Measurement of the Parity-Violating Longitudinal Single-Spin Asymmetry for W(+/-) Boson Production in Polarized Proton-Proton Collisions at root s=500 GeV

We report the first measurement of the parity-violating single-spin asymmetries for midrapidity decay positrons and electrons from W(+) and W(-) boson production in longitudinally polarized proton-proton collisions at root s = 500 GeV by the STAR experiment at RHIC. The measured asymmetries, A(L)(W+) = -0.27 +/- 0.10(stat.) +/- 0.02(syst.) +/- 0.03(norm.) and A(L)(W-) = 0.14 +/- 0.19(stat.) +/- 0.02(syst.) +/- 0.01(norm.), are consistent with theory predictions, which are large and of opposite sign. These predictions are based on polarized quark and antiquark distribution functions constrained by polarized deep-inelastic scattering measurements.

Measurement of the Bottom Quark Contribution to Nonphotonic Electron Production in p plus p Collisions at root s=200 GeV

The contribution of B meson decays to nonphotonic electrons, which are mainly produced by the semileptonic decays of heavy-flavor mesons, in p + p collisions at root s = 200 GeV has been measured using azimuthal correlations between nonphotonic electrons and hadrons. The extracted B decay contribution is approximately 50% at a transverse momentum of p(T) >= 5 GeV/c. These measurements constrain the nuclear modification factor for electrons from B and D meson decays. The result indicates that B meson production in heavy ion collisions is also suppressed at high p(T).

Three-Particle Coincidence of the Long Range Pseudorapidity Correlation in High Energy Nucleus-Nucleus Collisions

We report the first three-particle coincidence measurement in pseudorapidity (Delta eta) between a high transverse momentum (p(perpendicular to)) trigger particle and two lower p(perpendicular to) associated particles within azimuth |Delta phi| < 0.7 in root s(NN) = 200 GeV d + Au and Au + Au collisions. Charge ordering properties are exploited to separate the jetlike component and the ridge (long range Delta eta correlation). The results indicate that the correlation of ridge particles are uniform not only with respect to the trigger particle but also between themselves event by event in our measured Delta eta. In addition, the production of the ridge appears to be uncorrelated to the presence of the narrow jetlike component.

A note on the likelihood and moments of the skew-normal distribution

In this paper an alternative approach to the one in Henze (1986) is proposed for deriving the odd moments of the skew-normal distribution considered in Azzalini (1985). The approach is based on a Pascal type triangle, which seems to greatly simplify moments computation. Moreover, it is shown that the likelihood equation for estimating the asymmetry parameter in such model is generated as orthogonal functions to the sample vector. As a consequence, conditions for a unique solution of the likelihood equation are established, which seem to hold in more general setting.

Contribution to dynamic characteristics of the cutting temperature in the drilling process considering one dimension heat flow

The machining of hardened steels has always been a great challenge in metal cutting, particularly for drilling operations. Generally, drilling is the machining process that is most difficult to cool due to the tool`s geometry. The aim of this work is to determine the heat flux and the coefficient of convection in drilling using the inverse heat conduction method. Temperature was assessed during the drilling of hardened AISI H13 steel using the embedded thermocouple technique. Dry machining and two cooling/lubrication systems were used, and thermocouples were fixed at distances very close to the hole`s wall. Tests were replicated for each condition, and were carried out with new and worn drills. An analytical heat conduction model was used to calculate the temperature at tool-workpiece interface and to define the heat flux and the coefficient of convection. In all tests using new and worn out drills, the lowest temperatures and decrease of heat flux were observed using the flooded system, followed by the MQL, considering the dry condition as reference. The decrease of temperature was directly proportional to the amount of lubricant applied and was significant in the MQL system when compared to dry cutting. (C) 2011 Elsevier Ltd. All rights reserved.

Performance of the Equivalent Reservoir Modelling Technique for Multi-Reservoir Hydropower Systems

This paper investigates the validity of a simplified equivalent reservoir representation of a multi-reservoir hydroelectric system for modelling its optimal operation for power maximization. This simplification, proposed by Arvanitidis and Rosing (IEEE Trans Power Appar Syst 89(2):319-325, 1970), imputes a potential energy equivalent reservoir with energy inflows and outflows. The hydroelectric system is also modelled for power maximization considering individual reservoir characteristics without simplifications. Both optimization models employed MINOS package for solution of the non-linear programming problems. A comparison between total optimized power generation over the planning horizon by the two methods shows that the equivalent reservoir is capable of producing satisfactory power estimates with less than 6% underestimation. The generation and total reservoir storage trajectories along the planning horizon obtained by equivalent reservoir method, however, presented significant discrepancies as compared to those found in the detailed modelling. This study is motivated by the fact that Brazilian generation system operations are based on the equivalent reservoir method as part of the power dispatch procedures. The potential energy equivalent reservoir is an alternative which eliminates problems with the dimensionality of state variables in a dynamic programming model.

