Improving fECG signal acquisition in the evaluation of fetal well-being

The ability to monitor fetal heart rate is vital during late pregnancy and labor in order to evaluate fetal well-being. Current monitoring practice is essentially based on external cardiotocography and, less frequently, during labor, invasive fetal scalp electrocardiography. Many current and envisaged applications could benefi t from simpler devices using a 3-lead ECG confi guration. We are designing a maternity support belt with an embedded wireless 3-lead ECG sensor, and have investigated the infl uence of the ground electrode position on signal quality. Data from over 100 pregnant women was collected with the ground electrode placed in 3 locations in order to determine optimum electrode placement and belt form factor.

An e-marketplace of healthcare and social care services: the perceived interest

The health and social care sector is receiving growing attention for the last years, due to the increased life expectancy, the public demand for a better quality of life and for better health services. These requirements can be met with more cost-efficient approaches and using new technology-based solutions for providing services. The paper presents and discusses some of the main results of a study undertaken in Guimarães, a Municipality at the North of Portugal, on the perceived relevance of an e-Marketplace of social and healthcare services for the inhabitants in general, and in particular for people with special needs; the study also included the identification of the most relevant services to be offered by this platform and allowed concluding that such an e-Marketplace is of recognized relevance and that it is expected a good adhesion from the population.

Coupling Mechanical and Electrical Behavior in the Multi-scale Simulation of Polymer-based CNT Nanocomposites

A numeric model has been proposed to investigate the mechanical and electrical properties of a polymeric/carbon nanotube (CNT) composite material subjected to a deformation force. The reinforcing phase affects the behavior of the polymeric matrix and depends on the nanofiber aspect ratio and preferential orientation. The simulations show that the mechanical behavior of a computer generated material (CGM) depends on fiber length and initial orientation in the polymeric matrix. It is also shown how the conductivity of the polymer/CNT composite can be calculated for each time step of applied stress, effectively providing the ability to simulate and predict strain-dependent electrical behavior of CNT nanocomposites.

REENGINEERING THE CONCEPT OF URBAN CARS: A CASE STUDY

Based on a previously developed mathematical model for fuel consumption of a modular car, here we discuss the cross impacts of engineering scenarios vs. flexibility in use for modular vehicle architectures to achieve the reduction of CO2 emissions targeted by the European Union, in 2009. A systems perspective is adopted in conceptualizing a modular architecture of vehicles. From a theoretical viewpoint, we found modular architecture of vehicles a potential design strategy to minimize fuel inefficiencies and, thus, a strategy for design for environment.

A practical framework for the generation and selection of strategic plans of action, The relevance of timeframe considerations and a systems thinking approach

The paper proposes a methodology especially focused on the generation of strategic plans of action, emphasizing the relevance of having a structured timeframe classification for the actions. The methodology explicitly recognizes the relevance of long-term goals as strategic drivers, which must insure that the complex system is capable to effectively respond to changes in the environment. In addition, the methodology employs engineering systems techniques in order to understand the inner working of the system and to build up alternative plans of action. Due to these different aspects, the proposed approach features higher flexibility compared to traditional methods. The validity and effectiveness of the methodology has been demonstrated by analyzing an airline company composed by 5 subsystems with the aim of defining a plan of action for the next 5 years, which can either: improve efficiency, redefine mission or increase revenues.

Needs and Opportunities in Ambient Assisted Living in Portugal

The exponential raise in the age dependency rate together with the difficulties in having conventional care solutions opens the space for the appearance and development of innovative Ambient Assisted Living (AAL) solutions.However, the development of these solutions requires a thorough understanding of user needs and wills. In this paper we present the scenarios being adopted in the context of AAL projects, as well as the products and services current available in each of the considered utilization scenarios. The needs of the Portuguese AAL users are analyzed through the discussion of some preliminary results from a survey targeted at the Portuguese population over 55 years old. These results will be used to characterize the needs and establish the readiness and willingness of elder Portuguese population in using AAL solutions.

Optimizing electrode positioning in 3-lead ECG chest devices

Although the 12-lead electrocardiogram has become an essential medical and research tool, many current and envisaged applications would benefit from simpler devices, using 3-lead ECG configuration. This is particularly true for Ambient Assisted Living (in a broad perspective). However, the chest anatomy of female patients, namely during pregnancy, can hamper the adequate placement of a 3-lead ECG device and, very often, electrodes are placed below the chest rather than at the precise thoracic landmarks. Thus, the aim of this study was to compare the effect of electrode positioning on the ECG signal of pregnant women and provide guidelines for device development. The effect of breast tissue on the ECG signal was investigated by relating breast size with the signal-to-noise ratio, root mean square and R-wave amplitude. Results show that the 3-lead ECG should be placed on the breast rather than under the breast and indicate positive correlation between breast size and signal-to-noise ratio.

