Low-frequency noise and static analysis of the impact of the TiN metal gate thicknesses on n- and p-channel MuGFETs

The impact of the titanium nitride (TIN) gate electrode thickness has been investigated in n and p channel SOI multiple gate field effect transistors (MuGFETs) through low frequency noise charge pumping and static measurements as well as capacitance-voltage curves The results suggest that a thicker TIN metal gate electrode gives rise to a higher EOT a lower mobility and a higher interface trap density The devices have also been studied for different back gate biases where the GIFBE onset occurs at lower front-gate voltage for thinner TIN metal gate thickness and at higher V(GF) In addition it is demonstrated that post deposition nitridation of the MOCVD HfSiO gate dielectric exhibits an unexpected trend with TIN gate electrode thickness where a continuous variation of EOT and an increase on the degradation of the interface quality are observed (C) 2010 Elsevier Ltd All rights reserved

Analyzing static three-dimensional elastic domains with a new infinite boundary element formulation

A new two-dimensionally mapped infinite boundary element (IBE) is presented. The formulation is based on a triangular boundary element (BE) with linear shape functions instead of the quadrilateral IBEs usually found in the literature. The infinite solids analyzed are assumed to be three-dimensional, linear-elastic and isotropic, and Kelvin fundamental solutions are employed. One advantage of the proposed formulation over quadratic or higher order elements is that no additional degrees of freedom are added to the original BE mesh by the presence of the IBEs. Thus, the IBEs allow the mesh to be reduced without compromising the accuracy of the result. Two examples are presented, in which the numerical results show good agreement with authors using quadrilateral IBEs and analytical solutions. (C) 2010 Elsevier Ltd. All rights reserved.

Exact Search Directions for Optimization of Linear and Nonlinear Models Based on Generalized Orthonormal Functions

A novel technique for selecting the poles of orthonormal basis functions (OBF) in Volterra models of any order is presented. It is well-known that the usual large number of parameters required to describe the Volterra kernels can be significantly reduced by representing each kernel using an appropriate basis of orthonormal functions. Such a representation results in the so-called OBF Volterra model, which has a Wiener structure consisting of a linear dynamic generated by the orthonormal basis followed by a nonlinear static mapping given by the Volterra polynomial series. Aiming at optimizing the poles that fully parameterize the orthonormal bases, the exact gradients of the outputs of the orthonormal filters with respect to their poles are computed analytically by using a back-propagation-through-time technique. The expressions relative to the Kautz basis and to generalized orthonormal bases of functions (GOBF) are addressed; the ones related to the Laguerre basis follow straightforwardly as a particular case. The main innovation here is that the dynamic nature of the OBF filters is fully considered in the gradient computations. These gradients provide exact search directions for optimizing the poles of a given orthonormal basis. Such search directions can, in turn, be used as part of an optimization procedure to locate the minimum of a cost-function that takes into account the error of estimation of the system output. The Levenberg-Marquardt algorithm is adopted here as the optimization procedure. Unlike previous related work, the proposed approach relies solely on input-output data measured from the system to be modeled, i.e., no information about the Volterra kernels is required. Examples are presented to illustrate the application of this approach to the modeling of dynamic systems, including a real magnetic levitation system with nonlinear oscillatory behavior.

Energy gain induced by boundary crisis

We consider a nonlinear system and show the unexpected and surprising result that, even for high dissipation, the mean energy of a particle can attain higher values than when there is no dissipation in the system. We reconsider the time-dependent annular billiard in the presence of inelastic collisions with the boundaries. For some magnitudes of dissipation, we observe the phenomenon of boundary crisis, which drives the particles to an asymptotic attractive fixed point located at a value of energy that is higher than the mean energy of the nondissipative case and so much higher than the mean energy just before the crisis. We should emphasize that the unexpected results presented here reveal the importance of a nonlinear dynamics analysis to explain the paradoxical strategy of introducing dissipation in the system in order to gain energy.

