Viagens pela unidade educacional e terapêutica, no estabelecimento prisional de Tires

No âmbito da unidade curricular, Estágio Profissional com Relatório Final, do 2.º ano do Mestrado em Teatro e Comunidade da Escola Superior de Teatro e Cinema, propus realizar um trabalho prático no Estabelecimento Prisional de Tires (EPT). O estágio decorreu de 15 de Maio a 22 de Julho de 2009, na Unidade Educacional e Terapêutica (UET) da prisão de Tires. Durante este período, desenvolvi o meu projecto de estágio, tendo sido sempre acompanhada pelo orientador responsável.

Processo de conversão química da liga de alumínio 2024-T3 de aplicação aeronáutica

A presente tese teve por base o estudo da conversão química da liga de alumínio 2024T3 de aplicação aeronáutica. O trabalho experimental foi desenvolvido na OGMA, Indústria Aeronáutica de Portugal S.A., durante o período de, aproximadamente 1 ano, que coincidiu com a realização de um estágio profissional nesta empresa por parte da mestranda. A referida empresa, tem como actividade a prestação de serviços de Manutenção, Revisão, Modernização, de Aeronaves, Motores e Componentes, Fabricação e Montagem de Estruturas. Integrada na OGMA, encontra-se a área de tratamentos electroquímicos, TE’S, na qual são realizados serviços de manutenção de material aeronáutico e de peças de fabricação. Estes serviços baseiam-se em processos de electrodeposição e conversão química. De modo a garantir um controlo de qualidade e correcto funcionamento dos diversos processos existe, inserido na área TE’S, um laboratório químico. O presente trabalho experimental, realizado na área TE’S, assenta no processo de conversão química, por imersão, de provetes da liga Al 2024-T3, referente a todos os contratos da OGMA. Estes contratos possuem especificações para aplicação do revestimento de conversão química, por imersão, em alumínio e suas ligas. Estas especificações incluem requisitos de qualidade, nos quais se encontra inserido o controlo periódico do processo. Deste modo, o processo é sujeito a um controlo periódico mensal que consiste na avaliação da qualidade dos tratamentos. A qualidade dos revestimentos obtidos, por conversão química, é assegurada através da avaliação dos resultados dos ensaios aos provetes. O estudo experimental desenvolvido focou-se nos ensaios de resistência à corrosão (nevoeiro salino) requeridos nos contratos. O intuito de realizar um estudo sobre o processo de conversão química por imersão de provetes da liga Al 2024 T3 e subsequente foco no ensaio de resistência à corrosão (nevoeiro salino), assenta no facto de ter-se vindo a observar, nos últimos anos, corrosão por pitting em vários lotes destes provetes, após serem sujeitos às sequências de processo de conversão química e antes de perfazerem a totalidade de 168 horas na câmara de nevoeiro salino, não superando este critério de qualidade do revestimento. Na perspectiva de colmatar a referida situação, procedeu-se à realização de ensaios de despiste nos provetes representativos da liga, com especial incidência na variação dos intervalos de tempo de imersão, pré-estabelecidos pelas especificações aplicáveis, e observação do seu comportamento quando sujeitos ao ensaio de nevoeiro salino.

Avaliação da qualidade de vida em doentes com insuficiência cardíaca submetidos a terapêutica com cardioversor desfibrilhador implantável

Objectivos do estudo: a) avaliar o efeito mantido da terapêutica por CDI na qualidade de vida dos doentes com insuficiência cardíaca; b) avaliar a relação da esperança com a qualidade de vida.

Evaluating Tsunami Impact on the Gulf of Cadiz Coast (Northeast Atlantic).

The Gulf of Cadiz coasts are exposed to tsunamis. Emergency planning tools are now taking into account this fact, especially because a series of historical occurrences were strikingly significant, having left strong evidence behind, in the mareographic records, the geological evidence or simply the memory of the populations. The study area is a strip along the Algarve coast, south Portugal, an area known to have been heavily impacted by the 1 November 1755 event. In this study we use two different tsunami scenarios generated by the rupture of two thrust faults identified in the area, corresponding to 8.1-8.3 magnitude earthquakes. Tsunami propagation and inundation computation is performed using a non-linear shallow water code with bottom friction. Numerical modeling results are presented in terms of flow depth and current velocity with maximum values of 7 m and 8 m/s for inundation depth and flow speed, respectively. These results constitute a valuable tool for local authorities, emergency and decision planners to define the priority zones where tsunami mitigation measures must be implemented and to develop tsunami-resilient communities.

