Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

«Corruption» and social and economic criminal law: criminology, criminal policy, political science and law&economics - a new idea about criminal liability of legal entities

Abstract: If we think there is a significant number of legal offshore in the globalized world, then there is not even a global consensus about what «corruption» is. The «illegal corruption» in a country may be legal in another. Moreover, the great global corruption is above the law or above democratic States. And not all democratic States are «Rule of Law». Therefore, the solution is global earlier in time and space law, democratic, free and true law. While the human being does not reach a consensus of what «corruption» really is, the discussion will not go further than a caricature. One of the other problems about «corruption» is that it is very difficult to establish the imputation of crimes, including «corruption» (v.g. Portugal) on some «companies», corporations. We have a juridical problem in the composition of the art. 11. of the Portuguese Penal Code.

Certification and integration of environment with quality and safety – a path to sustained success

According to Wright [1] certification of products and processes began during the 1960’s in the manufacturing industry, as a tool to control and assure the quality/conformity of products and services provided by suppliers to customers/consumers. Thus, the series of ISO 9000 was published first time, in 1987 and it was been created with a flexible character, to be reviewed periodically. Later, were published others normative references, which highlight the ISO 14001 in 1996 and OHSAS 18001 in 1999. This was also, the natural sequence of the certification processes in the organizations, i.e., began with the certification of quality management systems (QMS) followed by the environmental management systems (EMS) and after for the Occupational Health and Safety Management System (OHSMS). Hence, a high percentage of organizations with an EMS, in accordance with the ISO 14001, had also implemented, a certified QMS, in accordance with ISO 9001. At first the implementation of a QMS was particularly relevant in high demanding activity sectors, like the automotive and aeronautical industries, but it has rapidly extended to every activity sector, becoming a common requisite of any company worldwide and a factor of competitiveness and survival. Due to the increasingly demanding environmental legislation in developed countries, companies nowadays are required to seriously take into consideration not only environmental aspects associated to the production chain itself, but also to the life cycle of their products.

A generic model for integration of Quality, Environment and Safety Management Systems

Purpose – The purpose of this paper is to propose a generic model of Integrated Management System of Quality, Environment and Safety (IMS-QES) that can be adapted and progressively to assimilate various Management Systems, of which highlights: ISO 9001 for Quality; ISO 14001 for Environment; OHSAS 18001 for Occupational Health and Safety. Design/methodology/approach – The model was designed in the real environment of a Portuguese Organization and 160 employees were surveyed. The rate response was equal to 86 percent. The conceived model was implemented in a first phase for the integration of Quality, Environment and Safety Management Systems. Findings – Among the main findings of the survey the paper highlights: the elimination of conflicts between individual systems with resources optimization; creation of added value to the business by eliminating several types of wastes; the integrated management of sustainability components in a global market; the improvement of partnerships with suppliers of goods and services; reducing the number of internal and external audits. Originality/value – This case study is one of the first Portuguese empirical researches about IMS-QES and the paper believes that it can be useful in the creation of a Portuguese guideline for integration, namely the Quality Management Systems; Environmental Management Systems and Occupational Health and Safety Management Systems among others.

Developments regarding the integration of the occupational safety and health with quality and environment management systems

Nanotechnology is the manipulation of matter on na almost atomic scale to produce new structures, materials, and devices. As potential occupational exposure to nanomaterials (NMs) becomes more prevalente, it is importante that the principles of medical surveillance and risk management be considered for workers in the nanotechnology industry.However, much information about health risk is beyond our current knowledge. Thus, NMs presente new challenges to understanding, predicting, andmanageing potential health risks. First, we briefly describe some general features of NMs and list the most importante types of NMs. This review discusses the toxicological potential of NMs by comparing possible injury mechanism and know, or potentially adverse, health effects. We review the limited research to date for occupational exposure to these particles and how a worker might be exposed to NMs. The principles of medical surveillance are reviewed to further the discussion of occupational health surveillance are reviewed to further the discussion of occupational health surveillance for workers exposed to NMs. We outlinehow occupational health professionals could contribute to a better knowledge of health effects by the utilization of a health surveillance program and by minimizing exposure. Finally, we discuss the early steps towards regulation and the difficulties facing regulators in controlling potentially harmful exposures in the absence of suficiente scientific evidence.

Integration of risk management in occupational health and safety systems

Risk management can be considered as part of the Occupational Health and Safety System (OHS) of an organization and can be used to develop and implement the OHS policy and manage the associated risks. The success of the integration of risk management in OHS depends on both technical and human aspects. Thus, this paper presents and discusses the case of a company working in the area of solid waste treatment. This company was certified in 2009 with an Integrated Management Systems for Quality, Environment, Occupational Health and Safety. The evolution of accidents before and after the implementation of the integrated system was analysed and a questionnaire was used to capture the perceptions of the technicians on the risk management system. The analysis of the findings showed that the frequency of accidents increased since 2009 but the severity has been reduced. Several interrelated causes and consequences were analysed and discussed. Furthermore, the analysis of the opinions of the company’s technicians permitted to highlight some important aspects on the integration of risk management in the OHS system of the company. In line with this discussion some hypothesis have been formulated.