Knowledge transfer in product development processes: A case study in small and medium enterprises (SMEs) of the metal-mechanic sector from Sao Paulo, Brazil

This paper reports a research that evaluated the product development methodologies used in Brazilian small and medium-sized metal-mechanic enterprises (SMEs), in a specific region of Sao Paulo. The tool used for collecting the data was a questionnaire, which was developed and applied through interviews conducted by the researchers in 32 companies. The main focus of this paper can be condensed in the synthesis-question ""Is only the company responsible for the development?"" which was analyzed thoroughly. The results obtained from this analysis were evaluated directly (through the respective percentages of answers) and statistically (through the search of an index which demonstrates if two questions are related). The results point to a degree of maturity in SMEs, which allows product development to be conducted in cooperation networks. (C) 2007 Elsevier Ltd. All rights reserved.

Scheduling in a two-machine flowshop for the minimization of the mean absolute deviation from a common due date

This paper addresses the minimization of the mean absolute deviation from a common due date in a two-machine flowshop scheduling problem. We present heuristics that use an algorithm, based on proposed properties, which obtains an optimal schedule fora given job sequence. A new set of benchmark problems is presented with the purpose of evaluating the heuristics. Computational experiments show that the developed heuristics outperform results found in the literature for problems up to 500 jobs. (C) 2007 Elsevier Ltd. All rights reserved.

Effects of the preventive and corrective adjustments in economical designs for online process control for attributes with misclassification errors

The procedure for online process control by attributes consists of inspecting a single item at every m produced items. It is decided on the basis of the inspection result whether the process is in-control (the conforming fraction is stable) or out-of-control (the conforming fraction is decreased, for example). Most articles about online process control have cited the stoppage of the production process for an adjustment when the inspected item is non-conforming (then the production is restarted in-control, here denominated as corrective adjustment). Moreover, the articles related to this subject do not present semi-economical designs (which may yield high quantities of non-conforming items), as they do not include a policy of preventive adjustments (in such case no item is inspected), which can be more economical, mainly if the inspected item can be misclassified. In this article, the possibility of preventive or corrective adjustments in the process is decided at every m produced item. If a preventive adjustment is decided upon, then no item is inspected. On the contrary, the m-th item is inspected; if it conforms, the production goes on, otherwise, an adjustment takes place and the process restarts in-control. This approach is economically feasible for some practical situations and the parameters of the proposed procedure are determined minimizing an average cost function subject to some statistical restrictions (for example, to assure a minimal levelfixed in advanceof conforming items in the production process). Numerical examples illustrate the proposal.

IDENTIFICATION OF THE STATE OF A WET SPOUTED BED THROUGH TIME-FREQUENCY ANALYSIS OF PRESSURE FLUCTUATION TIME SERIES

The feasibility of detecting instability in wet spouted beds via pressure fluctuation (PF) time-series analyses was investigated. Experiments were carried out in a cylindrical Plexiglas column of diameter 150 mm with a conical base of internal angle 60 degrees, an inlet orifice diameter of 25 mm and glass beads of diameter 2.4 mm. Transducers at several axial positions measured PF time series with incremental addition of aqueous sucrose solutions of different concentrations. Liquid addition affected the spouted bed dynamics, causing irregular spouting, increased voidage in the annulus, increased fountain height, irregular annulus height, channelling, agglomeration, and adhesion of particles to the column walls. Autocorrelations indicated the appearance of periodicities in the PF signals with increasing sucrose addition. Dominant peaks in power-spectral density developed at low frequencies with changing system dynamics. The results indicate that PF signals furnish relevant information on system dynamics, useful for monitoring and control of spouted bed operations such as particle coating and drying of paste-like materials.

In the eye of the storm: exploring the introduction of environmental issues in the production function in Brazilian companies

This article aims to analyse the introduction of environmental issues in the context of the production function, which has been referred to as the organisational area to lead corporate environmental management. With that purpose, the theoretical references for corporate environmental management and the necessary alterations in production function have been organised to include environmental aspects, especially in terms of product and process development, quality management, and logistics. Considering that this research field still lacks empirical evidence for Brazilian companies, four case studies were conducted using companies located in the country. The environmental management maturity level of those companies tends to follow the rate with which the environmental issue is introduced in production sub-areas, especially in the product development process. However, in most cases we found that the companies had difficulties in structuring the insertion of the environmental dimension in logistics. The final notes point out the distance observed between what is recommended by international literature and the reality of Brazilian companies in the challenge of making the production function environmentally friendly.

