Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

Effect of the Impact Conditions on the Mechanical Properties of Injection-Molded Parts

This work focused on the study of the impact event on molded parts in the framework of automotive components. The influence of the impact conditions and processing parameters on the mechanical behavior of talc-filled polypropylene specimens was analyzed. The specimens were lateral-gate discs produced by injection molding, and the mechanical characterization was performed through instrumented falling weight impact tests concomitantly assisted with high-speed videography. Results analyzed using the analysis of variance (ANOVA) method have shown that from the considered parameters, only the dart diameter and test temperature have significant influence on the falling weight impact properties. Higher dart diameter leads to higher peak force and peak energy results. Conversely, higher levels of test temperatures lead to lower values of peak force and peak energy. By means of high-speed videography, a more brittle fracture was observed for experiments with higher levels of test velocity and dart diameter and lower levels of test temperature. The injection-molding process conditions assessed in this study have an influence on the impact response of moldings, mainly on the deformation capabilities of the moldings.

"Procedural Strategy" by Carlos Pinto de Abreu, lawyer

Como Carlos Pinto de Abreu refere e bem, no seu livro e no seminário, entre juízes, partes ou sujeitos processuais, advogados ou solicitadores, magistrados do Ministério Público ou testemunhas, peritos ou funcionários, encontramos “pessoas que podem ser mais ou menos sérias”, por sinal “motivadas por outros interesses que não os de servir a Verdade e a Justiça”; Abstract: Carlos Pinto de Abreu as regards and well in his book and seminar, between judges, parties or procedural subject, lawyers or solicitors, prosecutors and witnesses, experts or officials, found "people who may be more or less serious" , by the way "motivated by interests other than those serving the Truth and Justice".

Os Estaleiros Navais de Viana do Castelo e o Estado-de-Direito Social Democrático

...mas temos mais respeito ainda pela Liberdade, pelos Princípios Constitucionais como são a Presunção de Inocência e o Princípio da Legalidade Criminal ou o Princípio da Culpa, entre outras conquistas do Ser Humano ao longo de milénios. § Abstract: ... but we have more respect even for Freedom, the Constitutional Principles as are the Presumption of Innocence and the Principle of Criminal Legal or the Principle of Guilt, among other achievements of the human being over millennia.