The need for standardized tests to evaluate the reliability of data transport in wireless medical systems

Wireless medical systems are comprised of four stages, namely the medical device, the data transport, the data collection and the data evaluation stages. Whereas the performance of the first stage is highly regulated, the others are not. This paper concentrates on the data transport stage and argues that it is necessary to establish standardized tests to be used by medical device manufacturers to provide comparable results concerning the communication performance of the wireless networks used to transport medical data. Besides, it suggests test parameters and procedures to be used to produce comparable communication performance results.

Physical consequences of falls in the elderly: a literature review from 1995 to 2010

In the last decade, population ageing has been registered as a global phenomenon. A relation exists between falling and ageing, since falling frequency increases significantly with age. In fact, one in three older adult falls annually. Although ageing is generically associated with decrease and degeneration of psychological and physical functions, it is still not common for the correct identification of risk factors to lead to a clinical prognosis of the elder being in risk of falling. Therefore, the goal of this review article is to identify, categorise and analyse typical ageing and fall factors mentioned in the literature as well as to quantify the number of times they were referenced. The research considered hundreds of publications, but analysis was then restricted to the 87 most pertinent articles written in English and published in journals or scientific magazines between 1995 and 2010. We concluded that falls among older adults can be characterised by the following: anatomic characteristics and physiological consequences of ageing; the pathologies that induce falls, which can be neurological, musculoskeletal, cardiovascular and other diseases; causes and risk factors of falls that can be behavioural, biological, environmental or socio-economic; type of physical consequences of falls, including fractures, bruises, injuries or other physical consequences; and strategies to prevent, mitigate or rehabilitate, which can be of a physical, environmental or behavioural nature.

Factores determinantes do valor da empresa no mercado de capitais: evidência empírica para o PSI 20

El principal finalidad de la presente comunicación se traduce en el análisis del efecto de los indicadores de desempeño empresarial en la explicación del precio de las acciones que integran el principal índice bursátil de la Euronext Lisboa, el PSI 20. Para tal, recurrimos a un análisis fundamental, habiendo dividido los indicadores de desempeño empresarial en dos grupos, un con un cariz económico-financiero otro con un cariz bursátil. Utilizando una muestra de 17 empresas, los resultados son obtenidos a través de la aplicación del método OLS y reportan a 31 de Diciembre de 2007. Los resultados obtenidos sugieren que los indicadores de desempeño empresarial se presentan susceptibles de explicar el precio de mercado de las acciones de las empresas que integran el PSI 20. Se destaca el efecto significativamente positivo del resultado líquido y del valor contable y el efecto significativamente negativo del cash-flow. Los resultados obtenidos sugieren la existencia de una expectativa positiva relativamente al desempeño futuro de las empresas que integran el PSI 20.

Physical consequences of falls in the elderly: a literature review from 1995 to 2010

In the last decade, population ageing has been registered as a global phenomenon. A relation exists between falling and ageing, since falling frequency increases significantly with age. In fact, one in three older adult falls annually. Although ageing is generically associated with decrease and degeneration of psychological and physical functions, it is still not common for the correct identification of risk factors to lead to a clinical prognosis of the elder being in risk of falling. Therefore, the goal of this review article is to identify, categorise and analyse typical ageing and fall factors mentioned in the literature as well as to quantify the number of times they were referenced. The research considered hundreds of publications, but analysis was then restricted to the 87 most pertinent articles written in English and published in journals or scientific magazines between 1995 and 2010. We concluded that falls among older adults can be characterised by the following: anatomic characteristics and physiological consequences of ageing; the pathologies that induce falls, which can be neurological, musculoskeletal, cardiovascular and other diseases; causes and risk factors of falls that can be behavioural, biological, environmental or socio-economic; type of physical consequences of falls, including fractures, bruises, injuries or other physical consequences; and strategies to prevent, mitigate or rehabilitate, which can be of a physical, environmental or behavioural nature.

