Factores determinantes na adesão parental ao tratamento oclusivo em crianças amblíopes

Introdução - Estudos de investigação recentes apontam para o facto de que cerca de 1/3 dos olhos amblíopes não chegam à acuidade visual de 5/10 apesar da terapia oclusiva. Uma das razões apontadas é a não adesão ao tratamento. O objectivo do presente estudo é contribuir para a determinação do grau de influência dos factores psicossociais na adesão à terapia oclusiva por parte dos pais de crianças amblíopes e avaliar se existem diferenças significativas entre as recomendações do Ortoptista, a percepção parental dessas mesmas recomendações e o comportamento descrito. Metodologia - Foi efectuado um estudo quantitativo transversal, no qual participaram pais de crianças amblíopes (n=100), a realizar tratamento oclusivo num hospital público e numa clínica privada em Lisboa. Os pais responderam a um questionário baseado na Teoria da Motivação e Protecção (TMP) de Rogers, no qual foram analisadas variáveis parentais como a gravidade, vulnerabilidade, auto-eficácia, intenções de comportamento, eficácia da resposta e barreiras ao tratamento. Adicionalmente, foram analisadas as variáveis percepção parental do número de horas de oclusão e comportamento parental descrito. Resultados - Os resultados apontam para uma percentagem de 72% de adesão parental ao tratamento oclusivo e uma percentagem de 28% de não adesão. As variáveis intenções de comportamento (p=O,Ol 5) e eficácia da resposta (p=O,Ol 1) demonstraram ser significativas na predição da adesão parental ao tratamento oclusivo em crianças amblíopes (a=0,05). Foi detectada uma correlação positiva moderada (kappa=0, 536) entre o número de horas de oclusão recomendado pelo Ortoptista e a percepção parental dessas mesmas recomendações e uma correlação positiva forte (kappa=0,700) entre o número de horas de oclusão percepcionadas e o comportamento descrito. Conclusões - A prévia noção por parte dos pais de que o tratamento é uma mais-valia com consequências benéficas, provoca o desenvolvimento de uma resposta adaptativa de coping, neste caso de adesão ao tratamento oclusivo. A intenção positiva dos pais para realizar o tratamento e a prévia noção da sua eficácia na melhoria da acuidade visual da criança são preditivas da adesão por parte destes. Nesse sentido a probabilidade da adesão ao tratamento será maior se os pais associarem a adopção do comportamento recomendado à melhoria do estado de saúde das crianças, o que de facto foi demonstrado por esta investigação.

Implicações da supervisão de estágios no processo de (auto)formação dos professores cooperantes

O estudo visa perceber que implicações, ao nível dos processos de autoformação dos professores cooperantes, pode ter a presença de professores estagiários na sala de aula; verificar, por outro lado, no decurso da prática supervisiva, quais os aspectos do sistema de supervisão que têm mais implicações na atitude reflexiva dos professores cooperantes e que aspectos da organização dos estágios contribuem para a reflexão e mudança das suas práticas. Recorreuse a um vasto referencial teórico de autores que tratam do pensamento, da teoria e da prática reflexiva, da reflexão na acção e sobre a acção, da supervisão pedagógica e utilizou-se como suporte para a secção da análise e interpretação dos resultados a teoria de Dewey, Nóvoa, Perrenoud, entre outros. Na metodologia recorreu-se ao paradigma qualitativo, utilizando-se como estratégia a entrevista semi-estruturada aplicada numa primeira fase individualmente a cinco professores cooperantes e uma professora tutora e posteriormente uma entrevista colectiva de aprofundamento (“focus group”) a todos os professores cooperantes. Os dados apontam para o facto de a formação contínua de professores, a partir do exercício de supervisão, constituir um excelente momento para o treino da prática reflexiva. Esta prática reflexiva é baseada na revisão e no aprofundamento de conhecimentos resultante da introdução de novos elementos na sala de aula, reuniões, seminários, debate de ideias e práticas, atitudes e questionamento, visão crítica e mutabilidade dos processos e procedimentos de aprendizagem.

