Knee muscle strength, balance and functional independence in persons with stroke

Purpose: to investigate the relationship between knee muscle strength, balance and functional independence within the first month after stroke. Relevance: cerebral vascular disease is one of the main causes of morbidity, disability and mortality in developed countries. Problems with movement control are frequent after stroke. Lower limb weakness and impaired balance are common problems that are related with the risk of falls and are likely to interfere with the ability to perform daily life activities. Physiotherapy intervention usually starts early after stroke and addresses impairments related to movement and posture in order to improve motor recovery and restore function.

Muscle strength, balance and functional independence in persons with stroke

Cerebral vascular disease is one of the main causes of morbidity, disability and mortality in developed countries. Problems with movement control are frequent after stroke. Lower limb weakness and impaired balance are common problems that are related with the risk of falls and are likely to interfere with the ability to perform daily life activities. Physiotherapy intervention usually starts early after stroke and addresses impairments related to movement and posture in order to improve motor recovery and restore function. Purpose: to investigate the relationship between knee muscle strength, balance and functional independence within the first month after stroke.

Effects of lower limb strengthening on balance and function in persons who suffered a stroke

Introduction - Cerebrovascular diseases, and among them, cerebral vascular accidents, are one of the main causes of morbidity and disability at European Union countries. Clinical framework resulting from these diseases include important limitations in functional ability of the these patients Postural control dysfunctions are one of the most common and devastating consequences of a stroke interfering with function and autonomy and affecting different aspects of people’s life and contributing to decrease quality of life. Neurological physiotherapy plays a central role in the recovery of movement and posture, however it is necessary to study the efficacy of techniques that physiotherapists use to treat these problems. Objectives - The aim of this study was to investigate the effects of a physiotherapy intervention program, based on oriented tasks and strengthening of the affected lower limb, on balance and functionality of individuals who have suffered a stroke. In addition our study aimed to investigate the effect of strength training of the affected lower limb on muscle tone.

Fast optimum-predictive control and capacitor voltage balancing strategy for bipolar back-to-back NPC converters in high-voltage direct current transmission systems

Multilevel power converters have been introduced as the solution for high-power high-voltage switching applications where they have well-known advantages. Recently, full back-to-back connected multilevel neutral point diode clamped converters (NPC converter) have been used inhigh-voltage direct current (HVDC) transmission systems. Bipolar-connected back-to-back NPC converters have advantages in long-distance HVDCtransmission systems over the full back-to-back connection, but greater difficulty to balance the dc capacitor voltage divider on both sending and receiving end NPC converters. This study shows that power flow control and dc capacitor voltage balancing are feasible using fast optimum-predictive-based controllers in HVDC systems using bipolar back-to-back-connected five-level NPC multilevel converters. For both converter sides, the control strategytakes in account active and reactive power, which establishes ac grid currents in both ends, and guarantees the balancing of dc bus capacitor voltages inboth NPC converters. Additionally, the semiconductor switching frequency is minimised to reduce switching losses. The performance and robustness of the new fast predictive control strategy, and its capability to solve the DC capacitor voltage balancing problem of bipolar-connected back-to-back NPCconverters are evaluated.

HVDC transmission systems: Bipolar back-to-back diode clamped multilevel converter with fastoptimum-predictive control and capacitor balancing strategy

Voltage source multilevel power converter structures are being considered for high power high voltage applications where they have well known advantages. Recently, full back-to-back connected multilevel neutral diode clamped converters (NPC) have been used in high voltage direct current (HVDC) transmission systems. Bipolar back-to-back connection of NPCs have advantages in long distance HVDC transmission systems, but highly increased difficulties to balance the dc capacitor voltage dividers on both sending and receiving end NPCs. This paper proposes a fast optimum-predictive controller to balance the dc capacitor voltages and to control the power flow in a long distance HVDCsystem using bipolar back-to-back connected NPCs. For both converter sides, the control strategy considers active and reactive power to establish ac grid currents on sending and receiving ends, while guaranteeing the balancing of both NPC dc bus capacitor voltages. Furthermore, the fast predictivecontroller minimizes the semiconductor switching frequency to reduce global switching losses. The performance and robustness of the new fast predictive control strategy and the associated dc capacitors voltage balancing are evaluated. (C) 2011 Elsevier B.V. All rights reserved.

