Cladistic analysis of Hemirhipini with establishment of Propalaus gen. nov. (Coleoptera, Elateridae, agrypninae)

This article includes a cladistic analysis of the tribe Hemirhipini. Are included 20 Hemirhipini genera (sensu Casari-Chen 1994), Saltamartinus Casari (1996b) (Hemirhipini), 6 genera excluded from Hemirhipini and kept in Agrypninae (formerly Pyrophorinae) (Casari-Chen 1993) and also, Aphileus Candèze (1857), Pyrophorus Billberg (1820) and Thoramus Sharp (1877). The type-species of the majority of genera and all species of the American genera (except Saltamartinus viduus (Chevrolat 1867)) are included. This analysis demonstrates that 30 genera belong to Hemirhipini: Abiphis Fleutiaux (1926), Alaolacon Candèze (1865), Alaomorphus Hauser (1900), Alaus Eschscholtz (1829), Aliteus Candèze (1857), Anthracalaus Fairmaire (1888), Aphileus Candèze (1857), Austrocalais Neboiss (1967), Calais Castelnau (1836), Catelanus Fleutiaux (1942), Chalcolepidius Eschscholtz (1829), Chalcolepis Candèze (1857), Conobajulus Van Zwaluwenburg (1940), Coryleus Fleutiaux (1942), Cryptalaus Ôhira (1967), Eleuphemus Hyslop (1921), Eumoeus Candèze (1874), Fusimorphus Fleutiaux (1942), Hemirhipus Latreille (1829), Lacais Fleutiaux (1942), Lycoreus Candèze (1857), Mocquerysia Fleutiaux (1899), Neocalais Girard (1971), Pherhimius Fleutiaux (1942), Phibisa Fleutiaux (1942), Propalaus gen. nov., Pseudocalais Girard (1971), Saltamartinus Casari (1996), Tetrigus Candèze (1857) and Thoramus Sharp (1877). The species included in Alaus do not make a monophyletic group and Propalaus gen. nov. is established to include Alaus alicii (Pjatakowa 1941) and A. haroldi (Candèze 1878). A description of Propalaus gen. nov. (type-species: Chalcolepidius haroldi Candèze, 1878) and a new key to Hemirhipini genera are also presented.

A phylogenetic study of the subtribe Dicrepidiina (Elateridae, Elaterinae, Ampedini)

It is presented a cladistic analysis of the Dicrepidiina aiming to test the monophyletism of the subtribe and to establish the relationships among the genera. The subtribe is composed by 36 genera and all of them, except Asebis, Lamononia, Neopsephus, Semiotopsis and Spilomorphus were included in the analysis. Fifty two species, especially the type-species of each genus were studied: Achrestus flavocinctus (Candèze, 1859), A. venustus Champion, 1895, Adiaphorus gracilis Schwarz, 1901, A. ponticerianus Candèze, 1859, Anoplischiopsis bivittatus Champion, 1895, Anoplischius bicarinatus Candèze, 1859, A. conicus Candèze, 1900, A. haematopus Candèze, 1859, A. pyronotus Candèze, 1859, Atractosomus flavescens (Germar, 1839), Blauta cribraria (Germar, 1844), Calopsephus apicalis (Schwarz, 1903), Catalamprus angustus (Fleutiaux, 1902), Crepidius flabellifer (Erichson, 1847), C. resectus Candèze, 1859, Cyathodera auripilosus Costa, 1968, C. lanugicollis (Candèze, 1859), C. longicornis Blanchard, 1843, Dayakus angularis Candèze, 1893, Dicrepidius ramicornis (Palisot de Beauvois, 1805), Dipropus brasilianus (Germar, 1824), D. factuellus Candèze, 1859, D. laticollis (Eschscholtz, 1829), D. pinguis (Candèze, 1859), D. schwarzi (Becker, 1961), Elius birmanicus Candèze, 1893, E. dilatatus Candèze, 1878, Heterocrepidius gilvellus Candèze, 1859, H. ventralis Guérin-Méneville, 1838, Lampropsephus cyaneus (Candèze, 1878), Loboederus appendiculatus (Perty, 1830), Olophoeus gibbus Candèze, 1859, Ovipalpus pubescens Solier, 1851, Pantolamprus ligneus Candèze, 1896, P. mirabilis Candèze, 1896, P. perpulcher Westwood, 1842, Paraloboderus glaber Golbach, 1990, Proloboderus crassipes Fleutiaux, 1912, Propsephus beniensis (Candèze, 1859), P. cavifrons (Erichson, 1843), Pseudolophoeus guineensis (Candèze, 1881), Rhinopsephus apicalis (Schwarz, 1903), Sephilus formosanus Schwarz, 1912, S. frontalis Candèze, 1878, Singhalenus gibbus Candèze, 1892, S. taprobanicus Candèze, 1859, Sphenomerus antennalis Candèze, 1859, S. brunneus Candèze, 1865, Spilus atractomorphus Candèze, 1859, S. nitidus Candèze, 1859, Stenocrepidius simonii Fleutiaux, 1891 and Trielasmus varians Blanchard, 1846. Chalcolepidius zonatus (Hemirhipini, Agrypninae), Ctenicera silvatica (Prosternini, Prosterninae), and species of the other subtribes of Ampedini (Elaterinae): Ampedus sanguineus (Ampedina), Melanotus spernendus (Melanotina) and Anchastus digittatus and Physorhinus xanthocephalus (Physorhinina) were used as outgroups. The results of the phylogenetic analysis demonstrated that Dicrepidiina, as formerly defined, does not form a monophyletic group. One genus, represented by Ovipalpus pubescens, was removed from the subtribe. The subtribe is characterized by presence of lamella under 2nd and 3rd tarsomeres of all legs. Also, it was revealed that the genera Achrestus, Anoplischius, Dipropus and Propsephus are not monophyletic. Due to the scarcity of information, all the studied species are redescribed and illustrated.