An alternative multi-region BEM technique for three-dimensional elastic problems

The main objective of this work is to present an alternative boundary element method (BEM) formulation for the static analysis of three-dimensional non-homogeneous isotropic solids. These problems can be solved using the classical boundary element formulation, analyzing each subregion separately and then joining them together by introducing equilibrium and displacements compatibility. Establishing relations between the displacement fundamental solutions of the different domains, the alternative technique proposed in this paper allows analyzing all the domains as one unique solid, not requiring equilibrium or compatibility equations. This formulation also leads to a smaller system of equations when compared to the usual subregion technique, and the results obtained are even more accurate. (C) 2008 Elsevier Ltd. All rights reserved.

Transport-Regional Equity Issue Revisited

Almeida E. S. de, Haddad E. A. and Hewings G. J. D. Transport-regional equity issue revisited, Regional Studies. The objective of this paper is to analyse the relationship between transport and regional equity in Minas Gerais, Brazil. Furthermore, the existence of a trade-off between economic performance and regional equity is investigated as well. To do so, the paper develops a spatial computable general equilibrium model based on Brocker and Schneider`s approach of 2002 to implement comparative static analysis, explicitly incorporating iceberg transportation costs. Four activities are modelled, namely production, final demand, transportation and exports. Two production factors are assumed: labour and other factors. The model has 12 domestic regions and three external regions. Four counterfactual experiments are developed based on decreases in transportation costs due to a `distance shortening`. The main findings indicate that if the transport infrastructure improvement is focused only among poor regions, the promotion of regional equity is insignificant. If the transport infrastructure improvement links are concentrated among rich regions, there is an increase in regional income inequalities. However, if the improvements are targeted to the roads linking poor regions and rich ones, there is greater promotion of regional equity. The same result will occur when improvements are made to all road links of the state. [image omitted] Almeida E. S. de, Haddad E. A. et Hewings G. J. D. La question du rapport entre le transport et l`equilibre regional vue sous un jour nouveau, Regional Studies. Cet article cherche a analyser le rapport entre le transport et l`equilibre regional en Minas Gerais au Bresil. En outre, on examine la presence d`un echange entre la performance economoique et l`equilibre regional. Pour le faire, on construit un modele geographique de l`equilibre general a utiliser sur ordinateur fonde sur l`approche de Brockner et Schneider en 2002 afin de mettre en oeuvre une analyse statique comparative qui comprend explicitement les frais de transport iceberg. On modelise quatre activites, a savoir, la production, la demande finale, le transport et l`exportation. On fait deux suppositions quant aux facteurs de production: la main-d`oevre et d`autres facteurs. Le modele embrasse douze regions internes et trois regions externes. On fait quatre experiences paradoxales fondees sur la baisse des frais de transport due a une `reduction des distances`. Les principaux resultats indiquent que si l`amelioration de l`equipement de transport ne porte que sur les regions defavorisees, la promotion de l`equilibre regional s`avere negligeable. Si l`amelioration de l`equipement de transport focalise les regions riches, il s`avere un creusement des ecarts des revenus regionaux. Cependant, si les ameliorations ciblent les routes qui relient les regions