Redescription of Anopheles (Nyssorhynchus) lutzii, and Resurrection of Anopheles guarani From Synonymy With An. lutzii (Diptera: Culicidae)

Anopheles lutzii Cruz (Diptera: Culicidae) is redescribed using specimens collected in Pariquera-Acu, Vale do Ribeira, state of Sao Paulo, southeastern Mata Atlantica, Brazil. Specimens of An. lutzii from Vale do Ribeira and two females from Nova Friburgo, Rio de Janeiro, are compared with three syntypes of An. lutzii, deposited in the Instituto Oswaldo Cruz, Rio de Janeiro. Comparisons of external morphology of specimens from the type locality of Anopheles guarani Shannon demonstrate it is a valid species, and that Anopheles niger Theobald is conspecific with Anopheles guarani stat. rev. The adult male, male terminalia, fourth-instar larva, and pupa of An. guarani stat. rev. are described for the first time. Diagnostic characters of the male and female, male terminalia, fourth-instar larva and pupa of An. lutzii and An. guarani stat. rev. are illustrated. An. guarani stat. rev. is herein resurrected from the synonymy with An. lutzii, and Anopheles niger comb. nov. is transferred from the synonymy with An. lutzii to the synonymy of An. guarani stat. rev.

The occurrence of Laurencia marilzae (Ceramiales, Rhodophyta) in Brazil based on morphological and molecular data

Laurencia marilzae is recorded for the first time from the western Atlantic Ocean; it was found in Laje de Santos Marine State Park, Sao Paulo, southeastern Brazil. The specimens were collected in the rocky subtidal zone from 7 to 15 m depth. The most distinctive characteristic of this species is the presence of corps en cerise in all cells of the thallus, including cortex, medulla, and trichoblasts. The phylogenetic position of the species was inferred by analysis of the chloroplast-encoded rbcL gene sequences from 43 taxa, using two other rhodomelacean taxa and two members of the Ceramiaceae as outgroups. Within the Laurencia assemblage, L. marilzae from Brazil and from the Canary Islands ( type locality) formed a distinctive lineage sister to all other Laurencia species analyzed. Male plants are described for the first time. This study expands the geographical distribution of L. marilzae to the western Atlantic Ocean.

Evidence for the conspecificity of Palisada papillosa with P. perforata (Ceramiales, Rhodophyta) from the western and eastern Atlantic Ocean on the basis of morphological and molecular analyses

Morphological and molecular studies were carried out on Palisada papillosa and P. perforata from the Canary Islands (type locality of P. perforata), Mexico and Brazil. The two species have been distinguished by features of their external morphology such as size and degree of compactness of the thalli, presence or absence of arcuate branches, branching pattern and basal system. A detailed morphological comparison between these taxa showed that none of the vegetative anatomical or reproductive characters was sufficient to separate these species. The presence or absence of cortical cells in a palisade-like arrangement, also previously used to. distinguish these species, is not applicable. The species present all characters typical of the genus, and both share production of the first pericentral cell underneath the basal cell of the trichoblast, production of two fertile pericentral cells (the second and the third additional, the first remaining sterile), spermatangial branches produced from one of two laterals on the suprabasal cell of trichoblasts, and the procarpbearing segment with four pericentral cells. Details of the procarp are described for the species for the first time. The phylogenetic position of these species was inferred by analysis of the chloroplast-encoded rbcL gene sequences from 39 taxa, using one other Rhodomelacean taxon and two Ceramiaceae as outgroups. Relationships within the clade formed by P. papillosa and P. perforata have not been resolved due to the low level of genetic variation in their rbcL sequences (0-0.4%). Considering this and the morphological similarities, we conclude that P. papillosa is a taxonomic synonym of P. perforata. The phylogenetic analyses also supported the nomenclatural transfer of two species of Chondrophycus to Palisada, namely, P. patentiramea (Montagne) Cassano, Senties, Gil-Rodriguez & M.T. Fujii comb. nov. and P. thuyoides (Kutzing) Cassano, Senties, Gil-Rodriguez & M.T. Fujii comb. nov.