NEAR INFRARED SPECTROSCOPY FOR ESTIMATING SUGARCANE BAGASSE CONTENT IN MEDIUM DENSITY FIBERBOARD

Medium density fiberboard (MDF) is an engineered wood product formed by breaking down selected lignin-cellulosic material residuals into fibers, combining it with wax and a resin binder, and then forming panels by applying high temperature and pressure. Because the raw material in the industrial process is ever-changing, the panel industry requires methods for monitoring the composition of their products. The aim of this study was to estimate the ratio of sugarcane (SC) bagasse to Eucalyptus wood in MDF panels using near infrared (NIR) spectroscopy. Principal component analysis (PCA) and partial least square (PLS) regressions were performed. MDF panels having different bagasse contents were easily distinguished from each other by the PCA of their NIR spectra with clearly different patterns of response. The PLS-R models for SC content of these MDF samples presented a strong coefficient of determination (0.96) between the NIR-predicted and Lab-determined values and a low standard error of prediction (similar to 1.5%) in the cross-validations. A key role of resins (adhesives), cellulose, and lignin for such PLS-R calibrations was shown. PLS-DA model correctly classified ninety-four percent of MDF samples by cross-validations and ninety-eight percent of the panels by independent test set. These NIR-based models can be useful to quickly estimate sugarcane bagasse vs. Eucalyptus wood content ratio in unknown MDF samples and to verify the quality of these engineered wood products in an online process.

A produção social do conhecimento na sociedade da informação

This work is an approach to some problems and challenges to a contemporary social construction of knowledge from some paradoxes generated around the concepts of knowledge, information, culture and information society. The article proposes to think over problems about a common sense concept which is that the technologies would automatically release the man from repetitive work and would allow the access to information and knowledge. In this sense, it points out to the importance of cultural mediation and information activities in the field of Information Science.

Fluorescence images combined to statistic test for fingerprinting of citrus plants after bacterial infection

The citrus greening (or huanglongbing) disease has caused serious problems in citrus crops around the world. An early diagnostic method to detect this malady is needed due to the rapid dissemination of Candidatus Liberibacter asiaticus (CLas) in the field. This analytical study investigated the fluorescence responses of leaves from healthy citrus plants and those inoculated with CLas by images from a stereomicroscope and also evaluated their potential for the early diagnosis of the infection caused by this bacterium. The plants were measured monthly, and the evolution of the bacteria on inoculated plants was monitored by real-time quantitative polymerase chain reaction (RT-qPCR) amplification of CLas sequences. A statistical method was used to analyse the data. The selection of variables from histograms of colours (colourgrams) of the images was optimized using a paired Student's t-test. The intensity of counts for green colours from images of fluorescence had clearly minor variations for healthy plants than diseased ones. The darker green colours were the indicators of healthy plants and the light colours for the diseased. The method of fluorescence images is novel for fingerprinting healthy and diseased plants and provides an alternative to the current method represented by PCR and visual inspection. A new, non-subjective pattern of analysis and a non-destructive method has been introduced that can minimize the time and costs of analyses.