Bioconversion of D-glucose into D-glucosone by immobilized glucose 2-oxidase from Coriolus versicolorat moderate pressures

The immobilized glucose 2-oxidase (pyranose oxidase, pyranose:oxygen-2-oxidoreductase, EC 1.1.3.10) from Coriolus versicolor was used to convert D-glucose into D-glucosone at moderate pressures, up to 150 bar, with compressed air in a modified commercial batch reactor. Several parameters affecting biocatalysis at moderate pressures were investigated as follows: pressure, different forms of immobilized biocatalysts, glucose concentration, pH, temperature and the presence of catalase. Glucose 2-oxidase (GOX2) was purified by immobilized metal affinity chromatography on epoxy-activated Sepharose 6B-IDA-Cu(II) column at pH 6.0. Purified enzyme and catalase were immobilized into a polyethersulfone (PES) membrane in the presence of glutaraldehyde and gelatin. Enhancement of the bioconversion of D-glucose was done by the pressure since an increase in the pressure with compressed air increases the conversion rates. The optimum temperature and pH for bioconversion of D-glucose were found to be 62 degrees C and pH 6.0, respectively and the activation energy (E(a)) was 28.01 kJ mol(-1). The apparent kinetic constants (V(max)' K(m)', K(cat)' and K(cat)/K(m)') for this bioconversion were 2.27 U mg(-1) protein, 11.15 mM, 8.33 s(-1) and 747.38 s(-1) M(-1), respectively. The immobilized biomass of C. versicolor as well as crude extract containing GOX2 activity were also useful for bioconversion of D-glucose at 65 bar with a yield of 69.9 +/- 3.8% and 91.3 +/- 1.2%, respectively. The immobilized enzyme was apparently stable for several months without any significant loss of enzyme activity. On the other hand, this immobilized enzyme was also stable at moderate pressures, since such pressures did not affect significantly the enzyme activity. (C) 2010 Elsevier Ltd. All rights reserved.

Routine screening of harmful microorganisms in beach sands: implications to public health

Beaches worldwide provide recreational opportunities to hundreds of millions of people and serve as important components of coastal economies. Beach water is often monitored for microbiological quality to detect the presence of indicators of human sewage contamination so as to prevent public health outbreaks associated with water contact. However, growing evidence suggests that beach sand can harbor microbes harmful to human health, often in concentrations greater than the beach water. Currently, there are no standards for monitoring, sampling, analyzing, or managing beach sand quality. In addition to indicator microbes, growing evidence has identified pathogenic bacteria, viruses, and fungi in a variety of beach sands worldwide. The public health threat associated with these populations through direct and indirect contact is unknown because so little research has been conducted relating to health outcomes associated with sand quality. In this manuscript, we present the consensus findings of a workshop of experts convened in Lisbon, Portugal to discuss the current state of knowledge on beach sand microbiological quality and to develop suggestions for standardizing the evaluation of sand at coastal beaches. The expert group at the "Microareias 2012" workshop recommends that 1) beach sand should be screened for a variety of pathogens harmful to human health, and sand monitoring should then be initiated alongside regular water monitoring; 2) sampling and analysis protocols should be standardized to allow proper comparisons among beach locations; and 3) further studies are needed to estimate human health risk with exposure to contaminated beach sand. Much of the manuscript is focused on research specific to Portugal, but similar results have been found elsewhere, and the findings have worldwide implications.

Argumentos para uma humanização do ensino das ciências

Identificando a rutura no desenvolvimento da ciência entre o contexto de descoberta e o contexto de justificação, julgamos poder entender melhor a dominação do ensino transmissivo da ciência em contexto escolar e melhor argumentar para a sua superação. Por outro lado, o argumento que aqui defendemos para recuperar, para o contexto de sala de aula, a fortíssima chama cultural que a ciência transporta nos seus conceitos, leis e teorias, bem como no seu próprio processo de desenvolvimento, tem uma tradição enraizada na cultura portuguesa que exploramos.

