Geophysical investigation using resistivity and GPR methods: a case study of a lubricant oil waste disposal area in the city of Ribeiro Preto, So Paulo, Brazil

Geophysics has been shown to be effective in identifying areas contaminated by waste disposal, contributing to the greater efficiency of soundings programs and the installation of monitoring wells. In the study area, four trenches were constructed with a total volume of about 25,000 m(3). They were almost totally filled with re-refined lubricating oil waste for approximately 25 years. No protection liners were used in the bottoms and laterals of the disposal trenches. The purpose of this work is to evaluate the potential of the resistivity and ground penetrating radar (GPR) methods in characterizing the contamination of this lubricant oil waste disposal area in Ribeiro Preto, SP, situated on the geological domain of the basalt spills of the Serra Geral Formation and the sandstones of the Botucatu Formation. Geophysical results were shown in 2D profiles. The geophysical methods used enabled the identification of geophysical anomalies, which characterized the contamination produced by the trenches filled with lubricant oil waste. Conductive anomalies (smaller than 185 Omega m) immediately below the trenches suggest the action of bacteria in the hydrocarbons, as has been observed in several sites contaminated by hydrocarbons in previously reported cases in the literature. It was also possible to define the geometry of the trenches, as evidenced by the GPR method. Direct sampling (chemical analysis of the soil and the water in the monitoring well) confirmed the contamination. In the soil analysis, low concentrations of several polycyclic aromatic hydrocarbons (PAHs) were found, mainly naphthalene and phenanthrene. In the water samples, an analysis verified contamination of the groundwater by lead (Pb). The geophysical methods used in the investigation provided an excellent tool for environmental characterization in this study of a lubricant oil waste disposal area, and could be applied in the study of similar areas.

New Species of Earless Lizard Genus Heterodactylus (Squamata: Gymnophthalmidae) from the Highlands of Chapada Diamantina, State of Bahia, Brazil

A new species of Heterodactylus is described based on two specimens obtained in the highlands of Chapada Diamantina, state of Bahia, Brazil. The new lizard is characterized by very elongate body and tail, absence of external ear opening, presence of moveable eyelids, absence of prefrontals and frontoparietals, a vestigial interparietal, 37-39 dorsal and 27-29 ventral transverse scale rows, 23-25 scales around midbody, six gular scale rows, and 10-11 and 14-15 fourth finger and fourth toe infradigital lamellae, respectively. The new species is most similar to Heterodactylus lundii from which it differs by the absence of contact between frontal and interparietal, by having wider than long parietals, smooth posterior dorsal scales, posterior ventral scales almost twice longer than wide, a lower number of scales around midbody, last supralabial in contact with the granules of the ear depression, and a more elongate body. The new species occurs about 1,100 km north of the northernmost known record of H. lundii. Species of Heterodactylus seem to be restricted to areas of cold climates associated with high latitudes and mountainous areas of eastern Brasil.

New species of Amphisbaena with a nonautotomic and dorsally tuberculate blunt tail from state of Bahia, Brazil (Squamata, Amphisbaenidae)

A new species of Amphisbaena is described from Fazenda Caraibas, municipality of Mucuge, state of Bahia, Brazil, in the northern portion of the Serra do Espinhaco. The new species is a small amphisbaenian without precloacal pores, 210-213 body annuli, 12-13 tail annuli without evident autotomic site, and 14 dorsal and 14-15 ventral segments per annuli at midbody. The striking difference of this form is the presence of small tubercles on the dorsal region of its tail. This feature is unique among its congeners, although Rhineura floridana, a North American amphisbaenian, has tubercles on its tail. We suggest that the presence of tubercles on the tail of Amphisbaena sp. nov. and Rhineura floridana has arisen independently.

New Species of Anops Bell, 1833 (Squamata, Amphisbaenia) from Jalapao Region in the Brazilian Cerrado

A new species of keel-headed amphisbaenian of the genus Anops is described from the Cerrado of the Jalapao region, Tocantins state, Brazil. This new species of Anops is described from a single specimen, which may be easily distinguished from the other species of the genus, Anops bilabialatus and Anops kingii, by showing an extremely narrow head (37.2% head length); a row of eight occipitals anterior to the first body annulus; temporal present, mental and postmental fused; four postgenial rows located between the malars; and two malars posterior to the second infralabial. The new species is the first of the genus found in the Cerrado core area, and, based on the available records, the single species in the genus may be restricted to this region.

Advertisement call, vocal activity, and geographic distribution of Brachycephalus hermogenesi (Giaretta and Sawaya, 1998) (Anura, Brachycephalidae)

Brachycephalus hermogenesi is an endemic leaf litter inhabitant of the Atlantic forest of southeastern Brazil, whose original distribution included a restricted area near the boundaries of the States of Sao Paulo and Rio de Janeiro. We were surprised to find out, while conducting herpetofaunal surveys at Estacao Biologica de Boraceia (EBB), that the background forest insect-like sound we have been searching for corresponded to calling individuals of the species. Males call during the day at high densities, hidden under the leaf litter. Individuals do not answer playback, seem to move very infrequently, and seem to ignore nearby calling activity. We gathered data on annual and daily vocal activity of the species at EBB, observing a total of 1,549 calls given by 31 focal individuals in November 2003 and 2005. The call varies from short single note calls to calls composed of groups of two to seven similar notes emitted at regular intervals. We also extend the known distribution of the species southward to the State of Sao Paulo.