Shallow landslide prediction in the Serra do Mar, Sao Paulo, Brazil

Various methods are currently used in order to predict shallow landslides within the catchment scale. Among them, physically based models present advantages associated with the physical description of processes by means of mathematical equations. The main objective of this research is the prediction of shallow landslides using TRIGRS model, in a pilot catchment located at Serra do Mar mountain range, Sao Paulo State, southeastern Brazil. Susceptibility scenarios have been simulated taking into account different mechanical and hydrological values. These scenarios were analysed based on a landslide scars map from the January 1985 event, upon which two indexes were applied: Scars Concentration (SC - ratio between the number of cells with scars, in each class, and the total number of cells with scars within the catchment) and Landslide Potential (LP - ratio between the number of cells with scars, in each class, and the total number of cells in that same class). The results showed a significant agreement between the simulated scenarios and the scar's map. In unstable areas (SF <= 1), the SC values exceeded 50% in all scenarios. Based on the results, the use of this model should be considered an important tool for shallow landslide prediction, especially in areas where mechanical and hydrological properties of the materials are not well known.

CHARACTERIZATION OF THE TREE COMPONENT IN A SEMIDECIDUOUS FOREST IN THE ESPINHACO RANGE: A SUBSIDY TO CONSERVATION

This study was conducted in the Private Reserve Mata do Jambreiro (912 ha), localized in the Iron Quadrangle, Minas Gerais, southeastern portion of the Espinhaco Range, which is predominantly covered by semideciduous seasonal montane forest. Three topographically and physiognomic similar areas located within a continuum forest fragment, distant by 1.3 to 1.5 km were sampled by the point-quadrat method. In each area, 30 points were marked. Individuals with a minimum perimeter at the breast height (PBH) of 15 cm were sampled, totaling 111 species belonging to 40 families. The most representative family was Fabaceae, with 14.29% of the total number of species. Low floristic similarity (5.3% to 34.4%) was observed between the areas, pointing out the importance of distribution of sample units in continuous fragments. Shannon diversity index (H') found was 4.22 and Pielou equability (J) 0.894. Soil analysis showed some differences in chemical composition between the three studied areas and was an important component for the interpretation of the floristic variation found. The low floristic similarity observed here for close areas justify the requirement of more detailed inventories by Brazilian Environmental Agencies for the legal authorization procedures prior to the establishment of new enterprising projects. Also, the professionals that conduct rapid inventories, mainly the Environmental Consultants, should give more attention to this kind of floristic variation and to the methods used to inventory complex forests.

Development and validation of a fast RP-HPLC method to determine the analogue of the thyroid hormone, 3,5,3 '-triiodothyroacetic acid (TRIAC), in polymeric nanoparticles

The objective of this work was to develop and validate a rapid Reversed-Phase High-Performance Liquid Chromatography method for the quantification of 3,5,3 '-triiodothyroacetic acid (TRIAC) in nanoparticles delivery system prepared in different polymeric matrices. Special attention was given to developing a reliable reproductive technique for the pretreatment of the samples. Chromatographic runs were performed on an Agilent 1200 Series HPLC with a RP Phenomenex (R) Gemini C18 (150 x 4, 6 mm i.d., 5 mu m) column using acetonitrile and triethylamine buffer 0.1% (TEA) (40 : 60 v/v) as a mobile phase in an isocratic elution, pH 5.6 at a flow rate of 1 ml min(-1). TRIAC was detected at a wavelength of 220 nm. The injection volume was 20 mu l and the column temperature was maintained at 35 degrees C. The validation characteristics included accuracy, precision, specificity, linearity, recovery, and robustness. The standard curve was found to have a linear relationship (r(2) - 0.9996) over the analytical range of 5-100 mu g ml(-1) . The detection and quantitation limits were 1.3 and 3.8 mu g ml(-1), respectively. The recovery and loaded TRIAC in colloidal system delivery was nearly 100% and 98%, respectively. The method was successfully applied in polycaprolactone, polyhydroxybutyrate, and polymethylmethacrylate nanoparticles.

