Friction coefficient and abrasive wear modes in ball-cratering tests conducted at constant normal force and constant pressure-Preliminary results

The micro-scale abrasive wear test by rotative ball has gained large acceptance in universities and research centers, being widely used in studies on the abrasive wear of materials. Two wear modes are usually observed in this type of test: ""rolling abrasion"" results when the abrasive particles roll on the surface of the tested specimen, while ""grooving abrasion"" is observed when the abrasive particles slide; the type of wear mode has a significant effect on the overall behaviour of a tribological system. Several works on the friction coefficient during abrasive wear tests are available in the literature, but only a few were dedicated to the friction coefficient in micro-abrasive wear tests conducted with rotating ball. Additionally, recent works have identified that results may also be affected by the change in contact pressure that occurs when tests are conducted with constant applied force. Thus, the purpose of this work is to study the relationship between friction coefficient and abrasive wear modes in ball-cratering wear tests conducted at ""constant normal force"" and ""constant pressure"". Micro-scale abrasive wear tests were conducted with a ball of AISI52100 steel and a specimen of AISIH10 tool steel. The abrasive slurry was prepared with black silicon carbide (SiC) particles (average particle size of 3 mu m) and distilled water. Two constant normal force values and two constant pressure values were selected for the tests. The tangential and normal loads were monitored throughout the tests and their ratio was calculated to provide an indication of the friction coefficient. In all cases, optical microscopy analysis of the worn craters revelated only the presence of grooving abrasion. However, a more detailed analysis conducted by SEM has indicated that different degrees of rolling abrasion have also occurred along the grooves. The results have also shown that: (i) for the selected values of constant normal force and constant pressure, the friction coefficient presents, approximately, the same range of values and (ii) loading conditions play an important role on the occurrence of rolling abrasion or grooving abrasion and, consequently, on the average value and scatter of the friction coefficient in micro-abrasive wear tests. (C) 2009 Elsevier B.V. All rights reserved.

An improved continuous medium technique for structural frame analysis

This paper presents an improved constitutive equation of frame in the context of continuous medium technique. This improved constitutive equation, which is a consistent formulation of column global bending, is applicable to a complete class of frameworks including the ideal shear frame panel, for which the beams are assumed to be rigid, and the associated column system, for which the rigidity of beams is negligible. Global buckling and second-order effects of the frame structure are discussed. The main results can be extended to other types of lateral stiffening elements as built-up columns. A worked example is presented in order to compare the main results with those obtained by the classic matrix method. Copyright (C) 2007 John Wiley & Sons, Ltd.

An RFID Bulk Cargo Supervising System

In this work, a system using active RFID tags to supervise truck bulk cargo is described. The tags are attached to the bodies of the trucks and readers are distributed in the cargo buildings and attached to weighs and the discharge platforms. PDAs with camera and support to a WiFi network are provided to the inspectors and access points are installed throughout the discharge area to allow effective confirmations of unload actions and the acquisition of pictures for future audit. Broadband radio equipments are used to establish efficient communication links between the weighs and cargo buildings which are usually located very far from each other in the field. A web application software was especially developed to enable robust communication between the equipments for efficient device management, data processing and reports generation to the operating personal. The system was deployed in a cargo station of a Brazilian seashore port. The obtained results prove the effectiveness of the proposed system.

Sex differences in the phenotypic expression of obsessive-compulsive disorder: an exploratory study from Brazil

Previous studies have shown differences in clinical features of obsessive-compulsive disorder (OCD) between men and women, including mean age at onset of obsessive-compulsive symptoms (OCS), types of OCS, comorbid disorders, course, and prognosis. The aim of this study was to compare male and female Brazilian patients with OCD on several demographic and clinical characteristics. Three hundred thirty Outpatients with OCD (Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition [DSM-IV], criteria) who sought treatment at 3 Brazilian public universities and at 2 private practice clinics in the city of Sao Paulo were evaluated. The assessment instruments used were the Yale-Brown Obsessive-Compulsive Scale to evaluate OCD severity and symptoms, the Beck Depression and Anxiety Inventories, the Yale Global Tic Severity Scale, and the Structured Clinical Interview for Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Axis I Disorders to assess psychiatric comorbidity. Fifty-five percent of the patients (n = 182) were men who were significantly more likely than women to be single and to present sexual, religious, and symmetry obsessions and mental rituals. They also presented earlier onset of OCS and earlier symptom interference in functioning, and significantly more comorbid tic disorders and posttraumatic stress disorder. Women, besides showing significantly higher mean scores in the Beck Depression and Anxiety Inventories, were more likely to present comorbid simple phobias, eating disorders in general and anorexia in particular, impulse control disorders in general, and compulsive buying and skin picking in particular. No significant differences were observed between sexes concerning family history of OCS or OCD, and global symptoms severity, either in obsession or compulsive subscale. The present study confirms the presence of sex-related differences described in other countries and cultures. The fact that the OCS start earlier and probably have a worse impact in men can eventually lead to more specific and efficacious treatment approaches for these patients. (C) 2009 Elsevier Inc. All rights reserved.