Task-oriented training and lower limb strengthening to improve balance and function after stroke: a pilot study

This study investigated the effects of task-oriented training and strengthening of the affected lower limb on balance and function in people who have suffered a stroke. Sixteen male adults, with a mean age of 58 (SD 6.3) years, undergoing outpatient physiotherapy less than 1 month after a single stroke in the territory of the middle cerebral artery were recruited. Participants were allocated to one of two groups: the strengthening group (SG) or control group (CG). The main measures used were the Berg Balance Scale (BBS), Barthel Index (BI) and Modified Ashworth Scale (MAS). After 12 weeks of intervention, both groups showed improvements in outcome measures. For BBS, there was a significant difference between groups, with an increase of 26 points in the SG and 11 points in the CG. For BI, the SG improved by 39 points and the CG improved by 22 points. After intervention, the difference between groups was not significant. For MAS, differences were not significant, showing that for both groups intervention programmes did not increase spasticity. In conclusion, physiotherapy intervention for postural control dysfunctions after stroke seems to benefit from strength training of the affected lower limb and the practising functional tasks. A large randomized controlled trial is recommended to further investigate the effects of this intervention.

Relationship of balance to function independence in stroke survivors

Cerebral vascular disease is the primary cause of permanent disability in Portugal. Impaired stability is considered an important feature after stroke as it is related with higher risk of falls and functional dependence. Physiotherapy intervention usually starts early after stroke in order to direct motor recovery and help patients to improve their ability to perform activities of daily living (ADL). Purpose: to investigate the relationship of balance to functionality in acute stroke patients. Methods: 16 subjects (8 women and 8 men), mean age 63,62 ± 2,16y, with unilateral ischemic stroke in the middle cerebral artery territory, who were admitted to physiotherapy department of Fernando Fonseca Hospital in Portugal, within the first month after stroke were recruited to participate in this study. All subjects have no cognitive impairment according to Mini Mental State, no history of lower extremity orthopedic problems and no other disease that could interfere with treatments. All patients gave their inform consent to participate in this study. Subjects were assessed with the Modified Barthel Index (MBI) and the Berg Balance Scale (BBS).

Direct Power Control of Matrix Converter Based Unified Power Flow Controllers

This paper presents the Direct Power Control of Three-Phase Matrix Converters (DPC-MC) operating as Unified Power Flow Controllers (UPFC). Since matrix converters allow direct AC/AC power conversion without intermediate energy storage link, the resulting UPFC has reduced volume and cost, together with higher reliability. Theoretical principles of DPC-MC method are established based on an UPFC model, together with a new direct power control approach based on sliding mode control techniques. As a result, active and reactive power can be directly controlled by selection of an appropriate switching state of matrix converter. This new direct power control approach associated to matrix converters technology guarantees decoupled active and reactive power control, zero error tracking, fast response times and timely control actions. Simulation results show good performance of the proposed system.

Predictive Optimal Matrix Converter Control for a Dynamic Voltage Restorer with Flywheel Energy Storage

This paper presents a predictive optimal matrix converter controller for a flywheel energy storage system used as Dynamic Voltage Restorer (DVR). The flywheel energy storage device is based on a steel seamless tube mounted as a vertical axis flywheel to store kinetic energy. The motor/generator is a Permanent Magnet Synchronous Machine driven by the AC-AC Matrix Converter. The matrix control method uses a discrete-time model of the converter system to predict the expected values of the input and output currents for all the 27 possible vectors generated by the matrix converter. An optimal controller minimizes control errors using a weighted cost functional. The flywheel and control process was tested as a DVR to mitigate voltage sags and swells. Simulation results show that the DVR is able to compensate the critical load voltage without delays, voltage undershoots or overshoots, overcoming the input/output coupling of matrix converters.

