8 resultados para Languages of convergences
em Repositório Científico do Instituto Politécnico de Lisboa - Portugal
Resumo:
Relatório da Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar
Resumo:
The economic development of a region depends on the speed that people and goods can travel. The reduction of people and goods travel time can be achieved by planning smooth road layouts, which are obtained by crossing natural obstacles such as hills, by tunneling at great depths, and allowing the reduction of the road alignment length. The stress state in rock masses at such depths, either because of the overburden or due to the tectonic conditions of the rock mass induces high convergences of the tunnel walls. These high convergence values are incompatible with the supports structural performance installed in the excavation stabilization. In this article it is intended to evaluate and analyze some of the solutions already implemented in several similar geological and geotechnical situations, in order to establish a methodological principle for the design of the tunnels included in a highway section under construction in the region influenced by the Himalayas, in the state of Himachal Pradesh (India) and referenced by "four laning of Kiratpur to Ner Chowk section".
Resumo:
Of vital importance to the successful implementation of the teaching of FLs in the 1st Cycle...
Resumo:
Introdução: A produção e o uso da literatura científica são analisados, quantificados e interpretados pela bibliometria, ciência utilizada para estudos métricos da informação publicada e que estuda as questões relacionadas com a comunicação científica e a atividade científica. Objetivo: O estudo apresentado é uma análise bibliométrica da produção científica portuguesa da área da saúde indexada na Web of Science. Métodos: Analisa-se a produção referente ao período entre 1992 e final de 2011. A análise da produção científica centrou-se nas seguintes variáveis: categorias de classificação da Web of Science, tipologia de documentos indexados, títulos de revistas, distribuição por anos de publicação, afiliação institucional, idiomas, países de origem dos autores com quem foram estabelecidas relações de parceria científica e quem facultou os financiamentos à investigação científica. Resultados: Foram contabilizados 34.208 trabalhos. Destes, o artigo é a forma mais utilizada pelos autores portugueses para a divulgação dos resultados de investigação (58,5%). A década mais recente é contemplada com 75,4% dos registos. A maioria da produção com visibilidade internacional é oriunda de universidades e de centros de investigação hospitalar; institutos, laboratórios da indústria farmacêutica e universidades estrangeiras têm valores residuais. A colaboração com outros investigadores internacionais destaca-se no caso da Europa (73,2%). O financiamento da investigação científica é suportado basicamente pela Fundação para a Ciência e Tecnologia (59,5%), seguida da Comissão Europeia (17,8%). O inglês é o idioma mais usado para a divulgação dos resultados de investigação nacional na área da saúde (97,8%). Conclusões: O uso de bases de dados ou de plataformas científicas para estudos bibliométricos é um processo moroso e difícil. O total de trabalhos em análise foi sempre o mesmo mas, em algumas variáveis, os valores não coincidem, quer porque alguns dos registos foram classificados em mais do que uma categoria temática, quer pelos trabalhos multidisciplinares oriundos das mesmas instituições, quer pelos trabalhos de colaboração internacional. Também no presente estudo os artigos são o veículo privilegiado para a divulgação dos resultados científicos. Apontamento final: deve encorajar-se a utilização de outras plataformas científicas e de outras bases de dados para uma mais completa recuperação da produção científica nacional na área da saúde. Introduction: The production and the use of the scientific literature are analyzed, quantified and interpreted by bibliometry. Bibliometry is the science used in published information metric studies and studies the questions of scientific communication and the scientific production. Aim of the study: This study presents a bibliometric analysis of the indexed Web of Science Portuguese scientific production in the health field. Methods: We analyzed the production from 1992 to the end of 2011. This analysis focused in several variables: general categories areas of Web of Science, indexed document types, source titles, publication years, group/corporate authors, languages, identification of the countries with scientific partnerships and identification of the funding agencies for scientific research. Results: We found 34.208 works. From this, the article is the most common channel for disseminating the research results (58.5%). The most recent decade has 75.4% of the total of records. Most of the production with international visibility becomes from universities and hospital research centers; institutes, pharmaceutical labs or foreign universities have residual values. Collaborating with other international researchers is very common, particularly with Europe (73.2%). In general, the Fundação para a Ciência e Tecnologia supports the scientific research (59.5%), followed by the European Commission (17.8%). The language commonly used for disseminating the research results in health is the English (97.8%). Conclusions: Using databases or scientific platforms for bibliometric studies is a hard and difficult process. The total of works analyzed was always the same but, with some variables, the numbers does not coincide: a) some of the registries were classified in several categories; b) some of the multidisciplinary works were from the same institution; c) the large number of international partnership. In this study, articles are the privileged way for disseminating the scientific results. A last thought: the use of other scientific platforms and databases should be encouraged for a more complete retrieval of the national research production in health.