An old taxonomic dilemma: the identity of the western south Atlantic lebranche mullet (Teleostei: Perciformes: Mugilidae)

The identification of the lebranche mullet in the western south Atlantic has long been problematical. In most recent works either Mugil liza Valenciennes and M. platanus Gunther, 1880 or M. liza and M. cephalus Linnaeus, 1758 were recognized from the region and more rarely the occurrence of only one species has been proposed but without sufficient morphological, biochemical or molecular data to allow the designation of the taxonomically appropriate name. Analysis of meristic and morphometric data taken from samples collected from Venezuela to Argentina, clearly indicates that there is only one species of lebranche mullet in the Caribbean Sea region and the Atlantic coast of South America and that Mugil liza is the appropriate name. The comparison of the combined data from all the samples of M. liza with the data taken from one sample of M. cephalus that originated in the Mediterranean, the possible locality from which type specimens were collected (Eschmeyer and Fricke, 2009), revealed significant differences indicating that they are different species. It is also suggested that individuals from the western north Atlantic identified as M. cephalus might represent a population of M. liza in this region.

Psammophilous halacarid mites (Trombidiformes, Halacaridae) from the North Coast of Sao Paulo State, Brazil

Five halacarid species are reported from the Brazilian coast for the first time. Scaptognathides delicatulus, formerly known only from its type locality in Kuwait; Scaptognathus gibbosus, known from Galapagos and Somalia; and Scaptognathus insularis known from northeastern Australia, have their distributions extended. Along with these new records, Halacaroides antoniazziae sp. nov. and Acarochelopodia caissara sp. nov. are described. Halacaroides antoniazziae sp. nov. differs from its congeners by the presence of three subgenital setae in males and none in females, 41-44 perigenital setae and two posterior external genital acetabula in males. Acarochelopodia caissara sp. nov. has a rounded anterior epimeral plate margin, the posterior epimeral plates are partially divided into two halves but anteriorly joined by a narrow band, the dorsal setae on tarsus I are grouped 1:2, and the anterior and posterior dorsal plates have a length: width ratio of 1.61-1.77 and 1.60-1.70, respectively.

A new microteiid lizard of the genus Acratosaura (Squamata: Gymnophthalmidae) from Serra do Sincora, State of Bahia, Brazil

A new species of the genus Acratosaura is described on the basis of two specimens obtained at the ""campos rupestres"" (rocky meadows) near Mucuge municipality, state of Bahia, Brazil. Acratosaura spinosa sp. nov., has ear openings and eyelids, pentadactyl limbs lacking a claw on first toe, a single frontonasal, prefrontals, frontoparietals, parietals, interparietals, occipitals, no collar fold, three pairs of genials, three supraoculars and three superciliaries and is further characterized by presenting 28-31 rows of strongly keeled, lanceolate and imbricate dorsal scales, sides of the neck with keeled scales, striate temporal scales, four longitudinal and 17-18 transverse rows of smooth ventral scales, 28-30 scales around the body, 14 and 19-20 infradigital lamellae under finger IV and toe IV, respectively, 13 total preanal and femoral pores in male, absent in female. The new species differs strikingly in color pattern from its only congener A. mentalis. The two species occur sympatricaly in the high altitude open habitats near the type locality.

Castoraeschna corbeti sp nov from Floresta Nacional de Carajas, Para state, Brazil (Odonata: Aeshnidae)

Castoraeschna corbeti sp. nov. is described and diagnosed based on four males (holotype: Brazil, Para State, Floresta Nacional cle Carajas [6 degrees 06`13.9 `` S, 50 degrees 08`13.1 `` W, ca 600 m a.s.l.], 28 ix 2007 to be deposited in Museu Nacional, Universidade Federal do Rio de Janeiro, Rio de Janeiro). This species is similar to C. longfieldae and C. coronata but can be distinguished mainly by the absence of medio-dorsal spots on S8; postero-dorsal spots on S8-9 very narrow; cerci external margin almost straight in lateral view, without a distinct angulation between stern and base of lamina; cerci apex blunt. The probable ultimate stadium larva is described based on two individuals, male and female, collected at the type locality. Adults were observed flying along margins of a small shaded second-order stream where the larvae were taken. The surrounding forest is under impact of iron ore extraction and will probably disappear in the next years.