Modeling, control and simulation of full-power converter wind turbines equipped with permanent magnet synchronous generator

In this paper, two wind turbines equipped with a permanent magnet synchronous generator (PMSG) and respectively with a two-level or a multilevel converter are simulated in order to access the malfunction transient performance. Three different drive train mass models, respectively, one, two and three mass models, are considered in order to model the bending flexibility of the blades. Moreover, a fractional-order control strategy is studied comparatively to a classical integer-order control strategy. Computer simulations are carried out, and conclusions about the total harmonic distortion (THD) of the electric current injected into the electric grid are in favor of the fractional-order control strategy.

Power converter topologies for wind energy conversion systems: Integrated modeling, control strategy and performance simulation

This paper presents new integrated model for variable-speed wind energy conversion systems, considering a more accurate dynamic of the wind turbine, rotor, generator, power converter and filter. Pulse width modulation by space vector modulation associated with sliding mode is used for controlling the power converters. Also, power factor control is introduced at the output of the power converters. Comprehensive performance simulation studies are carried out with matrix, two-level and multilevel power converter topologies in order to adequately assert the system performance. Conclusions are duly drawn.

A Pitch Control Malfunction Analysis for Wind Turbines with Permanent Magnet Synchronous Generator and Full-power Converters: Proportional Integral Versus Fractional-order Controllers

A transient analysis for two full-power converter wind turbines equipped with a permanent magnet synchronous generator is studied in this article, taking into consideration, as a new contribution to earlier studies, a pitch control malfunction. The two full-power converters considered are, respectively, a two-level and a multi-level converter. Moreover, a novel control strategy based on fractional-order controllers for wind turbines is studied. Simulation results are presented; conclusions are in favor of the novel control strategy, improving the quality of the energy injected into the electric grid.

WPAC: wireless payment and access control: dispositivos móveis no pagamento de serviços e controlo de acessos

