Directed self-assembly of quantum structures by nanomechanical stamping using probe tips

We demonstrate that nanomechanically stamped substrates can be used as templates to pattern and direct the self-assembly of epitaxial quantum structures such as quantum dots. Diamond probe tips are used to indent or stamp the surface of GaAs( 100) to create nanoscale volumes of dislocation-mediated deformation, which alter the growth surface strain. These strained sites act to bias nucleation, hence allowing for selective growth of InAs quantum dots. Patterns of quantum dots are observed to form above the underlying nanostamped template. The strain state of the patterned structures is characterized by micro-Raman spectroscopy. The potential of using nanoprobe tips as a quantum dot nanofabrication technology are discussed.

Effects of N supply on the accumulation of photosynthetic pigments and photoprotectors in Gracilaria tenuistipitata (Rhodophyta) cultured under UV radiation

We have studied the effects of nitrate supply under photosynthetic active radiation (PAR) plus ultraviolet radiation (UVR) exposure on photosynthetic pigments (chlorophyll a and carotenoids), photoprotective UV screen mycosporine-like amino acids (MAAs), and photosynthetic parameters, including the maximum quantum yield (F(v)/F(m)) and electron transport rate (ETR) on the red agarophyte Gracilaria tenuistipitata. Apical tips of G. tenuistipitata were cultivated under ten different concentrations of NO(3)(-) for 7 days. It has been shown that G. tenuistipitata cultured under laboratory conditions has the ability to accumulate high amounts of MAAs following a nitrate concentration-dependent manner under PAR+UVR. Two MAAs were identified, shinorine and porphyra-334. The relative concentration of the first increased under high concentrations of nitrate, while the second one decreased. The presence of antheraxanthin is reported for the first time in this macro-algae, which also contains zeaxanthin, lutein, and beta-carotene. The accumulation of pigments, photoprotective compounds, and photosynthetic parameters of G. tenuistipitata is directly related to N availability. All variables decreased under low N supplies and reached constant maximum values with supplements higher than 0.5 mM NO(3)(-). Our results suggest a high potential to acclimation and photoprotection against stress factors (including high PAR and UVR) directly related to N availability for G. tenuistipitata.

Unusually short tandem repeats appear to reach chromosome ends of Rhynchosciara americana (Diptera: Sciaridae)

The characterisation of sequences at chromosome ends of Rhynchosciara americana was continued with the screening of a genomic library using as a probe a short repeat identified in a previous report (M-22, 22 bp) which was found to be specific for noncentromeric termini of this species. Simple repeats, complex tandem and apparently dispersed repeats were present in the genomic clones analysed. Repetitive sequences do not define individual chromosome tips as they were found in all noncentromeric ends. A novel and unusually short tandem repeat type for dipteran chromosome ends (named M-16) composed of 16 nucleotides and frequently associated with M-22 arrays was characterised in this work. Islands of M-16 and M-22 tandem repeats were found in all the genomic clones analysed. Individual probes representative of each repetitive element hybridised not only to all noncentromeric ends of R. americana chromosomes but also to inter-telomeric bridges. This contrasted with the other repeat types which displayed sub-telomeric localisation as seen by double detection of hybridised probe and telomeric reverse transcriptase. Some stretches composed of M-16 and M-22 tandem repeats localised in different regions of the analysed genomic clones were either identical or showed sequence similarity that was unexpectedly higher than the mean sequence similarity observed among repeats within each of their tandem arrays. The occurrence of segmental duplications, as deduced by sequence analyses involving the two repeats that appeared to reach chromosome ends, might indicate the involvement of this type of duplication process in the chromosome end maintenance in this species.

Baccharis scopulorum, a new species of section Caulopterae (Asteraceae: Astereae) from rocky cliffs of southern Brazil

A new species of Baccharis sect. Caulopterae endemic to rocky cliffs in southern Brazil, is here described as Baccharis scopulorum. This new species is characterized by the general presence of basal and persistent leaves, mostly solitary capitula born at the tips of the branches, and many flowered capitula, the pistillate capitula with an urceolate to campanulate involucres. The new species is morphologically most similar to B. altimontana and B. opuntioides, both inhabiting mountain summits in eastern Brazil. A description of B. scopulorum, together with illustrations, a distribution map, habitat description, conservation assessment and diagnostic comparison with B. altimontana and B. opuntioides is presented.

A new species of Moenkhausia from the rio Amazonas and rio Orinoco basins (Characiformes: Characidae)

A new species of Moenkhausia is described from the rio Amazonas and rio Orinoco basins. The new species can be distinguished from congeners mainly by the combination of a conspicuous, relatively small and circular humeral spot, a black spot on the upper caudal-fin lobe, lower caudal-fin lobe without spot or a faint one, and middle caudal-fin rays hyaline or with dark tips. Mature males have a unique combination of two large-sized bony hooks on the anal-fin rays and tiny spines on the distal portion of all fins, which distinguishes the new species from any other species of Characidae.