Phylogenetic position of Dendropsophus gaucheri (Lescure and Marty 2000) highlights the need for an in-depth investigation of the phylogenetic relationships of Dendropsophus (Anura: Hylidae)

Dendropsophus gaucheri is a recently described species which inhabits open areas of the eastern part of the Guiana Shield and is currently assigned to the D. parviceps species group based on the presence of a subocular cream spot. Herein we investigate its phylogenetic position including material from the type locality and newly documented populations from Suriname and Brazil based on mtDNA sequences. The species, as well as D. riveroi which is assigned to the D. minimus species group, were recovered nested within the D. microcephalus species group which implies the paraphyly of the three Dendropsophus species groups. Such result, along with other evidences, highlights the need for a thorough revision of the genus. The genetic distances among D. gaucheri samples studied are low confirming their conspecificity and suggesting recent connections among populations from open areas currently isolated by rainforest in the lowlands of the Guiana Shield.

The spider genus Chrysometa (Araneae, Tetragnathidae) from the Pico da Neblina and Serra do Tapirapeco mountains (Amazonas, Brazil): new species, new records, diversity and distribution along two altitudinal gradients

Eight new species of the spider genus Chrysometa Simon, 1894 (Araneae, Tetragnathidae) are described and illustrated. Chrysometa nubigena n. sp., C. waikoxi n. sp., C. petrasierwaldae n. sp., C. santosi n. sp., C. yanomami n. sp., C. candianii n. sp., C. lomanhungae n. sp., and C. saci n. sp. Those species were collected in a study on the diversity of spider communities along altitudinal gradients in Brazilian Amazonia. C. saci was captured at the Serra do Tapirapeco (Barcelos), while all the other species are from the Pico da Neblina (Sao Gabriel da Cachoeira), the highest mountain in Brazil. We provide new records for C. boraceia, C. flava, C. guttata, C. minuta and C. opulenta, and we describe the male of C. minuta for the first time. We also present the first results on the diversity and altitudinal distribution of the species of Chrysometa at the Pico da Neblina and Serra do Tapirapeco. We sampled the first locality at six different elevations, and obtained 336 specimens distributed in 12 species. Richness and abundance, as well as relative importance peaked at the highest sites sampled (2,000 and 2,400 m). The three most abundant species showed a segregated distribution, being dominant or exclusively distributed in different altitudes. At the Serra do Tapirapeco, sampling at four different elevations up to 1200 m, we only obtained 40 individuals divided in four species, and there was no clear relation to altitude. Most of the new species were found at mid and high altitude sites, while species from lower altitude sites represented widespread species. The comparison with other neotropical spiders inventories highlights the high diversity recorded at Pico da Neblina, which could be assigned to the large environmental variation covered in this work and to the sampling of high-altitude environments. Inventories in the Andean region and other information in the literature also seem to support the association of Chrysometa with high altitude environments.