defavorisees aux regions riches, il s`avere une plus grande promotion de l`equilibre regional. Il en va de meme pour la situation ou on a apporte des amenagements a toutes les liaisons routieres de l`etat. Modele geographique de l`equilibre general a utiliser sur ordinateur Equilibre regional Peformance economique Frais de transport Almeida E. S. de, Haddad E. A. und Hewings G. J. D. Die Wiederaufnahme der Frage von Verkehrswesen im Verhaltnis zu regionaler Fairness, Regional Studies. Dieser Aufsatz beabsichtigt, die Beziehung zwischen Verkehrswesen und regionaler Fairness in Minas Gerais (Brasilien) zu analysieren und zugleich auch das Vorkommen von Einbussen entweder bei wirtschaftlicher Leistung der regionaler Fairness zu untersuchen. Zu diesem Zwecke wird ein auf dem Ansatz von Brocker und Schneider (2002) aufbauendes raumliches komputables allgemeines Gleichgewichtsmodell entwickelt, um vergleichende statistische Analysen durchzufuhren, wobei verborgene `Eisberg`-Transportkosten ausdrucklich berucksichtigt werden. Es werden vier Unternehmenstatigk eiten aufgefuhrt: Herstellung, Nachfrage, Transportwesen und Exporte, und zwei Produktionsfaktoren vorausgesetzt: Arbeitskrafte und andere Faktoren. Das Modell umfasst zwolf Inlandsregionen und drei externe Regionen. Es werden vier gegensatzliche Experimente entwickelt, die auf einer Abnahme der Transportkosten infolge einer `Verkurzung der Entfernungen` beruhen. Die Hauptbefunde weisen darauf hin, dass die Forderung regionaler Fairness unbedeutend bleibt, wenn die Verbesserungen der Transportinfrastruktur sich nur auf minderbemittelte Regionen konzentrieren; werden die Verbesserungen der Verbindungen der Transportinfrastruktur in wohlhabenden Regionen durchgefuhrt, so nehmen regionale Einkommensunterschiede zu. Wenn die Verbesserungen jedoch auf Strassen abzielen, die wohlhabende Regionen mit weniger bemittelten verbinden, wird regionale Fairness starker gefordert. Das gleiche Ergebnis wird sich einstellen, wenn Verbesserungen an allen Strassenverbindungen des Staates vorgenommen werden. Raumliches, komputables, allgemeines Gleichgewichtsmodell Regionale Fairness Wirtschaftsleistung Transportkosten Almeida E. S. de, Haddad E. A. y Hewings G. J. D. Revisando el tema de la igualdad del transporte en las regiones, Regional Studies. El objetivo de este documento es analizar la relacion entre el transporte y la igualdad regional en Minas Gerais, Brasil. Asimismo investigamos la existencia de una compensacion entre el rendimiento economico y la igualdad regional. Para ello desarrollamos un modelo de equilibrio general computable y espacial basado en el enfoque de Brocker y Schneider en 2002 para hacer un analisis estatico y comparativo, explicitamente incorporando los costes ocultos de transporte. Se modelan cuatro actividades: la produccion, la demanda final, el transporte y las exportaciones. Suponemos que existen dos factores de produccion: mano de obra y otros factores. En este modelo, existen doce regiones internas y tres regiones externas. Desarrollamos cuatro experimentos contrafactuales basados en la disminucion de los costes de transporte debido a una `acortamiento de las distancias`. Los principales resultados indican que si la mejora de la infraestructura del transporte se centra solo entre las regiones mas pobres, el fomento de la igualdad regional es insignificante. Si los enlaces de la mejora de la infraestructura del transporte se concentran en las regiones ricas, aumentan las desigualdades de ingresos regionales. Sin embargo, si se mejoran los enlaces de carreteras entre las regiones pobres y ricas, se fomenta mejor la igualdad regional. El mismo resultado ocurre cuando se mejoran los enlaces de todas las carreteras del estado. Modelo de equilibrio general computable y espacial Igualdad regional Rendimiento economico Costes de transporte.