(65)Zn(2+) transport by isolated gill epithelial cells of the American lobster, Homarus americanus

Gills are the first site of impact by metal ions in contaminated waters. Work on whole gill cells and metal uptake has not been reported before in crustaceans. In this study, gill filaments of the American lobster, Homarus americanus, were dissociated in physiological saline and separated into several cell types on a 30, 40, 50, and 80% sucrose gradient. Cells from each sucrose solution were separately resuspended in physiological saline and incubated in (65)Zn(2+) in order to assess the nature of metal uptake by each cell type. Characteristics of zinc accumulation by each kind of cell were investigated in the presence and absence of 10 mM calcium, variable NaCl concentrations and pH values, and 100 mu M verapamil, nifedipine, and the calcium ionophore A23187. (65)Zn(2+) influxes were hyperbolic functions of zinc concentration (1-1,000 mu M) and followed Michaelis-Menten kinetics. Calcium reduced both apparent zinc binding affinity (K (m)) and maximal transport velocity (J (max)) for 30% sucrose cells, but doubled the apparent maximal transport velocity for 80% sucrose cells. Results suggest that calcium, sodium, and protons enter gill epithelial cells by an endogenous broad-specificity cation channel and trans-stimulate metal uptake by a plasma membrane carrier system. Differences in zinc transport observed between gill epithelial cell types appear related to apparent affinity differences of the transporters in each kind of cell. Low affinity cells from 30% sucrose were inhibited by calcium, while high affinity cells from 80% sucrose were stimulated. (65)Zn(2+) transport was also studied by isolated, intact, gill filament tips. These intact gill fragments generally displayed the same transport properties as did cells from 80% sucrose and provided support for metal uptake processes being an apical phenomenon. A working model for zinc transport by lobster gill cells is presented.

Molecular characterization of a retrotransposon in the Rhynchosciara americana genome and its association with telomere

Non-LTR retrotransposons, also known as long interspersed nuclear elements (LINEs), are transposable elements that encode a reverse transcriptase and insert into genomic locations via RNA intermediates. The sequence analysis of a cDNA library constructed from mRNA of the salivary glands of R. americana showed the presence of putative class I elements. The cDNA clone with homology to a reverse transcriptase was the starting point for the present study. Genomic phage was isolated and sequenced and the molecular structure of the element was characterized as being a non-LTR retrotransposable element. Southern blot analysis indicated that this transposable element is represented by repeat sequences in the genome of R. americana. Chromosome tips were consistently positive when this element was used as probe in in-situ hybridization. Real-time RT-PCR showed that this retrotransposon is transcribed at different periods of larval development. Most interesting, the silencing of this retrotransposon in R. americana by RNA interference resulted in reduced transcript levels and in accelerated larval development.

Comparison of two methods for collecting free-living ticks in the Amazonian forest

In the present study, we compared 2 methods for collecting ixodid ticks on the verges of animal trails in a primary Amazon forest area in northern Brazil. (i) Dragging: This method was based on passing a 1-m(2) white flannel over the vegetation and checking the flannel for the presence of caught ticks every 5-10 m. (ii) Visual search: This method consisted of looking for guesting ticks on the tips of leaves of the vegetation bordering animal trails in the forest. A total of 103 adult ticks belonging to 4 Amblyomma species were collected by the visual search method on 5 collecting dates, while only 44 adult ticks belonging to 3 Amblyomma species were collected by dragging on 5 other collecting dates. These values were statistically different (Mann-Whitney Test, P = 0.0472). On the other hand, dragging was more efficient for subadult ticks, since no larva or nymph was collected by visual search, whereas 18 nymphs and 7 larvae were collected by dragging. The visual search method proved to be suitable for collecting adult ticks in the Amazon forest: however, field studies should include a second method, such as dragging in order to maximize the collection of subadult ticks. Indeed, these 2 methods can be performed by a single investigator at the same time, while he/she walks on an animal trail in the forest. (C) 2010 Elsevier GmbH. All rights reserved.

Influence of light guide tip used in the photo-activation on degree of conversion and hardness of one nanofilled dental composite

The aim of this study was to evaluate the degree of conversion and hardness of a dental composite resin Filtek (TM) Z-350 (3M ESPE, Dental Products St. Paul, MN) photo-activated for 20 s of irradiation time with two different light guide tips, metal and polymer, coupled on blue LED Ultraled LCU (Dabi Atlante, SP, Brazil). With the metal light tip, power density was of 352 and with the polymer was of 456 mW/cm(2), respectively. Five samples (4 mm in diameter and 2mm in thickness-ISO 4049), were made for each Group evaluated. The measurements for DC (%) were made in a Nexus-470 FT-IR, Thermo Nicolet, E.U.A. Spectroscopy (FTIR). Spectra for both uncured and cured samples were analyzed using an accessory of reflectance diffuse. The measurements were recorded in absorbance operating under the following conditions: 32 scans, 4 cm(-1) resolution, 300-4000 cm(-1) wavelength. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm(-1)) against internal standard before and after curing of the sample: aromatic C-C (peak at 1610 cm(-1)). The Vickers hardness measurements (top and bottom surfaces) were performed in a universal testing machine (Buehler MMT-3 digital microhardness tester Lake Bluff, Illinois USA). A 50 gf load was used and the indenter with a dwell time of 30 s. The data were submitted to the test t Student at significance level of 5%. The mean values of degree of conversion for the polymer and metal light guide tip no were statistically different (p = 0.8389). The hardness mean values were no statistically significant different among the light guide tips (p = 0.6244), however, there was difference between top and bottom surfaces (p < 0.001). The results show that so much the polymer light tip as the metal light tip can be used for the photo-activation, probably for the low quality of the light guide tip metal.