First record of Stygnidae for the state of Espírito Santo and description of a new Protimesius (Arachnida: Opiliones: Laniatores)

Protimesius osvaldoi sp. nov. is described from the Reserva Biológica de Sooretama, state of Espírito Santo, southeastern Brazil, being the first record of Stygnidae from this State and the southernmost record of the family in the Brazilian Atlantic Forest (hitherto, the family was recorded down to Bahia only), extending in 210 km south of the previously known distribution. This is a large species, with armature of leg IV very reduced and penial morphology differing from the closest counterparts mainly in the ventral plate, which recedes deeply at the lateral borders and has the distal margin curved ventrally and by the presence of two small intermediate setae. Protimesius Roewer, 1913 consisted hitherto of 17 species, recorded from northern/northeastern Brazil and Amazonia of adjacent countries. A key is given for the 17 species of Protimesius for which males are known.

Second record of bioluminescence in larvae of Xantholinus Dejean (Staphylinidae, Xantholinini) from Brazil

Second record of bioluminescence in larvae of Xantholinus Dejean, (Staphylinidae, Xantholinini) from Brazil. Bioluminescent Xantholinus larvae (Xantholinini, Staphylinidae) were collected in the Cerrado biome of Mato Grosso state, Brazil. These larvae are morphologically similar to the first bioluminescent larvae of this genus collected in the Atlantic Forest in São Paulo state; however they differ by their bioluminescent emission.

First Record of Culex (Culex) brethesi (Dyar) (Diptera: Culicidae) in Rio Grande do Sul State, Brazil

This is the first record of Culex (Culex) brethesi (Dyar) in Rio Grande do Sul state, Brazil. The species was identified from specimens collected in a sand bar vegetation with the aid of a Nasci's trap, during an expedition for surveillance of the West Nile Virus in July of 2006, in the city of Mostardas, Rio Grande do Sul, Brazil.

Resurrection of Anopheles goeldii from synonymy with Anopheles nuneztovari (Diptera, Culicidae) and a new record for Anopheles dunhami in the Brazilian Amazon

Nucleotide sequences of the internal transcribed spacer 2 (ITS2) rDNA and partial sequences of the cytochrome coxidase subunit I (COI) mtDNA and white gene nDNA were obtained from specimens of Anopheles nuneztovari A collected in Macapá (state of Amapá), Óbidos, Prainha and Almeirim (state of Pará), Itacoatiara and Parintins (state of Amazonas), Brazil, and compared with previously published sequences of A. nuneztovari s.l. Results of the Bayesian phylogenetic analyses performed using either COI or combined ITS2, COI and white gene sequences suggest that An. nuneztovari B/C is distinct from specimens obtained in the Amazonas/Solimões River basin. Anopheles goeldii, currently in synonymy with An. nuneztovari, was described from individuals collected in Belterra (= Fordlândia) in the Tapajós River, state of Pará, Southern Amazonas River. Morphological comparisons of the characteristics of the male genitalia indicated that An. nuneztovari A and An. goeldii are similar but distinct from An. nuneztovariB/C by the apex of the aedeagus. In considering the results of the phylogenetic analyses and morphological comparisons, An. goeldii is resurrected from synonymy with An. nuneztovari. Additionally, Anopheles dunhamiis reported for the first time in Parintins. This species can be distinguished from An. goeldiiby characters of the male genitalia and molecular data

The first record on Brazilian stingless bees published 450 years ago by Hans Staden

Only a few decades after 1492, when Christopher Columbus arrived on a Caribbean island and Pedro Alvares Cabral claimed Brazil for Portugal in 1500, a German mercenary gave the first description of stingless bees in 1557. He got to know them when he was imprisoned for months by an anthropophagous tribe in the coastal region of Santos, today in the State of Sao Paulo. This rather short but nevertheless extremely exact record on stingless bees is hidden in the first book on Brazil. Three species and important aspects of their life history were treated. This early description has been completely overlooked by bee scientists until now. My note intends to close this evident gap.