LATENT RANK CHANGE DETECTION FOR ANALYSIS OF SPLICE-JUNCTION MICROARRAYS WITH NONLINEAR EFFECTS

Alternative splicing of gene transcripts greatly expands the functional capacity of the genome, and certain splice isoforms may indicate specific disease states such as cancer. Splice junction microarrays interrogate thousands of splice junctions, but data analysis is difficult and error prone because of the increased complexity compared to differential gene expression analysis. We present Rank Change Detection (RCD) as a method to identify differential splicing events based upon a straightforward probabilistic model comparing the over-or underrepresentation of two or more competing isoforms. RCD has advantages over commonly used methods because it is robust to false positive errors due to nonlinear trends in microarray measurements. Further, RCD does not depend on prior knowledge of splice isoforms, yet it takes advantage of the inherent structure of mutually exclusive junctions, and it is conceptually generalizable to other types of splicing arrays or RNA-Seq. RCD specifically identifies the biologically important cases when a splice junction becomes more or less prevalent compared to other mutually exclusive junctions. The example data is from different cell lines of glioblastoma tumors assayed with Agilent microarrays.

Application of lumped dissipation model in nonlinear analysis of reinforced concrete structures

This paper deals with the application of the lumped dissipation model in the analysis of reinforced concrete structures, emphasizing the nonlinear behaviour of the materials The presented model is based on the original models developed by Cipollina and Florez-Lopez (1995) [12]. Florez-Lopez (1995) [13] and Picon and Florez-Lopez (2000) [14] However, some modifications were introduced in the functions that control the damage evolution in order to improve the results obtained. The efficiency of the new approach is evaluated by means of a comparison with experimental results on reinforced concrete structures such as simply supported beams, plane frames and beam-to-column connections Finally, the adequacy of the numerical model representing the global behaviour of framed structures is investigated and the limits of the analysis are discussed (C) 2009 Elsevier Ltd All rights reserved

GENERALIZED FINITE ELEMENT METHOD FOR NONLINEAR THREE-DIMENSIONAL ANALYSIS OF SOLIDS

The Generalized Finite Element Method (GFEM) is employed in this paper for the numerical analysis of three-dimensional solids tinder nonlinear behavior. A brief summary of the GFEM as well as a description of the formulation of the hexahedral element based oil the proposed enrichment strategy are initially presented. Next, in order to introduce the nonlinear analysis of solids, two constitutive models are briefly reviewed: Lemaitre`s model, in which damage and plasticity are coupled, and Mazars`s damage model suitable for concrete tinder increased loading. Both models are employed in the framework of a nonlocal approach to ensure solution objectivity. In the numerical analyses carried out, a selective enrichment of approximation at regions of concern in the domain (mainly those with high strain and damage gradients) is exploited. Such a possibility makes the three-dimensional analysis less expensive and practicable since re-meshing resources, characteristic of h-adaptivity, can be minimized. Moreover, a combination of three-dimensional analysis and the selective enrichment presents a valuable good tool for a better description of both damage and plastic strain scatterings.

An EFG method for the nonlinear analysis of plates undergoing arbitrarily large deformations

The applicability of a meshfree approximation method, namely the EFG method, on fully geometrically exact analysis of plates is investigated. Based on a unified nonlinear theory of plates, which allows for arbitrarily large rotations and displacements, a Galerkin approximation via MLS functions is settled. A hybrid method of analysis is proposed, where the solution is obtained by the independent approximation of the generalized internal displacement fields and the generalized boundary tractions. A consistent linearization procedure is performed, resulting in a semi-definite generalized tangent stiffness matrix which, for hyperelastic materials and conservative loadings, is always symmetric (even for configurations far from the generalized equilibrium trajectory). Besides the total Lagrangian formulation, an updated version is also presented, which enables the treatment of rotations beyond the parameterization limit. An extension of the arc-length method that includes the generalized domain displacement fields, the generalized boundary tractions and the load parameter in the constraint equation of the hyper-ellipsis is proposed to solve the resulting nonlinear problem. Extending the hybrid-displacement formulation, a multi-region decomposition is proposed to handle complex geometries. A criterium for the classification of the equilibrium`s stability, based on the Bordered-Hessian matrix analysis, is suggested. Several numerical examples are presented, illustrating the effectiveness of the method. Differently from the standard finite element methods (FEM), the resulting solutions are (arbitrary) smooth generalized displacement and stress fields. (c) 2007 Elsevier Ltd. All rights reserved.

Bayesian Analysis for Nonlinear Regression Model Under Skewed Errors, with Application in Growth Curves

We have considered a Bayesian approach for the nonlinear regression model by replacing the normal distribution on the error term by some skewed distributions, which account for both skewness and heavy tails or skewness alone. The type of data considered in this paper concerns repeated measurements taken in time on a set of individuals. Such multiple observations on the same individual generally produce serially correlated outcomes. Thus, additionally, our model does allow for a correlation between observations made from the same individual. We have illustrated the procedure using a data set to study the growth curves of a clinic measurement of a group of pregnant women from an obstetrics clinic in Santiago, Chile. Parameter estimation and prediction were carried out using appropriate posterior simulation schemes based in Markov Chain Monte Carlo methods. Besides the deviance information criterion (DIC) and the conditional predictive ordinate (CPO), we suggest the use of proper scoring rules based on the posterior predictive distribution for comparing models. For our data set, all these criteria chose the skew-t model as the best model for the errors. These DIC and CPO criteria are also validated, for the model proposed here, through a simulation study. As a conclusion of this study, the DIC criterion is not trustful for this kind of complex model.

