Análise da produção de uma amidase recombinante de pseudomonas aeruginosa

O presente trabalho consistiu na optimização da produção da amidase (EC.3.5.1.4 recombinante de Escherichia coli cujo gene foi isolado de Pseudomonas aeruginosa 8602. O efeito na agregação do enzima in vivo de diversos parâmetros de crescimento, tais como concentração de IPTG, temperatura de incubação e 3% de etanol, foi estudado por combinação da actividade enzimática com a espectrocospia de FTIR. Os resultados demosntraram que ocorreu a formação de amidase agregada na forma de corpos de inclusão em todas as condições de crescimento. A actividade enzimática máxima obtida na fracção solúvel ocorreu para a condição de 4,40 mM IPTG com etanol a 37º C enquanto que nas fracções insolúveis a actividade enzimática máxima obtida foi para a condição de 0,70mM IPTG com etanol a 25ºC. Verificou-se ainda que o etanol nas condições de crescimento de 25ºC permitiu uma elevada expressão de amidase, mas que agragou numa forma biologicamente activa apresentando para determinadas condições um aumento de 60% de actividade específica em relação à fracção solúvel. A espectrocospia de FTIR foi utilizada para o estudo de possíveis alterações estruturais da amidase produzida nas diversas condições de crescimento. Constatou-se assim que para todas as condições de crescimento, a amidase agregou na forma de corpos de inclusão devido ao aumento de folhas-β agregadas resultante de um aumento de interacções intermoleculares comparativamente ao enzima purificado. De um modo geral as condições a 25ºC formam maior quantidade de folhas-β agregadas que as condições a 37ºC, principalmente na presença de etanol. Verificou-se ainda que os corpos de inclusão das condições de crescimento de 37ºC apresentam uma estrutura secundária mais semelhante com a solução de amidase purificada relativamente às condições de 25ºC. No entanto as condições de 37ºC apresentam agragados com menor actividade possivelmente devido à ocorrência de interacções intermoleculares associadas a uma estrutura secundária mais semelhante à nativa. A solubilização não desnaturante da amidase nos corpos de inclusão foi efectuada com sucesso na presença de L-Arginina obtendo-se maior rendimento de solubilização para as condições a 37ºC, comprovando a menor quantidade de interacções intermoleculares nestes agregados e uma estrutura secundária do enzima agregado semelhante à nativa.

Bioconversion of D-glucose into D-glucosone by Glucose 2-oxidase from Coriolus versicolor at Moderate Pressures

Glucose 2-oxidase (pyranose oxidase, pyranose: oxygen-2-oxidoreductase, EC 1.1.3.10) from Coriolus versicolor catalyses the oxidation of D-glucose at carbon 2 in the presence of molecular O(2) producing D-glucosone (2-keto-glucose and D-arabino-2-hexosulose) and H(2)O(2). It was used to convert D-glucose into D-glucosone at moderate pressures (i.e. up to 150 bar) with compressed air in a modified commercial batch reactor. Several parameters affecting biocatalysis at moderate pressures were investigated as follows: pressure, [enzyme], [glucose], pH, temperature, nature of fluid and the presence of catalase. Glucose 2-oxidase was purified by immobilized metal affinity chromatography on epoxy-activated Sepharose 6B-IDA-Cu(II) column at pH 6.0. The rate of bioconversion of D-glucose increased with the pressure since an increase in the pressure with compressed air resulted in higher rates of conversion. On the other hand, the presence of catalase increased the rate of reaction which strongly suggests that H(2)O(2) acted as inhibitor for this reaction. The rate of bioconversion of D-glucose by glucose 2-oxidase in the presence of either nitrogen or supercritical CO(2) at 110 bar was very low compared with the use of compressed air at the same pressure. The optimum temperature (55 degrees C) and pH (5.0) of D-glucose bioconversion as well as kinetic parameters for this enzyme were determined under moderate pressure. The activation energy (E(a)) was 32.08 kJmol(-1) and kinetic parameters (V(max), K(m), K(cat) and K(cat)/K(m)) for this bioconversion were 8.8 Umg(-1) protein, 2.95 mM, 30.81 s(-1) and 10,444.06 s(-1)M(-1), respectively. The biomass of C. versicolor as well as the cell-free extract containing glucose 2-oxidase activity were also useful for bioconversion of D-glucose at moderate pressures. The enzyme was apparently stable at moderate pressures since such pressures did not affect significantly the enzyme activity.