Spiranthera atlantica (Rutaceae, Galipeae), a New Species and the First Record of the Genus for the Brazilian Atlantic Forest

A new species of Spiranthera A. St.-Hil. (Rutaceae, Galipeinae) is illustrated and described from Espirito Santo, Brazil. Spiranthera atlantica Pi rani represents the first species record for the genus in the Atlantic Forest of eastern Brazil. The new (axon resembles the Amazonian S. guianensis Sandwith but differs by its smaller, few-flowered inflorescences and by the fruit and leaflet morphology.

FORAMINIFERAL RECORD OF CHANGES IN SUMMER MONSOON PRECIPITATION AT THE SOUTHEASTERN BRAZILIAN CONTINENTAL MARGIN SINCE THE LAST GLACIAL MAXIMUM

Changes in the oxygen isotopic composition of the planktonic foraminifer Globigerinoides ruber and in the foraminifera faunal composition in a core retrieved from the southeastern Brazilian continental margin were used to infer past changes in the hydrological balance and monsoon precipitation in the western South Atlantic since the Last Glacial Maximum (LGM). The results suggest a first-order orbital (precessional) control on the South American Monsoon precipitation. This agrees with previous studies based on continental proxies except for LGM estimates provided by pollen records. The causes for this disagreement are discussed.

Notes on Acaulospora bireticulata Rothwell & Trappe and first record of Acaulospora koskei Blask. from Brazil)

(Notes on Acaulospora bireticulata Rothwell & Trappe and first record of Acaulospora koskei Blask. from Brazil). Our knowledge of species distribution in arbuscular mycorrhizal fungi (AMF) is still limited and morphological variations found in isolates of one species may provide additional insight for understanding the characters used in the taxonomy of this group. The aims of this work were to expand biogeographical data regarding Acaulospora koskei Blaszk. and Acaulospora bireticulata Rothwell & Trappe, both found in an Araucaria Forest in Sao Paulo state, Brazil, as well as to compare the descriptions of these species with those of other similar AMF.

Combined photocatalytic and fungal processes for the treatment of nitrocellulose industry wastewater

The objective of this work was to characterize the delignification effluent originating from the delignification industry and evaluate the combination of the fungus and photocatalytic process (TiO(2)/UV system) for the treatment of this effluent. The delignification effluent has proven harmful to the environment because it presents high color (3516 CU), total phenol (876 mg/L and TOC (1599 mg/L) and is also highly toxic even in a low concentration. The results of photocatalysis were 11%, 25% and 13% higher for reductions in color, total phenol and TOC, respectively. The combined treatments presented benefits when compared to the non-combined treatments. Fungus and photocatalysis in combination proved to be the best treatment, reducing the color, total phenol, toxicity (inhibition of Escherichia coli growth) and TOC by 94.2%, 92.6%, 4.9% and 62%, respectively. (C) 2008 Elsevier B.V. All rights reserved.

AnSBBR Applied to a Personal Care Industry Wastewater Treatment: Effects of Fill Time, Volume Treated Per Cycle, and Organic Load

A study was performed regarding the effect of the relation between fill time, volume treated per cycle, and influent concentration at different applied organic loadings on the stability and efficiency of an anaerobic sequencing batch reactor containing immobilized biomass on polyurethane foam with recirculation of the liquid phase (AnSBBR) applied to the treatment of wastewater from a personal care industry. Total cycle length of the reactor was 8 h (480 min). Fill times were 10 min in the batch operation, 4 h in the fed-batch operation, and a 10-min batch followed by a 4-h fed batch in the mixed operation. Settling time was not necessary since the biomass was immobilized and decant time was 10 min. Volume of liquid medium in the reactor was 2.5 L, whereas volume treated per cycle ranged from 0.88 to 2.5 L in accordance with fill time. Influent concentration varied from 300 to 1,425 mg COD/L, resulting in an applied volumetric organic load of 0.9 and 1.5 g COD/L.d. Recirculation flow rate was 20 L/h, and the reactor was maintained at 30 A degrees C. Values of organic matter removal efficiency of filtered effluent samples were below 71% in the batch operations and above 74% in the operations of fed batch followed by batch. Feeding wastewater during part of the operational cycle was beneficial to the system, as it resulted in indirect control over the conversion of substrate into intermediates that would negatively interfere with the biochemical reactions regarding the degradation of organic matter. As a result, the average substrate consumption increased, leading to higher organic removal efficiencies in the fed-batch operations.

