Fungal contamination in swine: a potential occupational health threat

Poor air quality in a pig-confinement building may potentially place farmers at higher health risk than other workers for exposure to airborne pollutants that may reach infectious levels. The aim of this study was to assess worker exposure to fungi in indoor environments in Portuguese swine buildings. Air samples from 7 swine farms were collected at a flow rate of 140 L/min, at 1 m height, onto malt extract agar supplemented with chloramphenicol (MEA). Surfaces samples of the same indoor sites were obtained by swabbing the surfaces. Samples from the floor covering were also collected from four of seven swine farms. All collected samples were incubated at 27°C for 5-7 days. After lab processing and incubation of obtained samples, quantitative colony-forming units (CFU)/m(3), CFU/cm(2), and CFU/g and qualitative results were determined with identification of isolated fungal species. Aspergillus versicolor was the most frequent species found in air (21%), followed by Scopulariopsis brevicaulis (17%) and Penicillium sp. (14%). Aspergillus versicolor was also the most frequent species noted on surfaces (26.6%), followed by Cladosporium sp. (22.4%) and Scopulariopsis brevicaulis (17.5%). Chrysosporium was the most frequently found genera in the new floor covering (38.5%), while Mucor was the most prevalent genera (25.1%) in used floor covering. Our findings corroborate a potential occupational health threat due to fungi exposure and suggest the need for a preventive strategy.

Possible respiratory infection due to Aspergillus in workers from swineries and poultries

Recent epidemiologic studies clearly outline the link between fungal sensibilization and exarcebations of asthma, leading to increased morbidity and mortality. Amongst the filamentous fungi, Aspergillus scpecies have been strongly linked with exarcebations of asthma and other respiratory allergic diseases. Particles of approximately 1 to 4 pm are deposited in the lower respiratory tract. Therefore, conidia of A. fumigatus are small enough to traverse the terminal respiratory airways and reach the pulmonary alveoli, whereas the larger conidia of some other Aspergillus species, such as A. flavus and A. niger, tend to be deposited in the paranasal sinuses and upper airways. Exposute to environmental fungal spores has been associated with worsening asthma symptoms, lung function, hospital admissions and asthma-related deaths.

Otimização do co-registo metabolismo-morfologia em estudos de PET/CT com 18F-DG de nódulos pulmonares: comparação de dois protocolos - 4D vs CT lento

Mestrado em Medicina Nuclear - Área de especialização: Tomografia por Emissão de Positrões.

Caracterização profissional e grau de satisfação dos licenciados em fisioterapia da Escola Superior de Tecnologia da Saúde de Lisboa

Mestrado em Fisioterapia.

Real-time rheology of actively growing bacteria

The population growth of a Staphylococcus aureus culture, an active colloidal system of spherical cells, was followed by rheological measurements, under steady-state and oscillatory shear flows. We observed a rich viscoelastic behavior as a consequence of the bacteria activity, namely, of their multiplication and density-dependent aggregation properties. In the early stages of growth (lag and exponential phases), the viscosity increases by about a factor of 20, presenting several drops and full recoveries. This allows us to evoke the existence of a percolation phenomenon. Remarkably, as the bacteria reach their late phase of development, in which the population stabilizes, the viscosity returns close to its initial value. Most probably, this is caused by a change in the bacteria physiological activity and in particular, by the decrease of their adhesion properties. The viscous and elastic moduli exhibit power-law behaviors compatible with the "soft glassy materials" model, whose exponents are dependent on the bacteria growth stage. DOI: 10.1103/PhysRevE.87.030701.

