical descriptions of the 1755 event. The results presented here can be used to identify the potential tsunami inundation areas in Lisbon; this identification comprises a key element of the Portuguese tsunami emergency management system.

Sensor element for a metal-insulator-semiconductor camera system (MISCam)

We discuss the operation of a new type of optical sensor (MISCam) based on a metal-insulator-semiconductor (MIS) structure. The operation principle relies on light-induced changes of the band bending and barrier height at the interface between semiconductor and insulator. An image is obtained from the quenching of the ac signal in analogy to the principle of the laser-scanned photodiode (LSP). Lateral resolution depends on the semiconductor material chosen. We have characterised the MIS structures by C-V, I-V, and spectral response measurements testing different types of insulators like a-Si3N4, SiO2, and AlN. The presence of slow interface charges allows for image memory. Colour sensors can be realised by controlling sign and magnitude of the electric fields in the base and the interface region.

Single side damage simulations and detection in beam-like structures

Beam-like structures are the most common components in real engineering, while single side damage is often encountered. In this study, a numerical analysis of single side damage in a free-free beam is analysed with three different finite element models; namely solid, shell and beam models for demonstrating their performance in simulating real structures. Similar to experiment, damage is introduced into one side of the beam, and natural frequencies are extracted from the simulations and compared with experimental and analytical results. Mode shapes are also analysed with modal assurance criterion. The results from simulations reveal a good performance of the three models in extracting natural frequencies, and solid model performs better than shell while shell model performs better than beam model under intact state. For damaged states, the natural frequencies captured from solid model show more sensitivity to damage severity than shell model and shell model performs similar to the beam model in distinguishing damage. The main contribution of this paper is to perform a comparison between three finite element models and experimental data as well as analytical solutions. The finite element results show a relatively well performance.

Optimal design of piezolaminated structures using B-spline strip finite element models

A package of B-spline finite strip models is developed for the linear analysis of piezolaminated plates and shells. This package is associated to a global optimization technique in order to enhance the performance of these types of structures, subjected to various types of objective functions and/or constraints, with discrete and continuous design variables. The models considered are based on a higher-order displacement field and one can apply them to the static, free vibration and buckling analyses of laminated adaptive structures with arbitrary lay-ups, loading and boundary conditions. Genetic algorithms, with either binary or floating point encoding of design variables, were considered to find optimal locations of piezoelectric actuators as well as to determine the best voltages applied to them in order to obtain a desired structure shape. These models provide an overall economy of computing effort for static and vibration problems.

Impact of a 1755-like tsunami in Huelva, Spain

Coastal areas are highly exposed to natural hazards associated with the sea. In all cases where there is historical evidence for devastating tsunamis, as is the case of the southern coasts of the Iberian Peninsula, there is a need for quantitative hazard tsunami assessment to support spatial planning. Also, local authorities must be able to act towards the population protection in a preemptive way, to inform 'what to do' and 'where to go' and in an alarm, to make people aware of the incoming danger. With this in mind, we investigated the inundation extent, run-up and water depths, of a 1755-like event on the region of Huelva, located on the Spanish southwestern coast, one of the regions that was affected in the past by several high energy events, as proved by historical documents and sedimentological data. Modelling was made with a slightly modified version of the COMCOT (Cornell Multi-grid Coupled Tsunami Model) code. Sensitivity tests were performed for a single source in order to understand the relevance and influence of the source parameters in the inundation extent and the fundamental impact parameters. We show that a 1755-like event will have a dramatic impact in a large area close to Huelva inundating an area between 82 and 92 km(2) and reaching maximum run-up around 5 m. In this sense our results show that small variations on the characteristics of the tsunami source are not too significant for the impact assessment. We show that the maximum flow depth and the maximum run-up increase with the average slip on the source, while the strike of the fault is not a critical factor as Huelva is significantly far away from the potential sources identified up to now. We also show that the maximum flow depth within the inundated area is very dependent on the tidal level, while maximum run-up is less affected, as a consequence of the complex morphology of the area.

Laser scanned photodiodes (LSP) for Image sensing

An optimized ZnO:Al/a-pin SixCl1-x:H/Al configuration for the laser scanned photodiode (LSP) imaging detector is proposed. The LSP utilizes light induced depletion layers as detector and a laser beam for readout. The effect of the sensing element structure, cell configuration and light source flux are investigated and correlated with the sensor output characteristics. Experimental data reveal that the large optical gap and the low conductivity of the doped a-SixC1-x:H layers are responsible by an induced inversion layer at the illuminated interfaces which blocks the carrier collection. These insulator-like layers act as MIS gates preventing image smearing. The physical background of the LSP is discussed.

