Fungal contamination in two Portuguese wastewater treatment plants

The presence of filamentous fungi was detected in wastewater and air collected at wastewater treatment plants (WWTP) from several European countries. The aim of the present study was to assess fungal contamination in two WWTP operating in Lisbon. In addition, particulate matter (PM) contamination data was analyzed. To apply conventional methods, air samples from the two plants were collected through impaction using an air sampler with a velocity air rate of 140 L/min. Surfaces samples were collected by swabbing the surfaces of the same indoor sites. All collected samples were incubated at 27°C for 5 to 7 d. After lab processing and incubation of collected samples, quantitative and qualitative results were obtained with identification of the isolated fungal species. For molecular methods, air samples of 250 L were also collected using the impinger method at 300 L/min airflow rate. Samples were collected into 10 ml sterile phosphate-buffered saline with 0.05% Triton X-100, and the collection liquid was subsequently used for DNA extraction. Molecular identification of Aspergillus fumigatus and Stachybotrys chartarum was achieved by real-time polymerase chain reaction (RT-PCR) using the Rotor-Gene 6000 qPCR Detection System (Corbett). Assessment of PM was also conducted with portable direct-reading equipment (Lighthouse, model 3016 IAQ). Particles concentration measurement was performed at five different sizes: PM0.5, PM1, PM2.5, PM5, and PM10. Sixteen different fungal species were detected in indoor air in a total of 5400 isolates in both plants. Penicillium sp. was the most frequently isolated fungal genus (58.9%), followed by Aspergillus sp. (21.2%) and Acremonium sp. (8.2%), in the total underground area. In a partially underground plant, Penicillium sp. (39.5%) was also the most frequently isolated, also followed by Aspergillus sp. (38.7%) and Acremonium sp. (9.7%). Using RT-PCR, only A. fumigatus was detected in air samples collected, and only from partial underground plant. Stachybotrys chartarum was not detected in any of the samples analyzed. The distribution of particle sizes showed the same tendency in both plants; however, the partially underground plant presented higher levels of contamination, except for PM2.5. Fungal contamination assessment is crucial to evaluating the potential health risks to exposed workers in these settings. In order to achieve an evaluation of potential health risks to exposed workers, it is essential to combine conventional and molecular methods for fungal detection. Protective measures to minimize worker exposure to fungi need to be adopted since wastewater is the predominant internal fungal source in this setting.

Characterizing the fungal and bacterial microflora and concentrations in fitness centres

Fitness centres are special places where conditions for microbiological proliferation should be considered. Moisture due to human perspiration and water condensation as a result of human physical activities are prevalent in this type of buildings. Exposure to microbial contaminants is clinically associated with respiratory disorders and people who work out in polluted environments would be susceptible to contaminants. This work studied the indoor air contamination in three gymnasiums in Lisbon. The sampling was performed at two periods: at the opening (morning) and closing (night) of the three gymnasiums. The airborne bacterial and fungal populations were sampled by impaction directly onto Tryptic Soy Agar (for bacteria) and Malt Extract Agar (for fungi) plates, using a Merck MAS-100 air sampler. Higher bacterial concentrations were found at night as compared to the morning but the same behaviour was not found for fungal concentrations. Gram-negative catalase positive cocci were the dominant bacteria in indoor air samples of the studied gymnasiums. In this study, 21 genera/species of fungal colonies were identified. Chrysosporium sp., Chrysonilia sp., Neoscytalidium hialinum, Sepedonium sp. and Penicillium sp. were the most prevalent species identified in the morning, while Cladosporium sp., Penicillium sp., Chrysosporium sp., Acremonium sp. and Chrysonilia sp. were more prevalent at night. A well-designed sanitation and maintenance program for gymnasiums is needed to ensure healthier space for indoor physical activity.

