Influence from the sulfonate group (RSO(3)(-)) on the conversion process and emission efficiency of poly(p-phenylene vinylene)

The discovery of an alternative route to convert poly(xylyliden tetrahydrothiophenium chloride) (PTHT) into poly(p-phenylene vinylene) (PPV) using dodecylbenzenesulfonate (DBS) has allowed the formation of ultrathin films with unprecedented control of architecture and emission properties. In this work, we show that this route may be performed with several sufonated compounds where RSO(3)(-) replaces the counter-ion (Cl(-)) of PTHT, some of which are even more efficient than DBS. Spin-coating films were produced from PTHT and azo-dye molecules, an azo-polymer and organic salts as counter-ions of PTHT. The effects of the thermal annealing step of PTHT/RSO(3)(-) films at 110 and 230 degrees C were monitored by measuring the absorption and emission spectra. The results indicate that the exchange of the counterion Cl(-) of PTHT by a linear long chain with RSO(3)(-) group is a general procedure to obtain PPV polymer at lower conversion temperature (ca. 110 degrees C) with significant increase in the emission efficiency, regardless of the chemical position and the number of sulfonate groups. With the enhanced emission caused by Congo Red and Tinopal as counter-ions, it is demonstrated that the new synthetic route is entirely generic, which may allow accurate control of conversion and emission properties. (C) 2010 Elsevier B.V. All rights reserved.

Fibroelastic Components of the Vesicourethral Junction of Rats in the Aging Process

The vesicourethral junction comprising the vesical trigone, is relevant in setting and positioning of the urinary bladder, along with the vesical neck, fixed by lateral ligaments of the bladder and tendinous arch of the pelvis fascia. Namely, the puboprostatic ligament (men) and the pubovesical (women). The circular set elastic fibers in this junction are important and valuable in the elasticity and plasticity of the area, allowing quick expansion and withdrawal with the flow of urine, and associated to smooth muscle tissue and nerve control form an important collective to maintain urinary continence. The objective of the present study is to describe the elastic system in the vesicouretral junction in relation to aging and its involvement in the states of urinary continence and incontinence, as well as the study of the vesicouretral junction in various age groups while evaluating with electron transmission microscopy. To carry out the study, 12 Wistar rats were used, divided into groups: neonate (4 animals), adult group (4 animals) and aged group (4 animals). Electron transmission microscopy with use of tanic acid technique associated to glutaraldehyde fixation, satisfactorily showed the extreme structural differences between mature elaunin and oxytalan fibers present between intercelular spaces and bundles of collagen fibers. The phases of elastogenesis in neonate animals and degradation of the elastic system of older animals were also evaluated.

Effects of exercise on the morphology of the myenteric neurons of the duodenum of Wistar rats during the ageing process

This study aimed to evaluate the effects of regular physical activity on the morphology of the myenteric plexus of the duodenum in rats during the ageing process. To this end, 45 Wistar rats were divided into three groups: C (sedentary - 6 months old), S (sedentary - 12 months old) and T (trained - 12 months old). The animals of group S were given with a physical activity programme consisting of a 10-min-treadmill workout once a week. The animals of group T were submitted to the physical activity programme five times a week. Their duodenums were collected and submitted to the techniques of nicotinamide adenine dinucleotide (NADH)-diaphorase enzyme histochemistry for whole-mount preparations and transmission electron microscopy. No differences in the constitution of the myenteric plexuses were found when the sedentary and trained groups were compared with the control group. The ultrastructural features were similar for the three groups. However, it was verified that the physical activity of the trained animals resulted in a similar myenteric neuron morphology to that of the adult animals (6 months old), thereby confirming its beneficial effect, as the sedentary animals had larger alterations in the collagen fibrils and the basal membrane that occur through ageing. The quantitative analysis showed that the NADH-diaphorase positive neurons decreased with ageing and increased with physical activity (P > 0.05). No significant alteration (P > 0.05) in the neuronal profile area of the NADH-diaphorase positive neurons has been observed with ageing.

Analysis of the genome of Spodoptera frugiperda nucleopolyhedrovirus (SfMNPV-19) and of the high genomic heterogeneity in group II nucleopolyhedroviruses

The genome of the most virulent among 22 Brazilian geographical isolates of Spodoptera frugiperda nucleopolyhedrovirus, isolate 19 (SfMNPV-1 9), was completely sequenced and shown to comprise 132 565 bp and 141 open reading frames (ORFs). A total of 11 ORFs with no homology to genes in the GenBank database were found. Of those, four had typical baculovirus; promoter motifs and polyadenylation sites. Computer-simulated restriction enzyme cleavage patterns of SfMNPV-1 9 were compared with published physical maps of other SfMNPV isolates. Differences were observed in terms of the restriction profiles and genome size. Comparison of SfMNPV-1 9 with the sequence of the SfMNPV isolate 3AP2 indicated that they differed due to a 1427 bp deletion, as well as by a series of smaller deletions and point mutations. The majority of genes of SfMNPV-1 9 were conserved in the closely related Spodoptera exigua NPV (SeMNPV) and Agrotis segetum NPV (AgseMNPV-A), but a few regions experienced major changes and rearrangements. Synthenic maps for the genomes of group 11 NPVs revealed that gene collinearity was observed only within certain clusters. Analysis of the dynamics of gene gain and loss along the phylogenetic tree of the NPVs showed that group 11 had only five defining genes and supported the hypothesis that these viruses form ten highly divergent ancient lineages. Crucially, more than 60% of the gene gain events followed a power-law relation to genetic distance among baculoviruses, indicative of temporal organization in the gene accretion process.

Effect of different dental composite resins on the polymerization process

Dental composite resins possess good esthetic properties, and are currently among the most popular dental restorative materials. Both organic and inorganic phases might influence the material behavior, the filler particle features and rate are the most important factors related to improvement of the mechanical properties of resin composites. Thus, the objective of this study was to evaluate the effect of three different composite resins on the polymerization process by Vickers hardness test. The samples were prepared using three different composite resins, as follow: group I-P-60 (3M/ESPE); group II-Herculite XRV (Kerr), and group III-Durafill (Heraeus-Kulzer). The samples were made in a polytetrafluoroethylene mould, with a rectangular cavity measuring 7 mm in length, 4 mm in width, and 3 mm in thickness. The samples were photo-activated by one light-curing unit based on blue LEDs (Ultrablue III-DMC/Brazil) for 20 and 40 s of irradiation times. The Vickers hardness test was performed 24 h after the photo-activation until the standardized depth of 3 mm. The Vickers hardness mean values varied from 158.9 (+/- 0.81) to 81.4 (+/- 1.94) for P-60, from 138.7 (+/- 0.37) to 61.7 (+/- 0.24) for Herculite XRV, and from 107. 5 (+/- 0.81) to 44.5 (+/- 1.36) for Durafill composite resins photo-activated during 20 s for the 1st and 2nd mm, respectively. During 40 s of photo-activation, the Vickers hardness mean values were: from 181.0 (+/- 0.70) to 15.6 (+/- 0.29) for P-60, and from 161.8 (+/- 0.41) to 11.2 (+/- 0.17) for Herculite XRV composite resins, for the 1st and 3th mm, respectively. For Durafill composite resin the mean values varied from 120.1 (+/- 0.66) to 61.7 (+/- 0.20), for the 1st and 2nd mm, respectively. The variation coefficient (CV) was in the most of the groups lower than 1%, then the descriptive statistic analysis was used. The Vickers hardness mean values for Durafill were lower than P-60 and Herculite XRV composite resins for 20 and 40 s of irradiation time. The polymerization process was greatly affected by the composition of the composite resins.