Anaerobic sequencing batch biofilm reactor applied to automobile industry wastewater treatment: Volumetric loading rate and feed strategy effects

This paper presents a technological viability study of wastewater treatment in an automobile industry by an anaerobic sequencing batch biofilm reactor containing immobilized biomass (AnSBBR) with a draft tube. The reactor was operated in 8-h cycles, with agitation of 400 rpm, at 30 degrees C and treating 2.0 L wastewater per cycle. Initially the efficiency and stability of the reactor were studied when supplied with nutrients and alkalinity. Removal efficiency of 88% was obtained at volumetric loading rate (VLR) of 3.09 mg COD/L day. When VLR was increased to 6.19 mg COD/L day the system presented stable operation with reduction in efficiency of 71%. In a second stage the AnSBBR was operated treating wastewater in natura, i.e., without nutrients supplementation, only with alkalinity, thereby changing feed strategy. The first strategy consisted in feeding 2.0 L batch wise (10 min), the second in feeding 1.0 L of influent batch wise (10 min) and an additional 1.0 L fed-batch wise (4 h), both dewatering 2.0 L of the effluent in 10 min. The third one maintained 1.0 L of treated effluent in the reactor, without discharging, and 1.0 L of influent was fed fed-batch wise (4 h) with dewatering 1.0 L of the effluent in 10 min. For all implemented strategies (VLR of 1.40, 2.57 and 2.61 mg COD/L day) the system presented stability and removal efficiency of approximately 80%. These results show that the AnSBBR presents operational flexibility, as the influent can be fed according to industry availability. In industrial processes this is a considerable advantage, as the influent may be prone to variations. Moreover, for all the investigated conditions the kinetic parameters were obtained from fitting a first-order model to the profiles of organic matter, total volatile acids and methane concentrations. Analysis of the kinetic parameters showed that the best strategy is feeding 1.0 L of influent batchwise (10 min) and 1.0 L fed-batch wise (4 h) in 8-h cycle. (c) 2007 Elsevier B.V. All rights reserved.

Coloured Petri nets and graphical simulation for the validation of a robotic cell in aircraft industry

This paper proposes a mixed validation approach based on coloured Petri nets and 3D graphic simulation for the design of supervisory systems in manufacturing cells with multiple robots. The coloured Petri net is used to model the cell behaviour at a high level of abstraction. It models the activities of each cell component and its coordination by a supervisory system. The graphical simulation is used to analyse and validate the cell behaviour in a 3D environment, allowing the detection of collisions and the calculation of process times. The motivation for this work comes from the aeronautic industry. The automation of a fuselage assembly process requires the integration of robots with other cell components such as metrological or vision systems. In this cell, the robot trajectories are defined by the supervisory system and results from the coordination of the cell components. The paper presents the application of the approach for an aircraft assembly cell under integration in Brazil. This case study shows the feasibility of the approach and supports the discussion of its main advantages and limits. (C) 2011 Elsevier Ltd. All rights reserved.

Toxicity-directed approach of polyester manufacturing industry wastewater provides useful information for conducting treatability studies

A broader characterization of industrial wastewaters, especially in respect to hazardous compounds and their potential toxicity, is often necessary in order to determine the best practical treatment (or pretreatment) technology available to reduce the discharge of harmful pollutants to the environment or publicly owned treatment works. Using a toxicity-directed approach, this paper sets the base for a rational treatability study of polyester resin manufacturing. Relevant physical and chemical characteristics were determined. Respirometry was used for toxicity reduction evaluation after physical and chemical effluent fractionation. Of all the procedures investigated, only air stripping was significantly effective in reducing wastewater toxicity. Air stripping in pH 7 reduced toxicity in 18.2%, while in pH 11 a toxicity reduction of 62.5% was observed. Results indicated that toxicants responsible for the most significant fraction of the effluent`s instantaneous toxic effect to unadapted activated sludge were organic compounds poorly or not volatilized in acid conditions. These results led to useful directions for conducting treatability studies which will be grounded on actual effluent properties rather than empirical or based on the rare specific data on this kind of industrial wastewater. (C) 2008 Elsevier B.V. All rights reserved.