A rápida evolução dos dispositivos móveis e das tecnologias de comunicação sem fios transformou o telemóvel num poderoso dispositivo de computação móvel. A necessidade de estar sempre contactável, comum à civilização moderna, tem aumentado a dependência deste dispositivo, sendo transportado pela maioria das pessoas num ambiente urbano e assumindo um papel talvez mais importante que a própria carteira. A ubiquidade e capacidade de computação dos telemóveis aumentam o interesse no desenvolvimento de serviços móveis, além de tradicionais serviços de voz. Um telemóvel pode em breve tornar-se um elemento activo nas nossas tarefas diárias, servindo como um instrumento de pagamento e controlo de acessos, proporcionando assim novas interfaces para serviços existentes. A unificação de vários serviços num único dispositivo é um desafio que pode simplificar a nossa rotina diária e aumentar o conforto, no limite deixaremos de necessitar de dinheiro físico, cartões de crédito ou débito, chaves de residência e de veículos automóveis, ou inclusive documentos de identificação como bilhetes de identidade ou passaportes. O interesse demonstrado pelos intervenientes, desde os fabricantes de telemóveis e operadores de rede móvel até às instituições financeiras, levaram ao aparecimento de múltiplas soluções de serviços móveis. Porém estas soluções respondem geralmente a problemas específicos, apenas contemplando um fornecedor de serviços ou uma determinada operação de pagamento, como seja a compra de bilhetes ou pagamento de estacionamento. Estas soluções emergentes consistem também tipicamente em especificações fechadas e protocolos proprietários. A definição de uma arquitectura genérica, aberta interoperável e extensível é necessária para que os serviços móveis possam ser adoptados de uma forma generalizada por diferentes fornecedores de serviços e para diversos tipos de pagamento. A maior parte das soluções actuais de pagamento móvel depende de comunicações através da rede móvel, algumas utilizam o telemóvel apenas como uma interface de acesso à internet enquanto outras possibilitam o envio de um SMS (Short Message Service) para autorizar uma transacção, o que implica custos de comunicação em todas as operações de pagamento. Este custo de operação torna essas soluções inadequadas para a realização de micropagamentos e podem por isso ter uma aceitação limitada por parte dos clientes. As soluções existentes focam-se maioritariamente em pagamentos à distância, não tirando partido das características do pagamento presencial e não oferecendo por isso uma verdadeira alternativa ao modelo actual de pagamento com cartões de crédito/débito. As capacidades computacionais dos telemóveis e suporte de diversos protocolos de comunicação sem fio local não têm sido aproveitadas, vendo o telemóvel apenas como um terminal GSM (Global System for Mobile Communications) e não oferecendo serviços adicionais como seja a avaliação dinâmica de risco ou controlo de despesas. Esta dissertação propõe e valida, através de um demonstrador, uma aquitectua aberta para o pagamento e controlo de acesso baseado em dispositivos móveis, intitulada WPAC (Wireless Payment and Access Control). Para chegar à solução apresentada foram estudadas outras soluções de pagamento, desde o aparecimento dos cartões de débito até a era de pagamentos electrónicos móveis, passando pelas soluções de pagamento através da internet. As capacidades dos dispositivos móveis, designadamente os telemóveis, e tecnologias de comunicação sem fios foram também analisadas a fim de determinar o estado tecnológico actual. A arquitectura WPAC utiliza padrões de desenho utilizados pela indústria em soluções de sucesso, a utilização de padrões testados e a reutilização de soluções com provas dadas permite aumentar a confiança nesta solução, um destes exemplos é a utilização de uma infra-estrutura de chave pública para o estabelecimento de um canal de comunicação seguro. Esta especificação é uma arquitectura orientada aos serviços que utiliza os Web Services para a definição do contracto do serviço de pagamento. A viabilidade da solução na orquestração de um conjunto de tecnologias e a prova de conceito de novas abordagens é alcançada com a construção de um protótipo e a realização de testes. A arquitectura WPAC possibilita a realização de pagamentos móveis presenciais, isto é, junto do fornecedor de bens ou serviços, seguindo o modelo de pagamento com cartões de crédito/débito no que diz respeito aos intervenientes e relações entre eles. Esta especificação inclui como aspecto inovador a avaliação dinâmica de risco, que utiliza o valor do pagamento, a existência de pagamentos frequentes num período curto de tempo, e a data, hora e local do pagamento como factores de risco; solicitando ao cliente o conjunto de credenciais adequado ao risco avaliado, desde códigos pessoais a dados biométricos. É também apresentada uma alternativa ao processo normal de pagamento, que apesar de menos cómoda permite efectuar pagamentos quando não é possível estabelecer um canal de comunicação sem fios, aumentando assim a tolerância a falhas. Esta solução não implica custos de operação para o cliente na comunicação com o ponto de venda do comerciante, que é realizada através de tecnologias de comunicação local sem fios, pode ser necessária a comunicação através da rede móvel com o emissor do agente de pagamento para a actualização do agente de software ou de dados de segurança, mas essas transmissões são ocasionais. O modelo de segurança recorre a certificados para autenticação dos intervenientes e a uma infra-estrutura de chave pública para cifra e assinatura de mensagens. Os dados de segurança incluídos no agente de software móvel, para desabilitar a cópia ou corrupção da aplicação mas também para a comparação com as credenciais inseridas pelo cliente, devem igualmente ser encriptados e assinados de forma a garantir a sua confidencialidade e integridade. A arquitectura de pagamento utiliza o standard de Web Services, que é amplamente conhecido, aberto e interoperável, para definição do serviço de pagamento. Existem extensões à especificação de Web Services relativas à segurança que permitem trocar itens de segurança e definem o modo de cifra e assinatura de mensagens, possibilitando assim a sua utilização em aplicações que necessitem de segurança como é o caso de serviços de pagamento e controlo de acesso. O contracto de um Web Service define o modo de invocação dos serviços, transmissão de informação e representação de dados, sendo normalmente utilizado o protocolo SOAP que na prática não é mais que um protocolo de troca de mansagens XML (eXtensible Markup Language). O envio e recepção de mensagens XML; ou seja, a transmissão de simples sequências de caracteres, é suportado pela maioria dos protocolos de comunicação, sendo portanto uma solução abrangente que permite a adopção de diversas tecnologias de comunicação sem fios. O protótipo inclui um agente de software móvel, implementado sobre a forma de uma MIDlet, aplicação Java para dispositivos móveis, que implementa o protocolo de pagamento comunicando sobre uma ligação Bluetooth com o ponto de venda do comerciante, simulado por uma aplicação desenvolvida sobre a plataforma .NET e que por isso faz prova da heterogeneidade da solução. A comunicação entre o comerciante e o seu banco para autorização do pagamento e transferência monetária utiliza o protocolo existente para a autorização de pagamentos, com base em cartões de crédito/débito. A definição desta especificação aberta e genérica em conjunto com o forte interesse demonstrado pelos intervenientes, proporciona uma boa perspectiva em termos de adopção da solução, o que pode impulsionar a implementação de serviços móveis e dessa forma simplificar as rotinas diárias das pessoas. Soluções móveis de pagamento reduzem a necessidade de transportar vários cartões de crédito/débito na nossa carteira. A avaliação dinâmica de risco permite aumentar a segurança dos pagamentos, com a solicitação de mais credenciais ao cliente para pagamentos com um maior risco associado, sendo um ponto importante quer para os clientes quer para as instituições financeiras pois diminui o risco de fraude e aumenta a confiança no sistema. Esta solução de pagamento electrónico pode também facilitar a consulta de pagamentos efectuados e saldos, mantendo um histórico dos movimentos, o que não é possível nos cartões de crédito/débito sem uma visita a uma ATM (Automated Teller Machine) ou utilização de homebanking.