Ionic mobility of the solvated proton and acid-base titration in a four-compartment capillary electrophoresis system

Although H(+) and OH(-) are the most common ions in aqueous media, they are not usually observable in capillary electrophoresis (CE) experiments, because of the extensive use of buffer solutions as the background electrolyte. In the present work, we introduce CE equipment designed to allow the determination of such ions in a similar fashion as any other ion. Basically, it consists of a four-compartment piece of equipment for electrolysis-separated experiments (D. P. de Jesus et at, Anal. Chem., 2005, 77, 607). In such a system, the ends of the capillary are placed in two reservoirs, which are connected to two other reservoirs through electrolyte-filled tubes. The electrodes of the high-voltage power source are positioned in these reservoirs. Thus, the electrolysis products are kept away from the inputs of the capillary. The detection was provided by two capacitively coupled contactless conductivity detectors (CD), each one positioned about 11 cm from the end of the capillary. Two applications were demonstrated: titration-like procedures for nanolitre samples and mobility measurements. Strong and weak acids (pK(a) < 5), pure or mixtures, could be titrated. The analytical curve is linear from 50 mu M up to 10 mM of total dissociable hydrogen (r = 0.99899 for n =10) in 10-nL samples. By including D(2)O in the running electrolyte, we could demonstrate how to measure the mixed proton/deuteron mobility. When H(2)O/D(2)O (9 : 1 v/v) was used as the solvent, the mobility was 289.6 +/- 0.5 x 10(-5) cm(2) V(-1) s(-1). Due to the fast conversion of the species, this value is related to the overall behaviour of all isotopologues and isotopomers of the Zundel and Eigen structures, as well as the Stokesian mobility of proton and deuteron. The effect of neutral (o-phenanthroline) and negatively charged (chloroacetate) bases and aprotic solvent (DMSO) over the H(+) mobility was also demonstrated.

Method for cadmium and lead longitudinal profiles determination in hair by solid sampling graphite furnace atomic absorption spectrometry

This paper describes methods for the direct determination of Cd and Pb in hair segments (c.a. 5 mm similar to 80 mu g) by solid sampling graphite furnace atomic absorption spectrometry, becoming possible longitudinal profiles in a single strand of hair. To distinguish endogenous and exogenous content. strands of hair were washed by using two different procedures: IAEA protocol (acetone + water + acetone) and the combination of IAEA protocol with HCl washing (acetone + water + acetone + 0.1 mol l(-1) HCl). The concentration of Cd and Pb increased from the root Until the tip of hair washed according to IAEA protocol. However, when the strand of hair was washed using the combination of IAEA protocol and 0.1 mol l(-1) HCl, Cd concentrations decreased in all segments, and Pb concentrations decreased drastically near to the root (5 to 12 mm) and was systematically higher ill the end. The proposed method showed to be useful to assess the temporal variation to Cd and Pb exposure and call be Used for toxicological and environmental investigations. The limits of detection were 2.8 ng g(-1) for Cd and 40 ng g(-1) for Pb. The characteristic masses based oil integrated absorbance were 2.4 pg for Cd and 22 pg for Pb.

Cloud point extraction to avoid interferences by structured background on nickel determination in plant materials by FAAS

An analytical procedure based on microwave-assisted digestion with diluted acid and a double cloud point extraction is proposed for nickel determination in plant materials by flame atomic absorption spectrometry. Extraction in micellar medium was successfully applied for sample clean up, aiming to remove organic species containing phosphorous that caused spectral interferences by structured background attributed to the formation of PO species in the flame. Cloud point extraction of nickel complexes formed with 1,2-thiazolylazo-2-naphthol was explored for pre-concentration, with enrichment factor estimated as 30, detection limit of 5 mu g L(-1) (99.7% confidence level) and linear response up to 80 mu g L(-1). The accuracy of the procedure was evaluated by nickel determinations in reference materials and the results agreed with the certified values at the 95% confidence level.

