Simulating scratch behavior of polymers with mesoscopic molecular dynamics

Part replacement and repair is needed in structures with moving parts because of scratchability and wear. In spite of some accumulation of experimental evidence, scratch resistance is still not well understood. We have applied molecular dynamics to study scratch resistance of amorphous polymeric materials through computer simulations. As a first approach, a coarse grain model was created for high density polyethylene at the mesoscale. We have also extended the traditional approach and used real units rather than reduced units (to our knowledge, for the first time), which enable an improved quantification of simulation results. The obtained results include analysis of penetration depth, residual depth and recovery percentage related to indenter force and size. Our results show there is a clear effect from these parameters on the tribological properties. We also discuss a "crooked smile" effect on the scratched surface and the reasons for its appearance.

Critical behavior of a three-dimensional hardcore-cylinder composite system

In this work the critical indices β, γ , and ν for a three-dimensional (3D) hardcore cylinder composite system with short-range interaction have been obtained. In contrast to the 2D stick system and the 3D hardcore cylinder system, the determined critical exponents do not belong to the same universality class as the lattice percolation,although they obey the common hyperscaling relation for a 3D system. It is observed that the value of the correlation length exponent is compatible with the predictions of the mean field theory. It is also shown that, by using the Alexander-Orbach conjuncture, the relation between the conductivity and the correlation length critical exponents has a typical value for a 3D lattice system.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

Mechanical Behavior of the Lamellar Structure in Semi-Crystalline Polymers

We have employed molecular dynamics simulations to study the behavior of virtual polymeric materials under an applied uniaxial tensile load. Through computer simulations, one can obtain experimentally inaccessible information about phenomena taking place at the molecular and microscopic levels. Not only can the global material response be monitored and characterized along time, but the response of macromolecular chains can be followed independently if desired. The computer-generated materials were created by emulating the step-wise polymerization, resulting in self-avoiding chains in 3D with controlled degree of orientation along a certain axis. These materials represent a simplified model of the lamellar structure of semi-crystalline polymers,being comprised of an amorphous region surrounded by two crystalline lamellar regions. For the simulations, a series of materials were created, varying i) the lamella thickness, ii) the amorphous region thickness, iii) the preferential chain orientation, and iv) the degree of packing of the amorphous region. Simulation results indicate that the lamella thickness has the strongest influence on the mechanical properties of the lamella-amorphous structure, which is in agreement with experimental data. The other morphological parameters also affect the mechanical response, but to a smaller degree. This research follows previous simulation work on the crack formation and propagation phenomena, deformation mechanisms at the nanoscale, and the influence of the loading conditions on the material response. Computer simulations can improve the fundamental understanding about the phenomena responsible for the behavior of polymeric materials, and will eventually lead to the design of knowledge-based materials with improved properties.

Modelling the Mechanical Behavior of Polymer-Based Nanocomposites

Molecular dynamics simulations were employed to analyze the mechanical properties of polymer-based nanocomposites with varying nanofiber network parameters. The study was focused on nanofiber aspect ratio, concentration and initial orientation. The reinforcing phase affects the behavior of the polymeric nanocomposite. Simulations have shown that the fiber concentration has a significant effect on the properties, with higher loadings resulting in higher stress levels and higher stiffness, matching the general behavior from experimental knowledge in this field. The results also indicate that, within the studied range, the observed effect of the aspect ratio and initial orientation is smaller than that of the concentration, and that these two parameters are interrelated.

Coupling Mechanical and Electrical Behavior in the Multi-scale Simulation of Polymer-based CNT Nanocomposites

A numeric model has been proposed to investigate the mechanical and electrical properties of a polymeric/carbon nanotube (CNT) composite material subjected to a deformation force. The reinforcing phase affects the behavior of the polymeric matrix and depends on the nanofiber aspect ratio and preferential orientation. The simulations show that the mechanical behavior of a computer generated material (CGM) depends on fiber length and initial orientation in the polymeric matrix. It is also shown how the conductivity of the polymer/CNT composite can be calculated for each time step of applied stress, effectively providing the ability to simulate and predict strain-dependent electrical behavior of CNT nanocomposites.