Fungal contamination of sandpits from recreational parks and schools: a potential risk for human health

Sandpits used by children are frequently visited by wild life which constitutes a source of fungal pathogens and allergenic fungi. This study aimed to take an unannounced snapshot of the urban levels of fungal contaminants in sands, using for this purpose two public recreational parks, three elementary schools and two kindergartens. All samples were from Lisbon and neighboring municipalities and were tested for fungi of clinical interest. Potentially pathogenic fungi were isolated from all samples besides one. Fusarium dimerum (32.4%) was found to be the dominant species in one park and Chrysonilia spp. in the other (46.6%). Fourteen different species and genera were detected and no dermatophytes were found. Of a total of 14 species and genera, the fungi most isolated from the samples of the elementary schools were Penicillium spp. (74%), Cladophialophora spp. (38%) and Cladosporium spp. (90%). Five dominant species and genera were isolated from the kindergartens. Penicillium spp. was the only genus isolated in one, though with remarkably high counts (32500 colony forming units per gram). In the other kindergarten Penicillium spp. were also the most abundant species, occupying 69% of all the fungi found. All of the samples exceeded the Maximum Recommended Value (MRV) for beach sand defined by Brandão et al. 2011, which are currently the only quantitative guidelines available for the same matrix. The fungi found confirm the potential risk of exposure of children to keratinophilic fungi and demonstrates that regular cleaning or replacing of sand needs to be implemented in order to minimize contamination.

Analysis of surfaces for characterization of fungal burden: does it matter?

Objectives: Mycological contamination of occupational environments can be a result of fungal spores’ dispersion in the air and on surfaces. Therefore, it is very important to assess it in both types of the samples. In the present study we assessed fungal contamination in the air and in the surface samples to show relevance of surfaces sampling in complementing the results obtained in the air samples. Material and Methods: In total, 42 settings were assessed by the analysis of air and surfaces samples. The settings were divided into settings with a high fungal load (7 poultry farms and 7 pig farms, 3 cork industries, 3 waste management plants, 2 wastewater treatment plants and 1 horse stable) and a low fungal load (10 hospital canteens, 8 college canteens and 1 maternity hospital). In addition to culture-based methods, molecular tools were also applied to detect fungal burden in the settings with a higher fungal load. Results: From the 218 sampling sites, 140 (64.2%) presented different species in the examined surfaces when compared with the species identified in the air. A positive association in the high fungal load settings was found between the presence of different species in the air and surfaces. Wastewater treatment plants constituted the setting with the highest number of different species between the air and surface. Conclusions: We observed that surfaces sampling and application of molecular tools showed the same efficacy of species detection in high fungal load settings, corroborating the fact that surface sampling is crucial for a correct and complete analysis of occupational scenarios.

Prevalence of Aspergillus section Fumigati in Portuguese slaughterhouses: a fungal and mycotoxin concern

Introduction - Within the Aspergillus genus, Aspergillus fumigatus species is one of the most ubiquitous saprophytic fungi and is considered the species with higher clinical relevance. The fungi belonging to the Fumigati section are the most common cause of invasive aspergillosis and a major source of infection related mortality in immunocompromised patients. One of the most abundant metabolites produced by Aspergillus fumigatus is the metabolite gliotoxin, which exhibits a diverse array of biologic effects on the immune system. Further, environments contaminated with A. fumigatus may be the cause or enhance respiratory problems in the workers of those specific settings. These species produce specific allergens and mycotoxins that could cause respiratory disorders. Aim of the study - The aim of the present work was to determine the prevalence of Aspergillus section Fumigati by cultural and molecular methods in poultry; swine and bovine; and large animal (bovine and horses) slaughterhouses.

Fungal contamination in coffee samples: a public health concern

Introduction - Fungi are natural coffee contaminants and under certain environmental conditions have the potential to produce toxins. Many studies revealed that the important toxigenic fungal genera (Aspergillus and Penicillium) are natural coffee contaminants, and are present from the field to storage. Aspergilli from the Circumdati and Nigri sections are known to produce high levels of ochratoxin A, a mycotoxin known as nephrotoxic for animals and humans. This work aimed to evaluate fungal distribution and also the prevalence of Aspergillus sections Fumigati, Flavi, Nigri and Circumdati from Coffea arabica (Arabica coffee) and Coffea canephora (Robusta coffee) green samples.