Quantification of some nonsteroidal anti-inflammatory drugs as reducing agents of Cu(II)/4,4 '-dicarboxy-2,2 '-biquinoline complexes in cationic micellar medium

A simple method was developed for spectrophotometric determination of some nonsteroidal anti-inflammatory drugs (meloxicam, piroxicam and tenoxicam) based on the reduction of copper(II) in buffered solution (pH 7.0) and micellar medium containing 4,4'-dicarboxy-2,2'-buffered solution (pH 7.0) and micellar medium containing 4,4'-dicarboxy-2,2'-biquinoline acid. The-biquinoline acid. The absorbance values at 558 nm, characteristic of the formed Cu(I)/4,4'-dicarboxy-2,2'-biquinoline complexes, are linear with the concentrations (5.7-40 mmol L(-1), n = 5) of these oxicams (meloxicam r = 0.998; piroxicam and tenoxicam r = 0.999). The limit of detection values, in mmol L(-1), calculated for meloxicam (2.7), piroxicam (1.2) and tenoxicam (1.3) was obtained with 99% confidence level and the relative standard deviations for meloxicam (3.1%), piroxicam (5.1%) and tenoxicam (1.2%) were calculated using a 25 mmol L(-1) solution (n = 7). Mean recovery values for meloxicam, piroxicam and tenoxicam forms were 100 +/- 6.9, 98.6 +/- 3.6 and 99.4 +/- 2.5%, respectively. The conditional potential of Cu(II)/Cu(I) in complex medium of 7.5 mmol L(-1) BCA was determined to be 629 +/- 11 mV vs. NHE.

Simultaneous determination of Cr, Fe, Ni and V in crude oil by emulsion sampling graphite furnace atomic absorption spectrometry

In this work a simple and reliable method for the simultaneous determination of Cr, Fe, Ni and V in crude oil, using emulsion sampling graphite furnace atomic absorption spectrometry is proposed. Under the best conditions, sample masses around 50 mg were weighed in polypropylene tubes and emulsified in a mixture of 0.5% (v v(-1)) hexane + 6% (m v(-1)) Triton X-100 (R). Considering the compromised conditions, the pyrolysis an atomization temperatures for the simultaneous determination of Cr, Fe, Ni and V were 1400 degrees C and 2500 degrees C, respectively. Aliquots of 20 mu L of reference solution and sample emulsion were co-injected into the graphite tube with 10 mu L of 1.0 g L(-1) Mg(NO(3))(2) as chemical modifier. The detection limits (n = 10, 3 sigma) and characteristic masses were, respectively: 0.07 mu g g(-1) and 19 pg for Cr; 2.15 mu g g(-1) and 31 pg for Fe; 1.25 mu g g(-1) and 44 pg for Ni; and 1.15 mu g g(-1) and 149 pg for V. The reliability of the proposed method was checked by fuel oil Standard Reference Material (SRMTriton X-100 (R) 1634c - NIST) analysis. The concentrations found presented no statistical differences compared to the certified values at 95% confidence level.

Flow injection analysis of paracetamol using a biomimetic sensor as a sensitive and selective amperometric detector

This work describes the coupling of a biomimetic sensor to a flow injection system for the sensitive determination of paracetamol. The sensor was prepared as previously described in the literature (M. D. P. T. Sotomayor, A. Sigoli, M. R. V. Lanza, A. A. Tanaka and L. T. Kubota, J. Braz. Chem. Soc., 2008, 19, 734) by modifying a glassy carbon electrode surface with a Nafion (R) membrane doped with iron tetrapyridinoporphyrazine (FeTPyPz), a biomimetic catalyst of the P450 enzyme. The performance of the sensor for paracetamol detection was investigated and optimized in a flow injection system (FIA) using a wall jet electrochemical cell. Under optimized conditions a wide linear response range (1.0 x 10(-5) to 5.0 x 10(-2) mol L(-1)) was obtained, with a sensitivity of 2579 (+/- 129) mu A L mu mol(-1). The detection and quantification limits of the sensor for paracetamol in the FIA system were 1.0 and 3.5 mu mol L(-1), respectively. The analytical frequency was 51 samples h(-1), and over a period of five days (320 determinations) the biosensor maintained practically the same response. The system was successfully applied to paracetamol quantification in seven pharmaceutical formulations and in water samples from six rivers in Sao Paulo State, Brazil.