Natural History of the Lutz`s Frog Cycloramphus lutzorum Heyer, 1983 (Anura: Cycloramphidae) in the Brazilian Atlantic Forest: Description of the Advertisement Call, Tadpole, and Karyotype

We describe the advertisement call, tadpole, karyotype, and additional information on the natural history of Cycloramphus lutzorum from southern Brazil. Sonograms were generated from digitally recorded calls. Tadpoles were collected in the field for description in the lab, and an adult was collected for karyotyping. Data on seasonal activity were gathered monthly from November 2005 to November 2007. All tadpoles (N = 21), juveniles (N = 18), and adults (N = 52) were found exclusively in streams. Reproduction, as identified by calling frogs, occurred from July through November. Frogs call all day long, but mostly at dusk, from rock crevices inside the stream edges near the splash zone. The call is short and loud, with 11 pulsed notes, of 491-641 ms, with a dominant frequency of 0.98-1.39 kHz. We describe the exotrophic and semiterrestrial tadpoles, always found in constantly humid vertical rock walls in the stream. Tadpoles of C. lutzorum are recognized by differences in labial tooth row formula, eye diameter, body shape, position of nares, and development of tail. Like congeneric species, the karyotype of C. lutzorum comprises 26 metacentric and submetacentric chromosomes. Cycloramphus lutzorum is restricted to and adapted for living in fast flowing streams, many of which are threatened by deforestation, pollution, and habitat loss. Therefore, we recommend the status of C. lutzorum be changed from its current ""Data Deficient"" to ""Near Threatened (NT)"" in the IUCN species red list.

Karyotypes of a Cryptic Diploid Form of the Unisexual Leposoma percarinatum (Squamata, Gymnophthalmidae) and the Bisexual Leposoma ferreirai from the Lower Rio Negro, Amazonian Brazil

Karyotypes of Leposoma show a clear differentiation between species of the scincoides group from Brazilian Atlantic Forest (2n = 52, without distinctive size groups of chromosomes) and those of the parietale group from the Amazon (2n = 44, with 20M + 24m). In a previous study, we found that in the parietale group the parthenoform Leposoma percarinatum from the state of Mato Grosso, Brazil, exhibited a triploid karyotype (3n = 66) with 30 macrochromosomes and 36 microchromosomes. It was suggested that this karyotype arose after hybridization between a bisexual species with N = 22 (10M + 12m) and a hypothetical unisexual cryptic diploid form of the L. percarinatum complex. Herein, we describe the karyotypes for two species of the parietale group occurring sympatrically in the Arquipelago das Anavilhanas, lower Rio Negro, in Amazonian Brazil. The first represents a distinctive diploid parthenogenetic clone of the L. percarinatum complex, and the other is the recently described Leposoma ferreirai. Both species have 44 biarmed chromosomes clearly represented by 20 macrochromosomes and 24 microchromosomes and present Ag-NORs in one pair of the smallest sized microchromosomes; heteromorphism of size for these regions was detected in L. percarinatum. C-banding revealed blocks of constitutive heterochromatin on the telomeric and pericentromeric regions of macrochromosomes and some microchromosomes. The description of a diploid karyotype (2n = 44, 20M + 24m) for the L. percarinatum complex and its sympatric congener L. ferreirai provides new insight for a better understanding of the origin of parthenogenesis in the L. percarinatum complex.

Temperature Dependence of the Intergranular Critical Current Density in Uniaxially Pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) Samples

We have studied the normal and superconducting transport properties of Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) (Bi-2223) ceramic samples. Four samples, from the same batch, were prepared by the solid-state reaction method and pressed uniaxially at different compacting pressures, ranging from 90 to 250 MPa before the last heat treatment. From the temperature dependence of the electrical resistivity, combined with current conduction models for cuprates, we were able to separate contributions arising from both the grain misalignment and microstructural defects. The behavior of the critical current density as a function of temperature at zero applied magnetic field, J (c) (T), was fitted to the relationship J (c) (T)ae(1-T/T (c) ) (n) , with na parts per thousand 2 in all samples. We have also investigated the behavior of the product J (c) rho (sr) , where rho (sr) is the specific resistance of the grain-boundary. The results were interpreted by considering the relation between these parameters and the grain-boundary angle, theta, with increasing the uniaxial compacting pressure. We have found that the above type of mechanical deformation improves the alignment of the grains. Consequently the samples exhibit an enhance in the intergranular properties, resulting in a decrease of the specific resistance of the grain-boundary and an increase in the critical current density.

An R implementation for generalized Birnbaum-Saunders distributions

The Birnbaum-Saunders (BS) model is a positively skewed statistical distribution that has received great attention in recent decades. A generalized version of this model was derived based on symmetrical distributions in the real line named the generalized BS (GBS) distribution. The R package named gbs was developed to analyze data from GBS models. This package contains probabilistic and reliability indicators and random number generators from GBS distributions. Parameter estimates for censored and uncensored data can also be obtained by means of likelihood methods from the gbs package. Goodness-of-fit and diagnostic methods were also implemented in this package in order to check the suitability of the GBS models. in this article, the capabilities and features of the gbs package are illustrated by using simulated and real data sets. Shape and reliability analyses for GBS models are presented. A simulation study for evaluating the quality and sensitivity of the estimation method developed in the package is provided and discussed. (C) 2008 Elsevier B.V. All rights reserved.