Mantle source heterogeneity, magma generation and magmatic evolution at Terceira Island (Azoresarchipelago): Constraints from elemental and isotopic (Sr, Nd, Hf, and Pb) data

This work addresses the present-day (<100 ka) mantle heterogeneity in the Azores region through the study of two active volcanic systems from Terceira Island. Our study shows that mantle heterogeneities are detectable even when "coeval" volcanic systems (Santa Barbara and Fissural) erupted less than 10 km away. These volcanic systems, respectively, reflect the influence of the Terceira and D. Joao de Castro Bank end-members defined by Beier et at (2008) for the Terceira Rift Santa Barbara magmas are interpreted to be the result of mixing between a HIMU-type component, carried to the upper mantle by the Azores plume, and the regional depleted MORB magmas/source. Fissural lavas are characterized by higher Ba/Nb and Nb/U ratios and less radiogenic Pb-206/Pb-204, Nd-143/Nd-144 and Hf-176/Hf-177, requiring the small contribution of delaminated sub-continental lithospheric mantle residing in the upper mantle. Published noble gas data on lavas from both volcanic systems also indicate the presence of a relatively undegassed component, which is interpreted as inherited from a lower mantle reservoir sampled by the ascending Azores plume. As inferred from trace and major elements, melting began in the garnet stability field, while magma extraction occurred within the spinel zone. The intra-volcanic system's chemical heterogeneity is mainly explained by variable proportions of the above-mentioned local end-members and by crystal fractionation processes. (C) 2011 Elsevier By. All rights reserved.

Detection of FRET signals with a wavelength sensitive device based on a-SiC:H

Glucose sensing is an issue with great interest in medical and biological applications. One possible approach to glucose detection takes advantage of measuring changes in fluorescence resonance energy transfer (FRET) between a fluorescent donor and an acceptor within a protein which undergoes glucose-induced changes in conformation. This demands the detection of fluorescent signals in the visible spectrum. In this paper we analyzed the emission spectrum obtained from fluorescent labels attached to a protein which changes its conformation in the presence of glucose using a commercial spectrofluorometer. Different glucose nanosensors were used to measure the output spectra with fluorescent signals located at the cyan and yellow bands of the spectrum. A new device is presented based on multilayered a-SiC:H heterostructures to detect identical transient visible signals. The transducer consists of a p-i'(a-SiC:H)-n/p-i(a-Si:H)-n heterostructure optimized for the detection of the fluorescence resonance energy transfer between fluorophores with excitation in the violet (400 nm) and emissions in the cyan (470 nm) and yellow (588 nm) range of the spectrum. Results show that the device photocurrent signal measured under reverse bias and using appropriate steady state optical bias, allows the separate detection of the cyan and yellow fluorescence signals. (C) 2013 Elsevier B.V. All rights reserved.

Monte Carlo simulation of the basic features of the GE Millennium MG single photon emission computed tomography gamma camera

Objective - To describe and validate the simulation of the basic features of GE Millennium MG gamma camera using the GATE Monte Carlo platform. Material and methods - Crystal size and thickness, parallel-hole collimation and a realistic energy acquisition window were simulated in the GATE platform. GATE results were compared to experimental data in the following imaging conditions: a point source of 99mTc at different positions during static imaging and tomographic acquisitions using two different energy windows. The accuracy between the events expected and detected by simulation was obtained with the Mann–Whitney–Wilcoxon test. Comparisons were made regarding the measurement of sensitivity and spatial resolution, static and tomographic. Simulated and experimental spatial resolutions for tomographic data were compared with the Kruskal–Wallis test to assess simulation accuracy for this parameter. Results - There was good agreement between simulated and experimental data. The number of decays expected when compared with the number of decays registered, showed small deviation (≤0.007%). The sensitivity comparisons between static acquisitions for different distances from source to collimator (1, 5, 10, 20, 30cm) with energy windows of 126–154 keV and 130–158 keV showed differences of 4.4%, 5.5%, 4.2%, 5.5%, 4.5% and 5.4%, 6.3%, 6.3%, 5.8%, 5.3%, respectively. For the tomographic acquisitions, the mean differences were 7.5% and 9.8% for the energy window 126–154 keV and 130–158 keV. Comparison of simulated and experimental spatial resolutions for tomographic data showed no statistically significant differences with 95% confidence interval. Conclusions - Adequate simulation of the system basic features using GATE Monte Carlo simulation platform was achieved and validated.

Demixing instability in coil-rod blends undergoing polycondensation reactions

The authors extend their earlier work on the stability of a reacting binary polymer blend with respect to demixing [D. J. Read, Macromolecules 31, 899 (1998); P. I. C. Teixeira , Macromolecules 33, 387 (2000)] to the case where one of the polymers is rod-like and may order nematically. As before, the authors combine the random phase approximation for the free energy with a Markov chain model for the chemistry to obtain the spinodal as a function of the relevant degrees of reaction. These are then calculated by assuming a simple second-order chemical kinetics. Results are presented, for linear systems, which illustrate the effects of varying the proportion of coils and rods, their relative sizes, and the strength of the nematic interaction between the rods. (c) 2007 American Institute of Physics.

