Advanced side information creation techniques and framework for Wyner-Ziv video coding

Recently, several distributed video coding (DVC) solutions based on the distributed source coding (DSC) paradigm have appeared in the literature. Wyner-Ziv (WZ) video coding, a particular case of DVC where side information is made available at the decoder, enable to achieve a flexible distribution of the computational complexity between the encoder and decoder, promising to fulfill novel requirements from applications such as video surveillance, sensor networks and mobile camera phones. The quality of the side information at the decoder has a critical role in determining the WZ video coding rate-distortion (RD) performance, notably to raise it to a level as close as possible to the RD performance of standard predictive video coding schemes. Towards this target, efficient motion search algorithms for powerful frame interpolation are much needed at the decoder. In this paper, the RD performance of a Wyner-Ziv video codec is improved by using novel, advanced motion compensated frame interpolation techniques to generate the side information. The development of these type of side information estimators is a difficult problem in WZ video coding, especially because the decoder only has available some reference, decoded frames. Based on the regularization of the motion field, novel side information creation techniques are proposed in this paper along with a new frame interpolation framework able to generate higher quality side information at the decoder. To illustrate the RD performance improvements, this novel side information creation framework has been integrated in a transform domain turbo coding based Wyner-Ziv video codec. Experimental results show that the novel side information creation solution leads to better RD performance than available state-of-the-art side information estimators, with improvements up to 2 dB: moreover, it allows outperforming H.264/AVC Intra by up to 3 dB with a lower encoding complexity.

Estudo do uso de hidrotalcites de Mg-Al como catalisadores heterogéneos para produção de biodiesel

A transesterificação de óleos vegetais ou gorduras animais com um álcool de baixo peso molecular é o principal processo utilizado na produção de biodiesel. Actualmente os processos industriais utilizam catalisadores homogéneos para acelerar a reacção. No entanto a utilização de catalisadores heterogéneos, no processo de transesterificação, tem sido sugerido por vários investigadores pois, são amigos do ambiente e podem ser regenerados e reutilizados portanto possibilitam a utilização de processos contínuos. Neste contexto, a utilização de hidrotalcites Mg-Al, como catalisadores heterogéneos para produção de biodiesel foi investigada neste trabalho experimental. As hidrotalcites com diferentes razões molares Mg/Al (Mg/Al=1, 2, 3 e 4) foram preparadas pelo método de co-precipitação. As diversas matrizes catalíticas obtidas, calcinadas a diferentes temperaturas, foram caracterizadas por difracção de raios X (DRX), análise térmica (TG-DSC), espectroscopia de infravermelhos (MIR), microscopia electrónica de varrimento (SEM) e isotérmicas de adsorção com azoto (BET). Estes catalisadores foram testados na metanólise de óleos vegetais para produzir biodiesel. As hidrotalcites Mg/Al=2, HT2A e HT2B (preparada com metade da quantidade de NaOH) calcinadas a 507 ºC e 700 ºC, respectivamente, foram as que apresentaram melhores resultados ao catalisar a reacção com um rendimento em éster superior a 97%, utilizando 2.5% da massa de catalisador, em relação à massa do óleo, razão molar metanol/óleo igual a 12, temperatura reaccional de 65 ºC durante 4h. Foi também investigada a reutilização do catalisador e o efeito da temperatura de calcinação. Constatou-se que o catalisador hidrotalcite HT2B apresentou melhor comportamento catalítico pois permitiu catalisar a reacção de transesterificação até três ciclos reaccionais, convertendo em ésteres 97%, 92% e 34% no primeiro, segundo e terceiro ciclos reaccionais, respectivamente. A análise de, algumas propriedades do biodiesel obtido como, o índice de acidez, a viscosidade e o índice de iodo mostraram que os resultados obtidos estão dentro dos valores limite recomendados pela norma EN 14214. Em anexo apresenta-se uma comunicação à First International Conference on Materials for Energy, Karlsruhe, 2010.

Perceptually driven video error protection using a distributed source coding approach

In video communication systems, the video signals are typically compressed and sent to the decoder through an error-prone transmission channel that may corrupt the compressed signal, causing the degradation of the final decoded video quality. In this context, it is possible to enhance the error resilience of typical predictive video coding schemes using as inspiration principles and tools from an alternative video coding approach, the so-called Distributed Video Coding (DVC), based on the Distributed Source Coding (DSC) theory. Further improvements in the decoded video quality after error-prone transmission may also be obtained by considering the perceptual relevance of the video content, as distortions occurring in different regions of a picture have a different impact on the user's final experience. In this context, this paper proposes a Perceptually Driven Error Protection (PDEP) video coding solution that enhances the error resilience of a state-of-the-art H.264/AVC predictive video codec using DSC principles and perceptual considerations. To increase the H.264/AVC error resilience performance, the main technical novelties brought by the proposed video coding solution are: (i) design of an improved compressed domain perceptual classification mechanism; (ii) design of an improved transcoding tool for the DSC-based protection mechanism; and (iii) integration of a perceptual classification mechanism in an H.264/AVC compliant codec with a DSC-based error protection mechanism. The performance results obtained show that the proposed PDEP video codec provides a better performing alternative to traditional error protection video coding schemes, notably Forward Error Correction (FEC)-based schemes. (C) 2013 Elsevier B.V. All rights reserved.

Calix[4]arene-carbazole-containing polymers: synthesis and properties

New highly fluorescent calix[4]arene-containing phenylene-alt-ethynylene-3,6- and 2,7-carbazolylene polymers (CALIX-PPE-CBZs) have been synthesized for the first time and their photophysical properties evaluated. Both polymers were obtained in good isolated yields (70-84%), having M-w ranging from 7660-26,700 g mol(-1). It was found that the diethynyl substitution (3,6- or 2,7-) pattern on the carbazole monomers markedly influences the degree of polymerization. The amorphous yellow polymers are freely soluble in several nonprotic organic solvents and have excellent film forming abilities. TG/DSC analysis evidences similar thermal behaviors for both polymers despite their quite different molecular weight distributions and main-chain connectivities (T-g, in the range 83-95 degrees C and decomposition onsets around 270 degrees C). The different conjugation lengths attained by the two polymers dictates much of their photophysical properties. Thus, whereas the fully conjugated CALIX-PPE-2,7-CBZ has its emission maximum at 430 nm (E-g = 2.84 eV; Phi(F) = 0.62, CHCl3), the 3,6-linked counterpart (CALIX-PPE-3,6-CBZ) fluoresces at 403 nm with a significant lower quantum yield (E-g = 3.06 eV; Phi(F) = 0.31, CHCl3). The optical properties of both polymers are predominantly governed by the intrachain electronic properties of the conjugated backbones owing to the presence of calix[4]arenes along the polymer chain which disfavor significant interchain interactions, either in fluid- or solid-state.