Fractional-order control and simulation of wind energy systems with PMSG/full-power converter topology

This paper presents a new integrated model for the simulation of wind energy systems. The proposed model is more realistic and accurate, considering a variable-speed wind turbine, two-mass rotor, permanent magnet synchronous generator (PMSG), different power converter topologies, and filters. Additionally, a new control strategy is proposed for the variable-speed operation of wind turbines with PMSG/full-power converter topology, based on fractional-order controllers. Comprehensive simulation studies are carried out with matrix and multilevel power converter topologies, in order to adequately assert the system performance in what regards the quality of the energy injected into the electric grid. Finally, conclusions are duly drawn.

RFID together with multi-agent systems to control global value chains

Nowadays, the cooperative intelligent transport systems are part of a largest system. Transportations are modal operations integrated in logistics and, logistics is the main process of the supply chain management. The supply chain strategic management as a simultaneous local and global value chain is a collaborative/cooperative organization of stakeholders, many times in co-opetition, to perform a service to the customers respecting the time, place, price and quality levels. The transportation, like other logistics operations must add value, which is achieved in this case through compression lead times and order fulfillments. The complex supplier's network and the distribution channels must be efficient and the integral visibility (monitoring and tracing) of supply chain is a significant source of competitive advantage. Nowadays, the competition is not discussed between companies but among supply chains. This paper aims to evidence the current and emerging manufacturing and logistics system challenges as a new field of opportunities for the automation and control systems research community. Furthermore, the paper forecasts the use of radio frequency identification (RFID) technologies integrated into an information and communication technologies (ICT) framework based on distributed artificial intelligence (DAI) supported by a multi-agent system (MAS), as the most value advantage of supply chain management (SCM) in a cooperative intelligent logistics systems. Logistical platforms (production or distribution) as nodes of added value of supplying and distribution networks are proposed as critical points of the visibility of the inventory, where these technological needs are more evident.