Two dimensional analysis of inflatable structures by the positional FEM

This paper presents a, simple two dimensional frame formulation to deal with structures undergoing large motions due to dynamic actions including very thin inflatable structures, balloons. The proposed methodology is based on the minimum potential energy theorem written regarding nodal positions. Velocity, acceleration and strain are achieved directly from positions, not. displacements, characterizing the novelty of the proposed technique. A non-dimensional space is created and the deformation function (change of configuration) is written following two independent mappings from which the strain energy function is written. The classical New-mark equations are used to integrate time. Dumping and non-conservative forces are introduced into the mechanical system by a rheonomic energy function. The final formulation has the advantage of being simple and easy to teach, when compared to classical Counterparts. The behavior of a bench-mark problem (spin-up maneuver) is solved to prove the formulation regarding high circumferential speed applications. Other examples are dedicated to inflatable and very thin structures, in order to test the formulation for further analysis of three dimensional balloons.

A frequency approach to identifying asteroid families II. Families interacting with nonlinear secular resonances and low-order mean-motion resonances

Aims. In an earlier paper we introduced a new method for determining asteroid families where families were identified in the proper frequency domain (n, g, g + s) ( where n is the mean-motion, and g and s are the secular frequencies of the longitude of pericenter and nodes, respectively), rather than in the proper element domain (a, e, sin(i)) (semi-major axis, eccentricity, and inclination). Here we improve our techniques for reliably identifying members of families that interact with nonlinear secular resonances of argument other than g or g + s and for asteroids near or in mean-motion resonant configurations. Methods. We introduce several new distance metrics in the frequency space optimal for determining the diffusion in secular resonances of argument 2g - s, 3g - s, g - s, s, and 2s. We also regularize the dependence of the g frequency as a function of the n frequency (Vesta family) or of the eccentricity e (Hansa family). Results. Our new approaches allow us to recognize as family members objects that were lost with previous methods, while keeping the advantages of the Carruba & Michtchenko (2007, A& A, 475, 1145) approach. More important, an analysis in the frequency domain permits a deeper understanding of the dynamical evolution of asteroid families not always obtainable with an analysis in the proper element domain.

PARTITIONED ANALYSIS FOR DIMENSIONALLY-HETEROGENEOUS HYDRAULIC NETWORKS

In this work an iterative strategy is developed to tackle the problem of coupling dimensionally-heterogeneous models in the context of fluid mechanics. The procedure proposed here makes use of a reinterpretation of the original problem as a nonlinear interface problem for which classical nonlinear solvers can be applied. Strong coupling of the partitions is achieved while dealing with different codes for each partition, each code in black-box mode. The main application for which this procedure is envisaged arises when modeling hydraulic networks in which complex and simple subsystems are treated using detailed and simplified models, correspondingly. The potentialities and the performance of the strategy are assessed through several examples involving transient flows and complex network configurations.

PARTIAL STABILITY FOR A CLASS OF NONLINEAR SYSTEMS

This paper studies a nonlinear, discrete-time matrix system arising in the stability analysis of Kalman filters. These systems present an internal coupling between the state components that gives rise to complex dynamic behavior. The problem of partial stability, which requires that a specific component of the state of the system converge exponentially, is studied and solved. The convergent state component is strongly linked with the behavior of Kalman filters, since it can be used to provide bounds for the error covariance matrix under uncertainties in the noise measurements. We exploit the special features of the system-mainly the connections with linear systems-to obtain an algebraic test for partial stability. Finally, motivated by applications in which polynomial divergence of the estimates is acceptable, we study and solve a partial semistability problem.