The effect of metal transfer modes and shielding gas composition on the emission of ultraafine particles in MAG steel welding

The present study aims to characterize ultrafine particles emitted during gas metal arc welding of mild steel and stainless steel, using different shielding gas mixtures, and to evaluate the effect of metal transfer modes, controlled by both processing parameters and shielding gas composition, on the quantity and morphology of the ultrafine particles. It was found that the amount of emitted ultrafine particles (measured by particle number and alveolar deposited surface area) are clearly dependent from the main welding parameters, namely the current intensity and the heat input of the Welding process. The emission of airborne ultrafine particles increases with the current intensity as fume formation rate does. When comparing the shielding gas mixtures, higher emissions were observed for more oxidizing mixtures, that is, with higher CO2 content, which means that these mixtures originate higher concentrations of ultrafine particles (as measured by number of particles. by cubic centimeter of air) and higher values of alveolar deposited surface area of particles, thus resulting in a more hazardous condition regarding welders exposure.

ECG-based biometrics: A real time classification approach

Behavioral biometrics is one of the areas with growing interest within the biosignal research community. A recent trend in the field is ECG-based biometrics, where electrocardiographic (ECG) signals are used as input to the biometric system. Previous work has shown this to be a promising trait, with the potential to serve as a good complement to other existing, and already more established modalities, due to its intrinsic characteristics. In this paper, we propose a system for ECG biometrics centered on signals acquired at the subject's hand. Our work is based on a previously developed custom, non-intrusive sensing apparatus for data acquisition at the hands, and involved the pre-processing of the ECG signals, and evaluation of two classification approaches targeted at real-time or near real-time applications. Preliminary results show that this system leads to competitive results both for authentication and identification, and further validate the potential of ECG signals as a complementary modality in the toolbox of the biometric system designer.

Physical layer aware network architecture for the future internet

In this article, physical layer awareness in access, core, and metro networks is addressed, and a Physical Layer Aware Network Architecture Framework for the Future Internet is presented and discussed, as proposed within the framework of the European ICT Project 4WARD. Current limitations and shortcomings of the Internet architecture are driving research trends at a global scale toward a novel, secure, and flexible architecture. This Future Internet architecture must allow for the co-existence and cooperation of multiple networks on common platforms, through the virtualization of network resources. Possible solutions embrace a full range of technologies, from fiber backbones to wireless access networks. The virtualization of physical networking resources will enhance the possibility of handling different profiles, while providing the impression of mutual isolation. This abstraction strategy implies the use of well elaborated mechanisms in order to deal with channel impairments and requirements, in both wireless (access) and optical (core) environments.

Evaluation of the influence of testing parameters on the melt flow index of thermoplastics

The main goals of the present work are the evaluation of the influence of several variables and test parameters on the melt flow index (MFI) of thermoplastics, and the determination of the uncertainty associated with the measurements. To evaluate the influence of test parameters on the measurement of MFI the design of experiments (DOE) approach has been used. The uncertainty has been calculated using a "bottom-up" approach given in the "Guide to the Expression of the Uncertainty of Measurement" (GUM). Since an analytical expression relating the output response (MFI) with input parameters does not exist, it has been necessary to build mathematical models by adjusting the experimental observations of the response variable in accordance with each input parameter. Subsequently, the determination of the uncertainty associated with the measurement of MFI has been performed by applying the law of propagation of uncertainty to the values of uncertainty of the input parameters. Finally, the activation energy (Ea) of the melt flow at around 200 degrees C and the respective uncertainty have also been determined.

Contabilidade criativa, ética e responsabilidade social das empresas

Doutoramento em Gestão

Previsão de diagramas de carga via Holt-Winters com três sazonalidades

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Complementary filter design with three frequency bands: robot attitude estimation

This paper extents the by now classic sensor fusion complementary filter (CF) design, involving two sensors, to the case where three sensors that provide measurements in different bands are available. This paper shows that the use of classical CF techniques to tackle a generic three sensors fusion problem, based solely on their frequency domain characteristics, leads to a minimal realization, stable, sub-optimal solution, denoted as Complementary Filters3 (CF3). Then, a new approach for the estimation problem at hand is used, based on optimal linear Kalman filtering techniques. Moreover, the solution is shown to preserve the complementary property, i.e. the sum of the three transfer functions of the respective sensors add up to one, both in continuous and discrete time domains. This new class of filters are denoted as Complementary Kalman Filters3 (CKF3). The attitude estimation of a mobile robot is addressed, based on data from a rate gyroscope, a digital compass, and odometry. The experimental results obtained are reported.