Finite element studies of the mechanical behaviour of the diaphragm in normal and pathological cases

The diaphragm is a muscular membrane separating the abdominal and thoracic cavities, and its motion is directly linked to respiration. In this study, using data from a 59-year-old female cadaver obtained from the Visible Human Project, the diaphragm is reconstructed and, from the corresponding solid object, a shell finite element mesh is generated and used in several analyses performed with the ABAQUS 6.7 software. These analyses consider the direction of the muscle fibres and the incompressibility of the tissue. The constitutive model for the isotropic strain energy as well as the passive and active strain energy stored in the fibres is adapted from Humphrey's model for cardiac muscles. Furthermore, numerical results for the diaphragmatic floor under pressure and active contraction in normal and pathological cases are presented.

Toxicidade a cianobactérias: impacte potencial na saúde pública em populações de Portugal e Brasil

Como recurso natural fundamental à vida, a água e os ecossistemas aquáticos devem ser alvo de avaliação contínua, no que se reporta à sua qualidade física, química e biológica. Segundo a Organização Mundial de Saúde cerca de 1,1 biliões de pessoas estão impossibilitadas em aceder a qualquer tipo de água potável e, as populações residentes nas proximidades de rios, lagoas, e reservatórios utilizam estas águas para as suas necessidades de consumo, aumentando o risco de transmissão de doenças. Enquanto constituintes da comunidade fitoplanctónica, as cianobactérias são microrganismos procariotas, fotossintéticos, que obtêm os nutrientes diretamente da coluna de água e, um aumento da concentração de nutrientes (principalmente azoto e fósforo), associado a condições ambientais favoráveis, pode desencadear um crescimento rápido originando fluorescências. Sob determinadas condições as cianobactérias podem produzir toxinas existindo registos que evidenciam que fluorescências toxicas são responsáveis pelo envenenamento agudo e morte de animais e humanos pelo que, a água utilizada para consumo humano deverá ser regularmente monitorizada para este elemento biológico. O objetivo deste estudo é relacionar a ocorrência de fluorescências de cianobactérias (> 2000 cel/ml) e toxicidade associada, com o impacte potencial na Saúde Pública avaliado através do consumo direto ou indireto da água. Em Portugal foram selecionados oito reservatórios situados na região Sul, pertencentes às bacias hidrográficas do Sado e Guadiana e estudados entre 2000 e 2008. No Brasil foram selecionados os reservatórios de Três Marias (Estado de Minas Gerais) e de Tucuruí (Estado do Pará) e estudados em 2005 e 2006 respetivamente. Os reservatórios foram caracterizados em termos físicos e químicos, tendo-se igualmente procedido à caracterização da comunidade fitoplanctónica através da identificação e quantificação dos principais grupos presentes em diferentes épocas do ano. Em termos fitoplanctónicos os reservatórios portugueses apresentaram maior diversidade,verificando-se contudo dominância das cianobactérias na comunidade. Associados a fluorescências, foram registados nestes reservatórios géneros produtores de hepato e neurotoxinas como Aphanizomenon sp, Microcystis aeruginosa e Oscillatoria sp. No Brasil, em situação de fluorescências, os géneros produtores de neuro e hepatotoxinas foram Microcystis (> 350.000 cels/ml) e Cylindrospermopsis. A presença destes géneros, poderá constituir um risco potencial para a saúde pública, pelo que é importante a implementação de medidas de mitigação em todos os reservatórios objeto de estudo, devendo essa atuação passar pelo controle do estado trófico no sentido de evitar o desenvolvimento de fluorescências. Assim sugere-se a implementação de um tratamento adequado para a produção de água de consumo e a organização de ações de sensibilização e aviso e informação às populações que utilizam os reservatórios em Portugal e no Brasil para diversos usos. - ABSTRACT - As a life fundamental natural resource, water and aquatic ecosystems must be continuously evaluated in their physical, chemical and biological quality. According World Health Organization, 1.1 billion people has no chance to access any kind of potable water. Populations living near rivers, lagoons or reservoirs use those waters to content their needs, increasing risks disease transmission. As members of phytoplankton community, cyanobacteria are prokaryotic, photosynthetic microorganisms and get its nutrients directly from water column. The increase of this nutrients (especially nitrogen and phosphorus) associated with favorable environment conditions, can support a sudden grow and instigate blooms. Under specific conditions cyanobacteria can produce toxins and several records have shown that toxic blooms are responsible by acute poisoning and death in animals and humans so, water for human consumption must be regularly surveyed for this biologic element. The aim of this study is to correlate Cyanobacteria blooms (>2.000cels/ml) and connected toxicity with public health impact, evaluated through water consumption. In Portugal, eight reservoirs located in the South region were selected and study between 2000 and 2008. In Brazil, Três Marias reservoir (Minas Gerais Provence) and Tucuruí (Pará Provence) were selected and study in 2005 and 2006. Reservoirs were characterized in physical and chemical aspects, as well as phytoplankton community, through identification and counting of main present groups along study period. In bloom circumstances, liver toxins and neurotoxins producers like Aphanizomenon sp, Microcystis aeruginosa and Oscillatoria sp. were founded in Portuguese reservoirs. In Brazil, cyanobacteria genera involved in toxic bloom were Microcystis (> 350.000 cels/ml) and Cylindrospermopsis. This genera presence represents a potential risk for public health, and show the requirement to implement mitigation measures in all study reservoirs. These measures can be represented by water eutrophication control to avoid blooms, by appropriate treatments of water to human consumption, and public warnings or information to dose people in Portugal and Brazil that use these reservoirs to several activities.