O desempenho empresarial no âmbito da análise dos factores explicativos da rendibilidade anormal anual das acções das empresas cotadas no mercado de capitais português

A relevância da informação existente no mercado de capitais na explicação da rendibilidade das acções das empresas é um dos temas actuais de estudo da literatura financeira. O debate sobre esta temática tem-se centrado na avaliação dos indicadores que se apresentam mais apropriados para explicar a rendibilidade das acções das empresas. Esta dissertação procura dar um contributo no sentido de enriquecer a evidência empírica acerca dos factores explicativos da rendibilidade apresentada pelas acções das empresas no mercado de capitais. Em particular, investiga-se o efeito de um conjunto de indicadores de desempenho empresarial, sectoriais, macroeconómicos e específicos ao mercado de capitais na explicação da rendibilidade anormal das acções da empresa no mercado de capitais português. Investiga-se ainda a possibilidade destes mesmos indicadores apresentarem uma explicação distinta na rendibilidade anormal das acções nas empresas que integram o índice bolsista PSI 20. Utilizando uma amostra de 54 empresas cotadas na Euronext Lisboa, os resultados estimados são obtidos através da aplicação do método GLS e da regressão por quantis. O período temporal sobre o qual versa o estudo encontra-se compreendido pelo ano de 2005 e pelo ano de 2009. Os resultados estimados sugerem que, na generalidade das empresas cotadas na Euronext Lisboa, existem variáveis estatisticamente significativas na explicação da rendibilidade anormal das acções das empresas em cada um dos quatro grandes grupos de variáveis independentes consideradas no estudo. Relativamente às empresas que integram o PSI 20, os resultados sugerem que, apesar de se manter o facto de existir variáveis estatisticamente significativas na explicação da rendibilidade anormal das acções das empresas nos quatro grandes grupos de variáveis, existem alterações na significância estatística de algumas variáveis, quando se compara com os resultados obtidos para a generalidade das empresas cotadas na praça financeira portuguesa. Quanto à estimação por quantis, pelos resultados obtidos, denota-se que apenas nas empresas com uma rendibilidade anormal mediana existem variáveis estatisticamente significativas nos quatro grandes grupos de variáveis. Contudo, nas empresas do PSI 20, apenas nas que apresentam uma rendibilidade anormal relativamente mais reduzida é que se encontram variáveis estatisticamente significativas nos quatro grandes grupos de variáveis consideradas.

Estimating Local Part Thickness in Midplane Meshes for Finite Element Analysis

Within the development of motor vehicles, crash safety (e.g. occupant protection, pedestrian protection, low speed damageability), is one of the most important attributes. In order to be able to fulfill the increased requirements in the framework of shorter cycle times and rising pressure to reduce costs, car manufacturers keep intensifying the use of virtual development tools such as those in the domain of Computer Aided Engineering (CAE). For crash simulations, the explicit finite element method (FEM) is applied. The accuracy of the simulation process is highly dependent on the accuracy of the simulation model, including the midplane mesh. One of the roughest approximations typically made is the actual part thickness which, in reality, can vary locally. However, almost always a constant thickness value is defined throughout the entire part due to complexity reasons. On the other hand, for precise fracture analysis within FEM, the correct thickness consideration is one key enabler. Thus, availability of per element thickness information, which does not exist explicitly in the FEM model, can significantly contribute to an improved crash simulation quality, especially regarding fracture prediction. Even though the thickness is not explicitly available from the FEM model, it can be inferred from the original CAD geometric model through geometric calculations. This paper proposes and compares two thickness estimation algorithms based on ray tracing and nearest neighbour 3D range searches. A systematic quantitative analysis of the accuracy of both algorithms is presented, as well as a thorough identification of particular geometric arrangements under which their accuracy can be compared. These results enable the identification of each technique’s weaknesses and hint towards a new, integrated, approach to the problem that linearly combines the estimates produced by each algorithm.

Applying complex network theory to the understanding of high-aspect-ratio carbon-filled composites

This work demonstrates that the theoretical framework of complex networks typically used to study systems such as social networks or the World Wide Web can be also applied to material science, allowing deeper understanding of fundamental physical relationships. In particular, through the application of the network theory to carbon nanotubes or vapour-grown carbon nanofiber composites, by mapping fillers to vertices and edges to the gap between fillers, the percolation threshold has been predicted and a formula that relates the composite conductance to the network disorder has been obtained. The theoretical arguments are validated by experimental results from the literature.

The influence of the dispersion method on the electrical properties of vapor-grown carbon nanofiber/epoxy composites

The influence of the dispersion of vapor-grown carbon nanofibers (VGCNF) on the electrical properties of VGCNF/ Epoxy composites has been studied. A homogenous dispersion of the VGCNF does not imply better electrical properties. In fact, it is demonstrated that the most simple of the tested dispersion methods results in higher conductivity, since the presence of well-distributed nanofiber clusters appears to be a key factor for increasing composite conductivity.