Professional exposure to fungal pathogens: an update to exposure conditions and exposure measurement

In many occupational settings an exposure to fungi occurs. Fungal exposure may occur for instance in the form of dermatocytes, yeasts or mold. Associated to the fungi themselves an exposure to cell wall components like ß(1 ? 3)-D-glucans, to mycotoxins or to microbial volatile compounds can occur. Health hazards may differ across species because fungi may produce different allergens and mycotoxins, and some species can infect humans. Occupational settings are often characterized by special exposure conditions with respect to duration, frequency and especially to the level of exposure resulting at least sometimes to high or very high fungal exposure. Because of these special conditions occupational settings are suitable for epidemiologic studies. However, the knowledge about occupational exposure to fungi and associated compounds like mycotoxins is still fragmentary and not well disseminated. An indication for a high fungal exposure is for instance the handling of dry natural products like grain, hay or herbal plants with a high specific surface and the tendency to release dust during handling. The fungal components often form the determinative part of such dusts and might be a vehicle to respiratory airways. The authors will present results of exposure measurements of occupational settings and exposure conditions which are only rarely investigated.

Fungal contamination in one hotel room: does carpet coating in the floor enhance fungal contamination?

Interest in bioaerosol exposure has increased significantly because it is now recognized that exposure to fungal agents is associated with a wide range of adverse health effects with a major impact on public health. Fungi are able to grow on almost all natural and synthetic materials, especially if they are hygroscopic or wet. Aim of the study: Several materials used indoors can contribute to enhance fungal contamination indoors. This study intended to understand the carpet influence on fungal contamination when used in the floor of a hotel room.

Exposure and risk assessment in occupational exposure to fungi: aspects to consider in highly contaminated settings

Although a clear correlation between levels of fungi in the air and health impacts has not been shown in epidemiological studies, fungi must be regarded as potential occupational health hazards. Fungi can have an impact on human health in four different ways: (1) they can infect humans, (2) they may act as allergens, (3) they can be toxigenic, or (4) they may cause inflammatory reactions. Fungi of concern in occupational hygiene are mostly non-pathogenic or facultative pathogenic (opportunistic) species, but are relevant as allergens and mycotoxins producers. It is known that the exclusive use of conventional methods for fungal quantification (fungal culture) may underestimate the results due to different reasons. The incubation temperature chosen will not be the most suitable for every fungal species, resulting in the inhibition of some species and the favouring of others. Differences in fungi growth rates may also result in data underestimation, since the fungal species with higher growth rates may inhibit others species’ growth. Finally, underestimated data can result from non-viable fungal particles that may have been collected or fungal species that do not grow in the culture media used, although these species may have clinical relevance in the context. Due to these constraints occupational exposure assessment, in setings with high fungal contamination levels, should follow these steps: Apply conventional methods to obtain fungal load information (air and surfaces) regarding the most critical scenario previously selected; Guideline comparation aplying or legal requirements or suggested limits by scientific and/or technical organizations. We should also compare our results with others from the same setting (if there is any); Select the most suitable indicators for each setting and apply conventional-culture methods and also molecular tools. These methodology will ensure a more real characterization of fungal burden in each setting and, consequently, permits to identify further measures regarding assessment of fungal metabolites, and also a more adequate workers health surveillance. The methodology applied to characterize fungal burden in several occupational environments, focused in Aspergillus spp. prevalence, will be present and discussed.

From the farm to the fork: fungal occupational exposure in the swine meat supply chain

Feed production, swine and slaughterhouses were already reported as occupational environments with high fungal contamination. This condition can ultimately lead to the development of several health conditions. This study aimed to characterize the occupational exposure to fungal burden in three different settings: swine feed unit, swine units and slaughterhouse.

New approach to study the real exposure to fungi in cork industry: nasal swabs mycobiota investigation coupled with screening on fungal resistance to azoles

The permanent contact with cork may lead to constant exposure to fungi, raising awareness as a potential occupational hazard in the cork industry.The presence of fungi belonging to the Penicillium glabrum complex has been associated with the development of respiratory diseases such as suberosis, one of the most prevalent diseases among workers from cork industries, besides occupational asthma. Azoles are used as pesticides but also the first line therapy in the treatment of Aspergillus infections; azole-resistance as been described as to have also an environmental source and is considered an emerging public health problem.The aim of this work was to characterize fungal distribution and to evaluate the presence of azole-resistant Aspergillus isolates in nose swab samples from the cork industry workers.