Impact of Sahara dust transport on Cape Verde atmospheric element particles

The objectives of this study were to (1) conduct an elemental characterization of airborne particles sampled in Cape Verde and (2) assess the influence of Sahara desert on local suspended particles. Particulate matter (PM10) was collected in Praia city (14°94'N; 23°49'W) with a low-volume sampler in order to characterize its chemical composition by k0-INAA. The filter samples were first weighed and subsequently irradiated at the Portuguese Research Reactor. Results showed that PM10 concentrations in Cape Verde markedly exceeded the health-based air quality standards defined by the European Union (EU), World Health Organization (WHO), and U.S. Environmental Protection Agency (EPA), in part due to the influence of Sahara dust transport. The PM10 composition was characterized essentially by high concentrations of elements originating from the soil (K, Sm, Co, Fe, Sc, Rb, Cr, Ce, and Ba) and sea (Na), and low concentrations of anthropogenic elements (As, Zn, and Sb). In addition, the high concentrations of PM measured in Cape Verde suggest that health of the population may be less affected compared with other sites where PM10 concentrations are lower but more enriched with toxic elements.

Determination of stresses around a cylindrical single pile caused by horizontal movements of soils with the finitive element method

This study was carried out with the aim of modeling in 2D, in plain strain, the movement of a soft cohesive soil around a pile, in order to enable the determination of stresses resulting along the pile, per unit length. The problem in study fits into the large deformations problem and can be due to landslide, be close of depth excavations, to be near of zones where big loads are applied in the soil, etc. In this study is used an constitutive Elasto-Plastic model with the failure criterion of Mohr-Coulomb to model the soil behavior. The analysis is developed considering the soil in undrained conditions. To the modeling is used the finite element program PLAXIS, which use the Updated Lagrangian - Finite Element Method (UL-FEM). In this work, special attention is given to the soil-pile interaction, where is presented with some detail the formulation of the interface elements and some studies for a better understand of his behavior. It is developed a 2-D model that simulates the effect of depth allowing the study of his influence in the stress distribution around the pile. The results obtained give an important base about how behaves the movement of the soil around a pile, about how work the finite element program PLAXIS and how is the stress distribution around the pile. The analysis demonstrate that the soil-structure interaction modeled with the UL-FEM and interface elements is more appropriate to small deformations problems.

Modelling and aerodynamic simulation of a vehicle and failure analysis of a laminated front fender

Master Thesis in Mechanical Engineering field of Maintenance and Production

How foam-like is the shear-induced lamellar phase of an ionic liquid crystal?

Philosophical Magazine Letters Volume 88, Issue 9-10, 2008 Special Issue: Solid and Liquid Foams. In commemoration of Manuel Amaral Fortes

Sistema fiscal português Vs sistema fiscal brasileiro - perspectiva do investidor

Mestrado em Fiscalidade

A especificidade do trabalho de Pontas no Ensino Artístico Especializado

Relatório Final de Estágio apresentado à Escola Superior de Dança com vista à obtenção do Grau de Mestre em Ensino de Dança.

Optimal location of supports in beam structures using genetic algorithms

Real structures can be thought as an assembly of components, as for instances plates, shells and beams. This later type of component is very commonly found in structures like frames which can involve a significant degree of complexity or as a reinforcement element of plates or shells. To obtain the desired mechanical behavior of these components or to improve their operating conditions when rehabilitating structures, one of the eventual parameters to consider for that purpose, when possible, is the location of the supports. In the present work, a beam-type structure is considered, and for a set of cases concerning different number and types of supports, as well as different load cases, the authors optimize the location of the supports in order to obtain minimum values of the maximum transverse deflection. The optimization processes are carried out using genetic algorithms. The results obtained, clearly show a good performance of the approach proposed. © 2014 IEEE.