Resumo:
Introdução: A produção e o uso da literatura científica são analisados, quantificados e interpretados pela bibliometria, ciência utilizada para estudos métricos da informação publicada e que estuda as questões relacionadas com a comunicação científica e a atividade científica. Objetivo: O estudo apresentado é uma análise bibliométrica da produção científica portuguesa da área da saúde indexada na Web of Science. Métodos: Analisa-se a produção referente ao período entre 1992 e final de 2011. A análise da produção científica centrou-se nas seguintes variáveis: categorias de classificação da Web of Science, tipologia de documentos indexados, títulos de revistas, distribuição por anos de publicação, afiliação institucional, idiomas, países de origem dos autores com quem foram estabelecidas relações de parceria científica e quem facultou os financiamentos à investigação científica. Resultados: Foram contabilizados 34.208 trabalhos. Destes, o artigo é a forma mais utilizada pelos autores portugueses para a divulgação dos resultados de investigação (58,5%). A década mais recente é contemplada com 75,4% dos registos. A maioria da produção com visibilidade internacional é oriunda de universidades e de centros de investigação hospitalar; institutos, laboratórios da indústria farmacêutica e universidades estrangeiras têm valores residuais. A colaboração com outros investigadores internacionais destaca-se no caso da Europa (73,2%). O financiamento da investigação científica é suportado basicamente pela Fundação para a Ciência e Tecnologia (59,5%), seguida da Comissão Europeia (17,8%). O inglês é o idioma mais usado para a divulgação dos resultados de investigação nacional na área da saúde (97,8%). Conclusões: O uso de bases de dados ou de plataformas científicas para estudos bibliométricos é um processo moroso e difícil. O total de trabalhos em análise foi sempre o mesmo mas, em algumas variáveis, os valores não coincidem, quer porque alguns dos registos foram classificados em mais do que uma categoria temática, quer pelos trabalhos multidisciplinares oriundos das mesmas instituições, quer pelos trabalhos de colaboração internacional. Também no presente estudo os artigos são o veículo privilegiado para a divulgação dos resultados científicos. Apontamento final: deve encorajar-se a utilização de outras plataformas científicas e de outras bases de dados para uma mais completa recuperação da produção científica nacional na área da saúde. Introduction: The production and the use of the scientific literature are analyzed, quantified and interpreted by bibliometry. Bibliometry is the science used in published information metric studies and studies the questions of scientific communication and the scientific production. Aim of the study: This study presents a bibliometric analysis of the indexed Web of Science Portuguese scientific production in the health field. Methods: We analyzed the production from 1992 to the end of 2011. This analysis focused in several variables: general categories areas of Web of Science, indexed document types, source titles, publication years, group/corporate authors, languages, identification of the countries with scientific partnerships and identification of the funding agencies for scientific research. Results: We found 34.208 works. From this, the article is the most common channel for disseminating the research results (58.5%). The most recent decade has 75.4% of the total of records. Most of the production with international visibility becomes from universities and hospital research centers; institutes, pharmaceutical labs or foreign universities have residual values. Collaborating with other international researchers is very common, particularly with Europe (73.2%). In general, the Fundação para a Ciência e Tecnologia supports the scientific research (59.5%), followed by the European Commission (17.8%). The language commonly used for disseminating the research results in health is the English (97.8%). Conclusions: Using databases or scientific platforms for bibliometric studies is a hard and difficult process. The total of works analyzed was always the same but, with some variables, the numbers does not coincide: a) some of the registries were classified in several categories; b) some of the multidisciplinary works were from the same institution; c) the large number of international partnership. In this study, articles are the privileged way for disseminating the scientific results. A last thought: the use of other scientific platforms and databases should be encouraged for a more complete retrieval of the national research production in health.