Anotação sintética, numa perspectiva de Direito Público-penal e Direito Privado-civil, ao Acórdão do Supremo Tribunal de Justiça Português, de 19 de Abril de 2012-- A poluição sonora e o direito humano ao descanso e à saúde, sem descurar a necessidade duma adequada política tributária.

Resumo: 1 – Sumário do Acórdão do Supremo Tribunal de Justiça, de 19 de Abril de 2012; 2 – Texto completo do Acórdão do Supremo Tribunal de Justiça, de 19 de Abril de 2012: cfr. http://www.dgsi.pt/jstj.nsf/954f0ce6ad9dd8b980256b5f003fa814/fc664c231f3e73cf802579ea003d91d2?OpenDocument&Highlight=0,polui%C3%A7%C3%A3o , 2 de Junho de 2012; 3 – Anotação sintética; 3.1 – Introdução à anotação sintética e suas características neste caso concreto; 4 – Algumas referências constitucionais centrais em relação a Direitos humanos e, nomeadamente, a um Direito humano a um meio-ambiente sadio, saudável em todas as suas vertentes e sentidos – o exemplo central do artigo 9.º da CRP; 4.1 – Algumas referências constitucionais centrais em relação a Direitos humanos e, nomeadamente, a um Direito humano a um meio-ambiente sadio, saudável em todas as suas vertentes e sentidos – o exemplo central do artigo 66.º da CRP e o Regime Geral do Ruído; 5 – O direito humano ao descanso e à saúde, rectius o direito ao ambiente sadio vs o direito ao lazer e/ou exploração económica de indústrias de diversão, rectius o direito à liberdade de iniciativa económica privada; 6 – A violação do direito humano, de personalidade, ao descanso e à saúde, rectius o direito a um ambiente sadio, numa perspectiva de Direito privado e Direito civil; 7 – A criminalização da poluição, designadamente a criminalização da poluição sonora – uma perspectiva de Direito público e Direito penal; 8 - A necessidade duma adequada política tributária que compatibilize desenvolvimento sustentado com a protecção dum meio ambiente sadio e com qualidade de vida; 9 – Conclusões. § Abstract: 1 - Summary of the Judgment of the Supreme Court of April 19, 2012, 2 - Complete text of the Judgment of the Supreme Court of April 19, 2012: cf. http://www.dgsi.pt/jstj.nsf/954f0ce6ad9dd8b980256b5f003fa814/fc664c231f3e73cf802579ea003d91d2?OpenDocument&Highlight=0,polui%C3%A7%C3%A3o , June 2, 2012, 3 - Synthetic Note: 3.1 - Introduction to synthetic annotation and its characteristics in this case 4 - Some references constitutional power over human rights and in particular to a human right to a healthy environment, healthy in all its forms and meanings - the central example of Article 9. of CRP; 4.1 - Some references constitutional power over human rights and in particular to a human right to a healthy environment, healthy in all its forms and meanings - the central example of Article 66. No of CRP and the General Noise; 5 - the human right to rest and health, rectius the right to healthy environment vs. the right to leisure and / or economic exploitation of industries fun, rectius the right to freedom of private economic initiative; 6 - the violation of human personality, to rest and health, rectius the right to a healthy environment, a perspective of private law and civil law; 7 - criminalization of pollution, including the criminalization of noise - a perspective of public law and criminal law; 8 - the need for appropriate tax policy that reconciles sustainable development with the protection of a healthy environment and quality of life; 9 - Conclusions.

The use of quantitative performance information by local elected politicians in top managers’ performance evaluation: case studies

This paper studies the use of results oriented performance information (outputs and outcomes) by local elected politicians (aldermen) in top managers’ performance evaluation. The main goal is to understand the top managers’ performance evaluation process conducted by Portuguese aldermen and to identify the dominant evaluation style. In line with Bogt (2001), an exploratory field research was developed in three large municipalities: Porto, Braga and Matosinhos. We intend to answer the following research questions: to what extent are local politicians (aldermen) 1 using results information (about outputs and outcomes) to evaluate top managers’ performance? Do aldermen give any importance to quantitative output information and report them on current planning and control documents? Will the output performance information be used on performance evaluation in a different way concerning policy field (task orientation)? Based on the Hopwood evaluation styles (adapted from the private to the public sector by Bogt, 2001), we have found that the performance evaluation process of top managers is more featured by the ‘operations-conscious styles’ (or ‘implicit style’). Portuguese aldermen recognize the importance to quantify outputs and outcomes, but these days they focus on the information about activities and the realized operations when they evaluate performance. We haven´t found significant differences between different tasks (some exceptions for culture and environment areas). However, the municipality of Matosinhos paid more attention on quantitative performance information. This finding is reinforced by the quality of quantitative data on outputs reported on its management report. Generally speaking, aldermen are aware that more attention should be paid to quantitative information about results and performance, taking into account recent reforms introduced in Portuguese municipalities (PLG) on this field, but the ‘implicit’ style is dominant.