Bioconversion of D-glucose into D-glucosone by immobilized glucose 2-oxidase from Coriolus versicolorat moderate pressures

The immobilized glucose 2-oxidase (pyranose oxidase, pyranose:oxygen-2-oxidoreductase, EC 1.1.3.10) from Coriolus versicolor was used to convert D-glucose into D-glucosone at moderate pressures, up to 150 bar, with compressed air in a modified commercial batch reactor. Several parameters affecting biocatalysis at moderate pressures were investigated as follows: pressure, different forms of immobilized biocatalysts, glucose concentration, pH, temperature and the presence of catalase. Glucose 2-oxidase (GOX2) was purified by immobilized metal affinity chromatography on epoxy-activated Sepharose 6B-IDA-Cu(II) column at pH 6.0. Purified enzyme and catalase were immobilized into a polyethersulfone (PES) membrane in the presence of glutaraldehyde and gelatin. Enhancement of the bioconversion of D-glucose was done by the pressure since an increase in the pressure with compressed air increases the conversion rates. The optimum temperature and pH for bioconversion of D-glucose were found to be 62 degrees C and pH 6.0, respectively and the activation energy (E(a)) was 28.01 kJ mol(-1). The apparent kinetic constants (V(max)' K(m)', K(cat)' and K(cat)/K(m)') for this bioconversion were 2.27 U mg(-1) protein, 11.15 mM, 8.33 s(-1) and 747.38 s(-1) M(-1), respectively. The immobilized biomass of C. versicolor as well as crude extract containing GOX2 activity were also useful for bioconversion of D-glucose at 65 bar with a yield of 69.9 +/- 3.8% and 91.3 +/- 1.2%, respectively. The immobilized enzyme was apparently stable for several months without any significant loss of enzyme activity. On the other hand, this immobilized enzyme was also stable at moderate pressures, since such pressures did not affect significantly the enzyme activity. (C) 2010 Elsevier Ltd. All rights reserved.

Development of a biosensor for urea assay based on amidase inhibition, using an ion-selective electrode

A biosensor for urea has been developed based on the observation that urea is a powerful active-site inhibitor of amidase, which catalyzes the hydrolysis of amides such as acetamide to produce ammonia and the corresponding organic acid. Cell-free extract from Pseudomonas aeruginosa was the source of amidase (acylamide hydrolase, EC 3.5.1.4) which was immobilized on a polyethersulfone membrane in the presence of glutaraldehyde; anion-selective electrode for ammonium ions was used for biosensor development. Analysis of variance was used for optimization of the biosensorresponse and showed that 30 mu L of cell-free extract containing 7.47 mg protein mL(-1), 2 mu L of glutaraldehyde (5%, v/v) and 10 mu L of gelatin (15%, w/v) exhibited the highest response. Optimization of other parameters showed that pH 7.2 and 30 min incubation time were optimum for incubation ofmembranes in urea. The biosensor exhibited a linear response in the range of 4.0-10.0 mu M urea, a detection limit of 2.0 mu M for urea, a response timeof 20 s, a sensitivity of 58.245 % per mu M urea and a storage stability of over 4 months. It was successfully used for quantification of urea in samples such as wine and milk; recovery experiments were carried out which revealed an average substrate recovery of 94.9%. The urea analogs hydroxyurea, methylurea and thiourea inhibited amidase activity by about 90%, 10% and 0%, respectively, compared with urea inhibition.