Contribution towards a reflection about methodological strategies in design education and the function of drawing in design

This work presents a reflection on Design education and specifically on the role of Drawing in this area. As a subject, Design has expanded its field of action expanding into new areas such as Experience Design or Service Design. It became necessary for the designer to have more than an education based on technological knowledge or know-how. Many authors like Meredith Davis, Don Norman or Jamie Hobson point out the urgency to review the curricula of Design courses because nowadays “… design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior” (Norman 2011). When shifting from a product-centered design to a person-centered design (in a structure, a service or in a relationship) what should the function of drawing in a design course be? What should its curriculum be? Our work methodology will be to confront today’s perspectives on design theory and practice in an attempt to add to the discussion on the methodological strategies in design teaching in the contemporary context.

Contributo para uma reflexão sobre estratégias metodológicas no ensino do Design e a função do Desenho em Design

Neste trabalho apresentaremos uma reflexão sobre o ensino do Design e, especificamente, sobre a função do Desenho nessa área disciplinar. O Design, enquanto disciplina, alargou a sua área de actuação diversificando-se em novos campos como o Design de Experiência ou o Design de Serviço, não bastando ao designer uma formação ligada ao conhecimento tecnológico, ou ao “saber-fazer”. Diversos autores, como Meredith Davis, Don Norman ou Jamie Hobson, alertam para a urgência de uma reflexão aprofundada sobre as estruturas curriculares dos cursos de Design, já que na actualidade “(…) design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior” (Norman, 2011). Na passagem de um design centrado na forma, para um design centrado na pessoa (numa estrutura, num serviço, ou numa relação) qual deverá ser a função do desenho num curso de design? Qual deverá ser a sua estrutura programática? Como metodologia de trabalho iremos confrontar perspectivas actuais da teoria e da prática do design que equacionam esta problemática procurando, deste modo, contribuir para a reflexão de estratégias metodológicas no ensino do design no contexto contemporâneo.

Contribution towards a reflection about methodological strategies in Design Education and the function of Drawing in Design

This work presents a reflection on Design education and specifically on the role of Drawing in this area. As a subject, Design has expanded its field of action expanding into new areas such as Experience Design or Service Design. It became necessary for the designer to have more than an education based on technological knowledge or know-how. Many authors like Meredith Davis, Don Norman or Jamie Hobson point out the urgency to review the curricula of Design courses because nowadays “ … design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior” (Norman, 2011) When shifting from a product-centered design to a person-centered design (in a structure, a service or in a relationship) what should the function of drawing in a design course be? What should its curriculum be? Our work methodology will be to confront today’s perspectives on design theory and practice in an attempt to add to the discussion on the methodological strategies in design teaching in the contemporary context.

Reflexão sobre estratégias metodológicas no ensino do design e a função do desenho em design

Neste trabalho apresentaremos uma reflexão sobre o ensino do Design e, especificamente, sobre a função do Desenho nessa área disciplinar. O Design, enquanto disciplina, alargou a sua área de actuação diversificando-se em novos campos como o Design de Experiência ou o Design de Serviço, não bastando ao designer uma formação ligada ao conhecimento tecnológico, ou ao “saber-fazer”. Diversos autores, como Meredith Davis, Don Norman ou Jamie Hobson, alertam para a urgência de uma reflexão aprofundada sobre as estruturas curriculares dos cursos de Design, já que na actualidade “(…) design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior” (Norman, 2011). Na passagem de um design centrado na forma, para um design centrado na pessoa (numa estrutura, num serviço, ou numa relação) qual deverá ser a função do desenho num curso de design? Qual deverá ser a sua estrutura programática? Como metodologia de trabalho iremos confrontar perspectivas actuais da teoria e da prática do design que equacionam esta problemática procurando, deste modo, contribuir para a reflexão de estratégias metodológicas no ensino do design no contexto contemporâneo.