SiC pinpin photonic for linking the visible spectrum to the telecom gap

Expanding far beyond traditional applications at telecommunications wavelengths, the SiC photonic devices has recently proven its merits for working with visible range optical signals. Reconfigurable wavelength selectors are essential sub-systems for implementing reconfigurable WDM networks and optical signal processing. Visible range to telecom band spectral translation in SiC/Si can be accomplished using wavelength selector under appropriated optical bias, acting as reconfigurable active filters. In this paper we present a monolithically integrated wavelength selector based on a multilayer SiC/Si integrated optical filters that requires optical switches to select wavelengths. The selector filter is realized by using double pin/pin a-SiC:H photodetector with front and back biased optical gating elements. Red, green, blue and violet communication channels are transmitted together, each one with a specific bit sequence. The combined optical signal is analyzed by reading out the generated photocurrent, under different background wavelengths applied either from the front or the back side. The backgrounds acts as channel selectors that selects one or more channels by splitting portions of the input multi-channel optical signals across the front and back photodiodes. The transfer characteristics effects due to changes in steady state light, irradiation side and frequency are presented. The relationship between the optical inputs and the digital output levels is established. (C) 2014 Elsevier B.V. All rights reserved.

Design optimization of cruciform specimens for biaxial fatigue loading

In order to correctly assess the biaxial fatigue material properties one must experimentally test different load conditions and stress levels. With the rise of new in-plane biaxial fatigue testing machines, using smaller and more efficient electrical motors, instead of the conventional hydraulic machines, it is necessary to reduce the specimen size and to ensure that the specimen geometry is appropriated for the load capacity installed. At the present time there are no standard specimen’s geometries and the indications on literature how to design an efficient test specimen are insufficient. The main goal of this paper is to present the methodology on how to obtain an optimal cruciform specimen geometry, with thickness reduction in the gauge area, appropriated for fatigue crack initiation, as a function of the base material sheet thickness used to build the specimen. The geometry is optimized for maximum stress using several parameters, ensuring that in the gauge area the stress is uniform and maximum with two limit phase shift loading conditions. Therefore the fatigue damage will always initiate on the center of the specimen, avoiding failure outside this region. Using the Renard Series of preferred numbers for the base material sheet thickness as a reference, the reaming geometry parameters are optimized using a derivative-free methodology, called direct multi search (DMS) method. The final optimal geometry as a function of the base material sheet thickness is proposed, as a guide line for cruciform specimens design, and as a possible contribution for a future standard on in-plane biaxial fatigue tests. © 2014, Gruppo Italiano Frattura. All rights reserved.

Desenho universal para a aprendizagem: construindo práticas pedagógicas inclusivas

O presente artigo tem como objetivo apresentar uma grelha de planificação da intervenção facilitadora do desenvolvimento de práticas pedagógicas inclusivas. Para o efeito, procedeu-se a uma revisão da literatura centrada nos conceitos de Educação Inclusiva e de Desenho Universal para a Aprendizagem (Universal Design for Learning), a qual permitiu identificar e fundamentar a pertinência das dimensões a considerar na planificação da intervenção pedagógica, de modo a assegurar o acesso, a participação e o sucesso de todos os alunos. Com a apresentação da grelha de planificação da intervenção pedagógica pretende-se, em última análise, sublinhar a necessidade e a importância de desenvolver processos de planificação que disponibilizem formas diversificadas de motivação e envolvimento dos alunos, que equacionem múltiplos processos de apresentação dos conteúdos a aprender e, por último, que possibilitem a utilização de diversas formas de ação e expressão por parte dos alunos.

Two-loop stability of a complex singlet extended Standard Model

Motivated by the dark matter and the baryon asymmetry problems, we analyze a complex singlet extension of the Standard Model with a Z(2) symmetry (which provides a dark matter candidate). After a detailed two-loop calculation of the renormalization group equations for the new scalar sector, we study the radiative stability of the model up to a high energy scale (with the constraint that the 126 GeV Higgs boson found at the LHC is in the spectrum) and find it requires the existence of a new scalar state mixing with the Higgs with a mass larger than 140 GeV. This bound is not very sensitive to the cutoff scale as long as the latter is larger than 10(10) GeV. We then include all experimental and observational constraints/measurements from collider data, from dark matter direct detection experiments, and from the Planck satellite and in addition force stability at least up to the grand unified theory scale, to find that the lower bound is raised to about 170 GeV, while the dark matter particle must be heavier than about 50 GeV.