OC/EC ratio observations in Europe: Re-thinking the approach for apportionment between primary and secondary organic carbon

This study explores a large set of OC and EC measurements in PM(10) and PM(2.5) aerosol samples, undertaken with a long term constant analytical methodology, to evaluate the capability of the OC/EC minimum ratio to represent the ratio between the OC and EC aerosol components resulting from fossil fuel combustion (OC(ff)/EC(ff)). The data set covers a wide geographical area in Europe, but with a particular focus upon Portugal, Spain and the United Kingdom, and includes a great variety of sites: urban (background, kerbside and tunnel), industrial, rural and remote. The highest minimum ratios were found in samples from remote and rural sites. Urban background sites have shown spatially and temporally consistent minimum ratios, of around 1.0 for PM(10) and 0.7 for PM(2.5).The consistency of results has suggested that the method could be used as a tool to derive the ratio between OC and EC from fossil fuel combustion and consequently to differentiate OC from primary and secondary sources. To explore this capability, OC and EC measurements were performed in a busy roadway tunnel in central Lisbon. The OC/EC ratio, which reflected the composition of vehicle combustion emissions, was in the range of 03-0.4. Ratios of OC/EC in roadside increment air (roadside minus urban background) in Birmingham, UK also lie within the range 03-0.4. Additional measurements were performed under heavy traffic conditions at two double kerbside sites located in the centre of Lisbon and Madrid. The OC/EC minimum ratios observed at both sites were found to be between those of the tunnel and those of urban background air, suggesting that minimum values commonly obtained for this parameter in open urban atmospheres over-predict the direct emissions of OC(ff) from road transport. Possible reasons for this discrepancy are explored. (C) 2011 Elsevier Ltd. All rights reserved.

Size-segregated chemical composition of aerosol emissions in an urban road tunnel in Portugal

An atmospheric aerosol study was performed in 2008 inside an urban road tunnel, in Lisbon, Portugal. Using a high volume impactor, the aerosol was collected into four size fractions (PM0.5, PM0.5-1, PM1-2.5 and PM2.5-10) and analysed for particle mass (PM), organic and elemental carbon (OC and EC), polycyclic aromatic hydrocarbons (PAH), soluble inorganic ions and elemental composition. Three main groups of compounds were discriminated in the tunnel aerosol: carbonaceous, soil component and vehicle mechanical wear. Measurements indicate that Cu can be a good tracer for wear emissions of road traffic. Cu levels correlate strongly with Fe, Mn, Sn and Cr, showing a highly linear constant ratio in all size ranges, suggesting a unique origin through sizes. Ratios of Cu with other elements can be used to source apportion the trace elements present in urban atmospheres, mainly on what concerns coarse aerosol particles. (C) 2013 Elsevier Ltd. All rights reserved.

A contabilidade até à harmonização contabilística: as grandes mudanças do SNC e seus impactos

Mestrado em Contabilidade

Tecnologia, economia e política: o telégrafo como antecessor da Internet

Na história da comunicação moderna, após o desenvolvimento da imprensa, o telégrafo desencadeou uma revolução nas comunicações da qual a Internet é a herdeira contemporânea. A reflexão sobre o telégrafo pode abrir perspectivas sobre as tendências, as possibilidades e os problemas colocados pela Internet. O telégrafo tem sido objecto de estudos que tendem a privilegiar sobretudo a história desta tecnologia, o contexto social e o seu significado institucional (ex. Thompson, 1947; Standage 2007 [1998]). James W. Carey, no seu ensaio “Technology and Ideology. The Case of the Telegraph”, propõe uma abordagem distinta. No telégrafo, vê o protótipo de muitos impérios comerciais de base científico-tecnológica que se lhe seguiram, um modelo pioneiro para a gestão de empresas complexas; um dos promotores da configuração nacional do mercado e de um sistema nacional de comunicações; e um catalisador de um pensamento futurista e utópico das tecnologias da informação. Tendo no horizonte a revolução das comunicações promovida pela Internet, o artigo revisita aquele ensaio seminal para explorar o alcance, mas também os problemas de uma perspectiva que concebe a inovação do telégrafo como uma metáfora para todas as inovações que anunciaram o período histórico da modernidade e que tem determinado até aos nossos dias as principais linhas de desenvolvimento das comunicações modernas.

A neutralidade fiscal no caso da fusão inversa

Mestrado em Fiscalidade

NZEB: um desafio para a engenharia civil

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil