Electrospun silk-elastin-like fiber mats for tissue engineering applications

Protein-based polymers are present in a wide variety of organisms fulfilling structural and mechanical roles. Advances in protein engineering and recombinant DNA technology allow the design and production of recombinant protein-based polymers (rPBPs) with an absolute control of its composition. Although the application of recombinant proteins as biomaterials is still an emerging technology, the possibilities are limitless and far superior to natural or synthetic materials, as the complexity of the structural design can be fully customized. In this work, we report the electrospinning of two new genetically engineered silk-elastin-like proteins (SELPs) consisting of alternate silk- and elastin-like blocks. Electrospinning was performed with formic acid and aqueous solutions at different concentrations without addition of further agents. The size and morphology of the electrospun structures was characterized by scanning electron microscopy showing to be dependent of concentration and solvent used. Treatment with air saturated with methanol was employed to stabilize the structure and promote water insolubility through a time-dependent conversion of random coils into β-sheets (FTIR). The resultant methanol-treated electrospun mats were characterized for swelling degree (570-720%), water vapour transmission rate (1083 g/m2/day) and mechanical properties (modulus of elasticity of ~126 MPa). Furthermore, the methanol-treated SELP fiber mats showed no cytotoxicity and were able to support adhesion and proliferation of normal human skin fibroblasts. Adhesion was characterized by a filopodia-mediated mechanism. These results demonstrate that SELP fiber mats can provide promising solutions for the development of novel biomaterials suitable for tissue engineering applications.

The influence of matrix mediated hopping conductivity, filler concentration, aspect ratio and orientation on the electrical response of carbon nanotube/polymer nanocomposites

A model to simulate the conductivity of carbon nanotube/polymer nanocomposites is presented. The proposed model is based on hopping between the fillers. A parameter related to the influence of the matrix in the overall composite conductivity is defined. It is demonstrated that increasing the aspect ratio of the fillers will increase the conductivity. Finally, it is demonstrated that the alignment of the filler rods parallel to the measurement direction results in higher conductivity values, in agreement with results from recent experimental work.

SHACC: a functional prototyper for a component calculus

Over the last decade component-based software development arose as a promising paradigm to deal with the ever increasing complexity in software design, evolution and reuse. SHACC is a prototyping tool for component-based systems in which components are modelled coinductively as generalized Mealy machines. The prototype is built as a HASKELL library endowed with a graphical user interface developed in Swing

Os impactos induzidos pelas obras cinematográficas nos destinos turísticos: a perceção dos residentes de Arcos de Valdevez

Este estudo tem como objetivo principal explorar as perceções dos residentes sobre o turismo induzido pelos filmes e os impactos destes sobre o desenvolvimento de um destino. Especificamente, o estudo analisou a perceção dos residentes sobre os impactos sociais, económicos e ambientais na vila de Arcos de Valdevez, em resultado da gravação e exibição da telenovela da TVI “Deixa que Te Leve”. Os dados foram recolhidos através de um questionário on-line, onde foram solicitadas as perceções dos residentes deste município dos impactos na localidade induzido pela telenovela. A maioria dos residentes concordam que a gravação e exibição (na televisão) da telenovela foi importante para o município e contribuiu para o aumento do número de turistas. Para os residentes, os impactos positivos foram mais significativos do que os impactos negativos, pelo que eles apoiariam o investimento necessário para a gravação de uma outra telenovela no seu município. Atendendo a que gestores dos destinos e as autoridades ligadas ao desenvolvimento do turismo visam planear um desenvolvimento turístico ideal, ao mesmo tempo que procuram minimizar os impactos negativos deste desenvolvimento nas comunidades locais, monitorizar as opiniões dos residentes sobre os impactos percebidos é uma boa forma de incorporar a reação dos residentes no planeamento e desenvolvimento do turismo. Os resultados deste estudo podem fornecer informações úteis nesse sentido.

WAML World Congress: Direito Médico Mundial em Portugal

Eis que existem boas notícias científicas em Portugal. O WAML World Congress é o maior e mais prestigiado congresso mundial de direito médico. E, desta vez, vai ter lugar em Portugal, mais em concreto na Cidade capital do Mondego, Coimbra, entre os próximos dias 2 e 7 de Agosto de 2015. O seu Presidente ou Chairman, será o especialista português em direito médico, professor da Faculdade de Direito da Universidade de Coimbra, Doutor André Gonçalo Dias Pereira. Especialista que já esteve a fazer um excelente Seminário em Barcelos, Escola Superior de Gestão do Instituto Politécnico do Cávado e do Ave, no dia 26 de Maio de 2014, com o título de “O Direito da Concorrência: análise de um caso real”. Tema que relacionou com a poderosa indústria farmacêutica, entre outros aspectos conexos. § Behold, there are good scientific news in Portugal. The WAML World Congress is the largest and most prestigious world congress of medical law. And this time, will take place in Portugal, more specifically in the Mondego capital city, Coimbra, between 2nd and August 7, 2015. The President or Chairman, will be the Portuguese expert in medical law professor Faculty of Law, University of Coimbra, Doctor André Gonçalo Dias Pereira. Specialist who has been doing an excellent Seminar in Barcelos, School of Management Cávado Polytechnic Institute and Ave, on May 26, 2014, with the title "The Competition Law: analysis of a real case." Theme related to the powerful pharmaceutical industry, and other related aspects.

Voxel-based registration of simulated and real patient CBCT data for accurate dental implant pose estimation

The success of dental implant-supported prosthesis is directly linked to the accuracy obtained during implant’s pose estimation (position and orientation). Although traditional impression techniques and recent digital acquisition methods are acceptably accurate, a simultaneously fast, accurate and operator-independent methodology is still lacking. Hereto, an image-based framework is proposed to estimate the patient-specific implant’s pose using cone-beam computed tomography (CBCT) and prior knowledge of implanted model. The pose estimation is accomplished in a threestep approach: (1) a region-of-interest is extracted from the CBCT data using 2 operator-defined points at the implant’s main axis; (2) a simulated CBCT volume of the known implanted model is generated through Feldkamp-Davis-Kress reconstruction and coarsely aligned to the defined axis; and (3) a voxel-based rigid registration is performed to optimally align both patient and simulated CBCT data, extracting the implant’s pose from the optimal transformation. Three experiments were performed to evaluate the framework: (1) an in silico study using 48 implants distributed through 12 tridimensional synthetic mandibular models; (2) an in vitro study using an artificial mandible with 2 dental implants acquired with an i-CAT system; and (3) two clinical case studies. The results shown positional errors of 67±34μm and 108μm, and angular misfits of 0.15±0.08º and 1.4º, for experiment 1 and 2, respectively. Moreover, in experiment 3, visual assessment of clinical data results shown a coherent alignment of the reference implant. Overall, a novel image-based framework for implants’ pose estimation from CBCT data was proposed, showing accurate results in agreement with dental prosthesis modelling requirements.