Reflexão sobre Estratégias Metodológicas no Ensino do Design e a Função do Desenho em Design

Somos habitantes de um mundo que sofre constantes transformações estruturais em qualquer área. As tecnologias, a globalização e a política dos mercados, deslocam tudo e todos da sua zona de conforto, exigindo constantes adaptações a novos vocabulários e hábitos para os quais não temos antecedentes. Novas competências devem ser adquiridas face às novas exigências, e no ensino, base de uma preparação (pessoal e profissional), impõe-se uma constante revisão de estratégias metodológicas de aquisição e partilha de conhecimento. Neste trabalho apresentaremos uma reflexão sobre o ensino do Design e, especificamente, sobre a função do Desenho nessa área disciplinar. O Design, enquanto disciplina, alargou a sua área de actuação diversificando-se em novos campos como o Design de Experiência ou o Design de Serviço, não bastando ao designer uma formação ligada ao conhecimento tecnológico, ou ao “saber-fazer”. Diversos autores, como Meredith Davis, Don Norman ou Jamie Hobson, alertam para a urgência de uma reflexão aprofundada sobre as estruturas curriculares dos cursos de Design, já que na actualidade “(…) design is more than appearance, design is about interaction, about strategy and about services. Designers change social behavior.” Na passagem de um design centrado na forma, para um design centrado na pessoa (numa estrutura, num serviço, ou numa relação) qual deverá ser a função do desenho num curso de design? Qual deverá ser a sua estrutura programática? Como metodologia de trabalho iremos confrontar perspectivas actuais da teoria e da prática do design que equacionam esta problemática procurando, deste modo, contribuir para a reflexão de estratégias metodológicas no ensino do design no contexto contemporâneo.

Organizational and accounting change within the context of the environmental agenda: evidence from Portugal

Purpose – The purpose of this paper is to explore the process of organizational change undergone by a large Portuguese business group within the context of the environmental agenda and the role of accounting as a mechanism for change. Design/methodology/approach – The paper reports the results of a case study conducted between 2006 and 2009. Information was obtained from semi-structured interviews and secondary sources. Organizational changes were analyzed using Laughlin’s model in order to identify which category reflected most of the changes introduced to address environmental matters. Findings – This paper offers evidence that change is not a homogeneous phenomenon. Additionally, it confirms previous studies’ findings which found that accounting did not play a significant role in the process of organizational change within the context of the environmental agenda. Originality/value – This paper seeks to complement the research in this area by integrating observations from a case study into an existing model of levels of organizational change according to how a Portuguese business group incorporated environmental issues into its processes, policies and corporate culture.

GUI Behavior from Source Code Analysis

When developing interactive applications, considering the correctness of graphical user interfaces (GUIs) code is essential. GUIs are critical components of today's software, and contemporary software tools do not provide enough support for ensuring GUIs' code quality. GUIsurfer, a GUI reverse engineering tool, enables evaluation of behavioral properties of user interfaces. It performs static analysis of GUI code, generating state machines that can help in the evaluation of interactive applications. This paper describes the design, software architecture, and the use of GUIsurfer through an example. The tool is easily re-targetable, and support is available to Java/Swing, and WxHaskell. The paper sets the ground for a generalization effort to consider rich internet applications. It explores the GWT web applications' user interface programming toolkit.

Modifying fish gelatin electrospun membranes for biomedical applications: cross- linking and swelling behavior

Development of suitable membranes is a fundamental requisite for tissue and biomedical engineering applications. This work presents fish gelatin random and aligned electrospun membranes cross-linked with glutaraldehyde (GA). It was observed that the fiber average diameter and the morphology is not influenced by the GA exposure time and presents fibers with an average diameter around 250 nm. Moreover, when the gelatin mats are immersed in a phosphate buffered saline solution (PBS), they can retain as much as 12 times its initial weight of solution almost instantaneously, but the material microstructure of the fiber mats changes from the characteristic fibrous to an almost spherical porous structure. Cross-linked gelatin electrospun fiber mats and films showed a water vapor permeability of 1.37 ± 0.02 and 0.13 ± 0.10 (g.mm)/(m2.h.kPa), respectively. Finally, the processing technique and cross-linking process does not inhibit MC-3T3-E1 cell adhesion. Preliminary cell culture results showed good cell adhesion and proliferation in the cross-linked random and aligned gelatin fiber mats.

Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation

Polymeric materials have become the reference material for high reliability and performance applications. However, their performance in service conditions is difficult to predict, due in large part to their inherent complex morphology, which leads to non-linear and anisotropic behavior, highly dependent on the thermomechanical environment under which it is processed. In this work, a multiscale approach is proposed to investigate the mechanical properties of polymeric-based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, the coupling of a finite element method (FEM) and molecular dynamics (MD) modeling, in an iterative procedure, was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, this multiscale approach computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multiscale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.