Phylogeography and evolutionary history of dengue virus type 3

In this study, we revisited the phylogeography of the three of major DENV-3 genotypes and estimated its rate of evolution, based on the analysis of the envelope (E) gene of 200 strains isolated from 31 different countries around the world over a time period of 50 years (1956-2006). Our phylogenetic analysis revealed a geographical subdivision of DENV-3 population in several country-specific clades. Migration patterns of the main DENV-3 genotypes showed that genotype I was mainly circumspect to the maritime portion of Southeast-Asia and South Pacific, genotype 11 stayed within continental areas in South-East Asia, while genotype III spread across Asia, East Africa and into the Americas. No evidence for rampant co-circulation of distinct genotypes in a single locality was found, suggesting that some factors, other than geographic proximity, may limit the continual dispersion and reintroduction of new DENV-3 variants. Estimates of the evolutionary rate revealed no significant differences among major DENV-3 genotypes. The mean evolutionary rate of DENV-3 in areas with long-term endemic transmissions (i.e., Indonesia and Thailand) was similar to that observed in the Americas, which have been experiencing a more recent dengue spread. We estimated the origin of DENV-3 virus around 1890, and the emergence of current diversity of main DENV-3 genotypes between the middle 1960s and the middle 1970s, coinciding with human population growth, urbanization, and massive human movement, and with the description of the first cases of DENV-3 hemorrhagic fever in Asia. (C) 2008 Elsevier B.V. All rights reserved.

Twofold adaptive partition of unity implicits

Partition of Unity Implicits (PUI) has been recently introduced for surface reconstruction from point clouds. In this work, we propose a PUI method that employs a set of well-observed solutions in order to produce geometrically pleasant results without requiring time consuming or mathematically overloaded computations. One feature of our technique is the use of multivariate orthogonal polynomials in the least-squares approximation, which allows the recursive refinement of the local fittings in terms of the degree of the polynomial. However, since the use of high-order approximations based only on the number of available points is not reliable, we introduce the concept of coverage domain. In addition, the method relies on the use of an algebraically defined triangulation to handle two important tasks in PUI: the spatial decomposition and an adaptive polygonization. As the spatial subdivision is based on tetrahedra, the generated mesh may present poorly-shaped triangles that are improved in this work by means a specific vertex displacement technique. Furthermore, we also address sharp features and raw data treatment. A further contribution is based on the PUI locality property that leads to an intuitive scheme for improving or repairing the surface by means of editing local functions.

On the effects of geographical constraints on task execution in complex

In the present work, the effects of spatial constraints on the efficiency of task execution in systems underlain by geographical complex networks are investigated, where the probability of connection decreases with the distance between the nodes. The investigation considers several configurations of the parameters defining the network connectivity, and the Barabasi-Albert network model is also considered for comparisons. The results show that the effect of connectivity is significant only for shorter tasks, the locality of connection simplied by the spatial constraints reduces efficiency, and the addition of edges can improve the efficiency of the execution, although with increasing locality of the connections the improvement is small.

Rock magnetism in soils of the Pampean plain. Buenos Aires province, Argentina. Linking climate and magnetic behaviour

Results of the study of Argiudolls in two localities (Zarate and Veronica) of the Pampean plain, Argentina, are presented in this contribution. This is a typical area covered by loess. The magnetic studies carried out allowed to determine the presence of detrital magnetite and titanomagnetite, as well as maghemite, pedogenic goethite and superparamagnetic particles (SP). In Veronica soils, a depletion of ferromagnetic minerals is recorded The dominant process in these soils has been the reductive loss of detrital magnetite and titanomagnetite. This is associated with a greater degree of evolution of the soil, which is determined by the concentration and type of detected clays. The higher clay concentration in these soils facilitated reducing conditions and a greater loss of detrital magnetic particles. The loss is reinforced under poor drainage conditions. In the poorly drained soil of Zarate, a concentration of magnetic particles is observed in the Bt horizon, which is associated with an illuviation process. The well drained soil of the same locality shows neoformation of SP particles. These particles would have an ephemeral life until a new wet period in the annual cycle occurs. Although some characteristics of the magnetic signal appear reinforced by the conditions of drainage, this aspect does not seem to be too significant, at least in the Pampean region with low topographic gradients.