Resumo:
CoDeSys "Controller Development Systems" is a development environment for programming in the area of automation controllers. It is an open source solution completely in line with the international industrial standard IEC 61131-3. All five programming languages for application programming as defined in IEC 61131-3 are available in the development environment. These features give professionals greater flexibility with regard to programming and allow control engineers have the ability to program for many different applications in the languages in which they feel most comfortable. Over 200 manufacturers of devices from different industrial sectors offer intelligent automation devices with a CoDeSys programming interface. In 2006, version 3 was released with new updates and tools. One of the great innovations of the new version of CoDeSys is object oriented programming. Object oriented programming (OOP) offers great advantages to the user for example when wanting to reuse existing parts of the application or when working on one application with several developers. For this reuse can be prepared a source code with several well known parts and this is automatically generated where necessary in a project, users can improve then the time/cost/quality management. Until now in version 2 it was necessary to have hardware interface called “Eni-Server” to have access to the generated XML code. Another of the novelties of the new version is a tool called Export PLCopenXML. This tool makes it possible to export the open XML code without the need of specific hardware. This type of code has own requisites to be able to comply with the standard described above. With XML code and with the knowledge how it works it is possible to do component-oriented development of machines with modular programming in an easy way. Eplan Engineering Center (EEC) is a software tool developed by Mind8 GmbH & Co. KG that allows configuring and generating automation projects. Therefore it uses modules of PLC code. The EEC already has a library to generate code for CoDeSys version 2. For version 3 and the constant innovation of drivers by manufacturers, it is necessary to implement a new library in this software. Therefore it is important to study the XML export to be then able to design any type of machine. The purpose of this master thesis is to study the new version of the CoDeSys XML taking into account all aspects and impact on the existing CoDeSys V2 models and libraries in the company Harro Höfliger Verpackungsmaschinen GmbH. For achieve this goal a small sample named “Traffic light” in CoDeSys version 2 will be done and then, using the tools of the new version it there will be a project with version 3 and also the EEC implementation for the automatically generated code.
Resumo:
Conferência: 39th Annual Conference of the IEEE Industrial-Electronics-Society (IECON), Vienna, Austria, Nov 10-14, 2013
Resumo:
The legacy of nineteenth century social theory followed a “nationalist” model of society, assuming that analysis of social realities depends upon national boundaries, taking the nation-state as the primary unit of analysis, and developing the concept of methodological nationalism. This perspective regarded the nation-state as the natural - and even necessary - form of society in modernity. Thus, the constitution of large cities, at the end of the 19th century, through the intense flows of immigrants coming from diverse political and linguistic communities posed an enormous challenge to all social research. One of the most significant studies responding to this set of issues was The Immigrant Press and its Control, by Robert E. Park, one of the most prominent American sociologists of the first half of the 20th century. The Immigrant Press and its Control was part of a larger project entitled Americanization Studies: The Acculturation of Immigrant Group into American Society, funded by the Carnagie Corporation following World War I, taking as its goal to study the so-called “Americanization methods” during the 1920s. This paper revisits that particular work by Park to reveal how his detailed analysis of the role of the immigrant press overcame the limitations of methodological nationalism. By granting importance to language as a tool uniting each community and by showing how the strength of foreign languages expressed itself through the immigrant press, Park demonstrated that the latter produces a more ambivalent phenomenon than simply the assimilation of immigrants. On the one hand, the immigrant press served as a connecting force, driven by the desire to preserve the mother tongue and culture while at the same time awakening national sentiments that had, until then, remained diffuse. Yet, on the other hand, it facilitated the adjustment of immigrants to the American context. As a result, Park’s work contributes to our understanding of a particular liminal moment inherent within many intercultural contexts, the space between emigrant identity (emphasizing the country of origin) and immigrant identity (emphasizing the newly adopted country). His focus on the role played by media in the socialization of immigrant groups presaged later work on this subject by communication scholars. Focusing attention on Park’s research leads to other studies of the immigrant experience from the same period (e.g., Thomas & Znaniecki, The Polish Peasant in Europe and America), and also to insights on multi-presence and interculturality as significant but often overlooked phenomena in the study of immigrant socialization.