Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

Effect of the Impact Conditions on the Mechanical Properties of Injection-Molded Parts

This work focused on the study of the impact event on molded parts in the framework of automotive components. The influence of the impact conditions and processing parameters on the mechanical behavior of talc-filled polypropylene specimens was analyzed. The specimens were lateral-gate discs produced by injection molding, and the mechanical characterization was performed through instrumented falling weight impact tests concomitantly assisted with high-speed videography. Results analyzed using the analysis of variance (ANOVA) method have shown that from the considered parameters, only the dart diameter and test temperature have significant influence on the falling weight impact properties. Higher dart diameter leads to higher peak force and peak energy results. Conversely, higher levels of test temperatures lead to lower values of peak force and peak energy. By means of high-speed videography, a more brittle fracture was observed for experiments with higher levels of test velocity and dart diameter and lower levels of test temperature. The injection-molding process conditions assessed in this study have an influence on the impact response of moldings, mainly on the deformation capabilities of the moldings.

The determinants of international equity and bond investment

The purpose of this research is fourfold. First, to investigate whether the determinants of international equity investment differ between investors with different degrees of information, experience and sophistication. For this purpose, the determinants of international equity investment of institutional and noninstitutional investors from 20 OECD countries, in the period 2001-2009, were analysed and compared. The results show that there are significant differences in the determinants of international equity investment between institutional and noninstitutional investors. Particularly, noninstitutional investors exhibit a more pronounced preference for equities of geographical nearby, contiguous and more transparent countries than institutional investors, suggesting that the effect of information costs and familiarity on international equity investment is stronger for less informed, experienced and sophisticated investors. Moreover, the preference for more developed equity markets and the contrarian behaviour are more severe for noninstitutional investors. Hence, the heterogeneity of institutional and noninstitutional investors in international equity investment is not negligible and therefore should be taken into account. Second, to investigate whether the determinants of international bond investment differ between investors with different degrees of information, experience and sophistication. For this purpose, the determinants of international bond investment of institutional and noninstitutional investors from 20 OECD countries, in the period 2001-2009, were analysed and compared. The results show that there are few significant differences in the determinants of international bond investment between institutional and noninstitutional investors. Particularly, the preference for bonds of more transparent countries and the return chasing behaviour are more pronounced for noninstitutional investors, whereas the preference for bonds with lower risk diversification potential is more pronounced for institutional investors. Hence, not only the results for international bond investment do not allow to support (or reject) the argument that information costs and familiarity are more important for less informed, experienced and sophisticated investors, but also they are contrary to the idea that financial variables, namely return and risk diversification, are more important for more informed, experienced and sophisticated investors. Third, to investigate whether the determinants of international equity investment differ from the determinants of international bond investment. For this purpose, the determinants of both international equity and bond investment of institutional and noninstitutional investors from 20 OECD countries, in the period 2001-2009, were analysed and compared. The results show that, although the effect of information costs on international equity investment tends to be stronger than on international bond investment, the differences between assets are not usually statistically significant, especially when the influence of financial variables is taken into account. Hence, it is not possible to conclude that international equity investment is much more information intensive than international bond investment, as suggested by Gehrig (1993) and Portes, Rey and Oh (2001), among others. Fourth, to investigate whether the flight to quality phenomenon is also observable in international investment and whether the flight to quality phenomenon is more pronounced for more sophisticated than for less sophisticated investors. For this purpose, a two-factor and three-factor ANOVA models, respectively, were applied to the international equity and bond investment of institutional and noninstitutional investors from 20 OECD countries in the period 2001-2009. The results suggest that the flight to quality phenomenon is also observable in international investment, as a change from business cycle of expansion to recession causes investors to significantly decrease the average weight invested in more risky assets (equities) and increase the average weight invested in less risky assets (bonds). The results also show that the variation on the average weight assigned to each type of asset, due to changes in business cycles, is significantly stronger for institutional investors than for noninstitutional investors, thereby suggesting that the flight to quality phenomenon is more pronounced for more sophisticated than for less sophisticated investors.

Assessment of Laparoscopic Skills Performance: 2D Versus 3D Vision and Classic Instrument Versus New Hand-Held Robotic Device for Laparoscopy

Introduction and Objectives. Laparoscopic surgery has undeniable advantages, such as reduced postoperative pain, smaller incisions, and faster recovery. However, to improve surgeons’ performance, ergonomic adaptations of the laparoscopic instruments and introduction of robotic technology are needed. The aim of this study was to ascertain the influence of a new hand-held robotic device for laparoscopy (HHRDL) and 3D vision on laparoscopic skills performance of 2 different groups, naïve and expert. Materials and Methods. Each participant performed 3 laparoscopic tasks—Peg transfer, Wire chaser, Knot—in 4 different ways. With random sequencing we assigned the execution order of the tasks based on the first type of visualization and laparoscopic instrument. Time to complete each laparoscopic task was recorded and analyzed with one-way analysis of variance. Results. Eleven experts and 15 naïve participants were included. Three-dimensional video helps the naïve group to get better performance in Peg transfer, Wire chaser 2 hands, and Knot; the new device improved the execution of all laparoscopic tasks (P < .05). For expert group, the 3D video system benefited them in Peg transfer and Wire chaser 1 hand, and the robotic device in Peg transfer, Wire chaser 1 hand, and Wire chaser 2 hands (P < .05). Conclusion. The HHRDL helps the execution of difficult laparoscopic tasks, such as Knot, in the naïve group. Three-dimensional vision makes the laparoscopic performance of the participants without laparoscopic experience easier, unlike those with experience in laparoscopic procedures.