Population demography and spatial distribution of the mantis shrimp Squilla biformis (Stomatopoda, Squillidae) from Pacific Costa Rica

The mantis shrimp Squilla biformis is the most conspicuous and abundant stomatopod captured during benthic trawling operations off the Pacific coast of Costa Rica. Due to its abundance, this species is considered a potential fisheries resource for the region. Nevertheless, its life history is practically unknown. The present study describes the population demography, spatial distribution and behaviour of S. biformis from Pacific Costa Rica. The population was principally composed of individuals between 20 and 32 mm carapace length (CL), forming 2 age groups. Individuals of 35 to 45 mm CL and > 45 mm CL were poorly represented. We assume that larger individuals are more frequent at greater depths (probably on the continental slope), thus out of the reach of the fishing vessels used in our study. Males outnumbered females, as observed in other stomatopods. Visual evidence of their behaviour demonstrates that the adults in this species possess a benthic and pelagic life style. Largest numbers of individuals (50% of the total) were found between 240 to 260 m, the same bathymetric range that was historically occupied by commercial shrimps. This shift may be related to intense fishing activities. We observed a synchronized moulting of females and males during less luminous (third and fourth) lunar phases. The evolutionary development of a group moulting system could confer advantages to S. biformis in comparison to other stomatopods whose moulting process is individual and asynchronous.

Surgical Treatment of Morbid Obesity: Mid-term Outcomes of the Laparoscopic Ileal Interposition Associated to a Sleeve Gastrectomy in 120 Patients

The aim of this study was to evaluate the mid-term outcomes of the laparoscopic ileal interposition associated to a sleeve gastrectomy (LII-SG) for the treatment of morbid obesity. The procedure was performed in 120 patients: 71 women and 49 men with mean age of 41.4 years. Mean body mass index (BMI) was 43.4 +/- 4.2 kg/m(2). Patients had to meet requirements of the 1991 NIH conference criteria for bariatric operations. Associated comorbidities were observed in all patients, including dyslipidemia in 51.7%, hypertension in 35.8%, type 2 diabetes in 15.8%, degenerative joint disease in 55%, gastroesophageal reflux disease in 36.7%, sleep apnea in 10%, and cardiovascular problems in 5.8%. Mean follow-up was 38.4 +/- 10.2 months, range 25.2-61.1. There was no conversion to open surgery nor operative mortality. Early major complications were diagnosed in five patients (4.2%). Postoperatively, 118 patients were evaluated. Late major complications were observed in seven patients (5.9%). Reoperations were performed in six (5.1%). Mean postoperative BMI was 25.7 +/- 3.17 kg/m(2), and 86.4% were no longer obese. Mean %EWL was 84.5 +/- 19.5%. Hypertension was resolved in 88.4% of the patients, dyslipidemia in 82.3%, and T2DM in 84.2%. The LII-SG provided an adequate weight loss and resolution of associated diseases during mid-term outcomes evaluation. There was an acceptable morbidity with no operative mortality. It seems that chronic ileal brake activation determined sustained reduced food intake and increased satiety over time. LII-SG could be regularly used as a surgical alternative for the treatment of morbid obesity.

The Incapacity of the Surgeon to Identify NASH in Bariatric Surgery Makes Biopsy Mandatory

Nonalcoholic steatohepatitis (NASH) is a morbid condition highly related to obesity. It is unclear if the macroscopic liver appearance correlates with the histopathologic findings. The goal of this prospective study was to determine the relationship between the intraoperative liver appearance and the histopathologic diagnosis of NASH in morbidly obese subjects undergoing bariatric surgery. We also aimed to determine variables that could predict NASH preoperatively. Consecutive 51 subjects undergoing bariatric surgery without evidence of other liver disease underwent intraoperative liver biopsy. An intraoperative liver visual (macroscopic and tactile examination) was recorded. The liver aspect was compared with the liver histologic findings. Histological assessment was categorized into two groups: NASH and non-NASH (including normal histology and simple steatosis). Clinical and biochemical parameters were obtained from the patient databases and were compared between groups to identify preoperatively predictive factors of NASH. From 51 patients, only one presented totally normal histology. Forty-three (86.2%) presented simple steatosis, and seven (13.7%) were classified as NASH. Clinical parameters were not different between groups. At biochemical analysis, only VLDL cholesterol level was significantly higher in the NASH group (p = 0.037) but yet within the normal range. Association between macroscopic liver appearance and the presence of histological NASH is poor (sensitivity of 14%, specificity of 56%, positive predictive value of 5%, and negative predictive value of 80%). No predictor of NASH was found. Surgeons` evaluation could not identify NASH individuals. Routine liver biopsy during bariatric operations is mandatory to differentiate NASH and nonalcoholic fatty liver disease.

A Precise Formulation of the Third Law of Thermodynamics

The third law of thermodynamics is formulated precisely: all points of the state space of zero temperature I""(0) are physically adiabatically inaccessible from the state space of a simple system. In addition to implying the unattainability of absolute zero in finite time (or ""by a finite number of operations""), it admits as corollary, under a continuity assumption, that all points of I""(0) are adiabatically equivalent. We argue that the third law is universally valid for all macroscopic systems which obey the laws of quantum mechanics and/or quantum field theory. We also briefly discuss why a precise formulation of the third law for black holes remains an open problem.