O uso de palmilhas de contato total e o impacte nas alterações posturais no trabalho em ortostatismo

Mestrado em Higiene e Segurança no Trabalho

Concepções dos professores face à inclusão de alunos com NEE no ensino regular

Dissertação apresentada à Escola Superior de Educação de Lisboa para a obtenção de grau de mestre em Ciências da Educação -Especialidade Educação Especial

Design and performance of a novel low-density parity-check code for distributed video coding

Low-density parity-check (LDPC) codes are nowadays one of the hottest topics in coding theory, notably due to their advantages in terms of bit error rate performance and low complexity. In order to exploit the potential of the Wyner-Ziv coding paradigm, practical distributed video coding (DVC) schemes should use powerful error correcting codes with near-capacity performance. In this paper, new ways to design LDPC codes for the DVC paradigm are proposed and studied. The new LDPC solutions rely on merging parity-check nodes, which corresponds to reduce the number of rows in the parity-check matrix. This allows to change gracefully the compression ratio of the source (DCT coefficient bitplane) according to the correlation between the original and the side information. The proposed LDPC codes reach a good performance for a wide range of source correlations and achieve a better RD performance when compared to the popular turbo codes.

The effect of the angle of incidence on the aqueous corrosion of ion implanted M50 steel substrates

Following work on tantalum and chromium implanted flat M50 steel substrates, this work reports on the electrochemical behaviour of M50 steel implanted with tantalum and chromium and the effect of the angle of incidence. Proposed optimum doses for resistance to chloride attack were based on the interpretation of results obtained during long-term and accelerated electrochemical testing. After dose optimization from the corrosion viewpoint, substrates were implanted at different angles of incidence (15°, 30°, 45°, 60°, 75°, 90°) and their susceptibility to localized corrosion assessed using open-circuit measurements, step by step polarization and cyclic voltammetry at several scan rates (5–50 mV s-1). Results showed, for tantalum implanted samples, an ennoblement of the pitting potential of approximately 0.5 V for an angle of incidence of 90°. A retained dose of 5 × 1016 atoms cm-2 was found by depth profiling with Rutherford backscattering spectrometry. The retained dose decreases rapidly with angle of incidence. The breakdown potential varies roughly linearly with the angle of incidence up to 30° falling fast to reach -0.1 V (vs. a saturated calomel electrode (SCE)) for 15°. Chromium was found to behave differently. Maximum corrosion resistance was found for angles of 45°–60° according to current densities and breakdown potentials. Cr+ depth profiles ((p,γ) resonance broadening method), showed that retained doses up to an angle of 60° did not change much from the implanted dose at 90°, 2 × 1017 Cr atoms cm-2. The retained implantation dose for tantalum and chromium was found to follow a (cos θ)8/3 dependence where θ is the angle between the sample normal and the beam direction.

Convergência para NZEB de um edifício classificado

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Edificações

Meios de comunicação como instrumentos de inserção da comunidade cabo-verdiana na sociedade de acolhimento: o caso da área metropolitana de Lisboa

Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Jornalismo.

O casamento real de William e Kate : a cobertura jornalística nos jornais The Daily Mail, The Guardian e The Sun

Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Jornalismo.

Personatv

Trabalho de projeto apresentado à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Jornalismo.

Sobrevivência: jogo interactivo para estudo de arquitecturas de agentes autónomos

Trabalho de projeto para obtenção do grau de Mestre em Engenharia Informática e de Computadores

Comunicação da marca Wines of Portugal: um estudo de caso

As perspectivas de um mercado cada vez mais global, impostas pela intensificação da concorrência, aumento da competitividade e surgimento de economias de escala, têm desafiado os países a construírem identidades nacionais cada vez mais fortes e diferenciadoras, procurando alcançar uma vantagem competitiva que permita, não só um desempenho positivo nas relações comerciais, mas, igualmente, a valorização dos produtos nos mercados internacionais. Procura-se com o presente trabalho analisar o modo como Portugal se tem vindo a posicionar no panorama internacional, no âmbito do sector vitivinícola. Este é um sector que tem vindo a dar provas do seu forte potencial estratégico e, com recurso à construção da marca Wines of Portugal, os vinhos portugueses usufruem, actualmente, de mecanismos para a expressão da sua identidade nos mercados externos, permitindo um reforço do seu posicionamento estratégico. As noções de “marca país” e “comunicação institucional” surgem como ponto de partida para a análise do plano de comunicação proposto pela ViniPortugal para a marca Wines of Portugal, procurando compreender quais os contributos das relações públicas na construção e expressão da identidade dos vinhos portugueses num contexto internacional.