Bendadaite, a new iron arsenate mineral of the arthurite group

Bendadaite, ideally Fe(2+)Fe(2)(3+)(AsO(4))(2)(OH)(2 center dot).4H(2)O, is a new member of the arthurite group It was found as a weathering product of arsenopyrite on a single hand specimen from the phosphate pegmatite Bendada. central Portugal (type locality) Co-type locality is the granite pegmatite of La via do Almerindo (Almerindo mine), Linopolis, Divmo das Laranjeiras county, Minas Gerais, Brazil Further localities are the Vein Negra mine, Copiapo province, Chile, mid-East, Bou Azzer district, Morocco, and Para Inferida yard, Fenugu Sibirt mine, Gonnosfanadiga, Medio Campidano Province, Sardinia. Italy Type bendadaite occurs as blackish green to dark brownish tufts (<0 1 mm long) and flattened radiating aggregates. in intimate association with an intermediate member of the scorodite-mansfieldite series It is monoclinic. space group P2(l/c). with a = 10 239(3) angstrom. b = 9 713(2) angstrom, c = 5 552(2) angstrom. beta = 94 11(2)degrees. = 550 7(2) angstrom(3). Z = 2 Electron-microprobe analysis yielded (wt %). CaO 0 04, MnO 0 03. CuO 006, ZnO 004. Fe(2)O(3) (total) 43 92, Al(2)O(3) 115. SnO(2) 0 10, As(2)O(5) 43 27. P(2)O(5) 1 86, SO(3) 0.03 The empirical formula is (Fe(0 52)(2+)Fe(0 32)(3+)rectangle(0 16))(Sigma 1 00)(Fe(1 89)(3+)Al(0 11))(Sigma 2 00)(As(1 87)P(0 13))(Sigma 2 00)O(8)(OH)(2 00) 4H(2)O based. CM 2(As,P) and assuming ideal 80, 2(OH), 4H2O and complete occupancy of the ferric on site by Fe(3+) and Al Optically, bendadaite is biaxial, positive, 2V(est) = 85+/-4 degrees, 2V(eale) = 88 degrees, with alpha 1 734(3). 13 1 759(3), 7 1 787(4) Pleochrosim is medium strong X pale reddish brown. Y yellowish brown, Z dark yellowish brown. absorption Z > V > X, optical dispersion weak, r > v. Optical axis plane Is parallel to (010), with X approximately parallel to a and Z nearly parallel to c Bendadaite has vitreous to sub-adamantine luster, is translucent and non-fluorescent It is brittle, shows irregular fracture and a good cleavage parallel to 1010} 3 15 0 10 g/cm(3), 3 193 g/cm3 (for the empirical formula) The five strongest powder diffraction lines [d in angstrom (I)(hkl] are 10 22 (10)(100), 7 036 (8)(110), 4 250 (5)(11 I), 2 865 (4)(311), 4 833 (3)(020,011) The d spacings are very similar to those of its Zn analogue, ojelaite The crystal structure of bendadaite was solved and refined using a crystal from the co-type locality with the composition (Fe(0 95)(2+)rectangle(0 05))(Sigma 1 00)(Fe(1 80)(3+)Al(0 20))Sigma(2 00)(As(1 48)P(0 52))(Sigma 2 00)O(8)) (OH)(2) 4H(2)O (R = 16%) and confirms an arthurite-type atomic arrangement

Brumadoite, a new copper tellurate hydrate, from Brumado, Bahia, Brazil

Brumadoite, ideally Cu(2)Te(6+)O(4)(OH)(4)center dot 5H(2)O, is a new mineral from Pedra Preta mine, Serra das Eguas, Brumado, Bahia, Brazil. It occurs as microcrystalline aggregates both on and, rarely, pseudomorphous after coarse-grained magnesite, associated with mottramite and quartz. Crystals are platy, subhedral, 1-2 mu m in size. Brumadoite is blue (near RHS 114B), has a pale blue streak and a vitreous lustre. It is transparent to translucent and does not fluoresce. The empirical formula is (Cu(2.90)Pb(0.04)Ca(0.01))(Sigma 2.95) (Te(0.93)(6+)Si(0.05))(Sigma 0.98)O(3.92)(OH)(3.84)center dot 5.24H(2)O. Infrared spectra clearly show both (OH) and H(2)O. Microchemical spot tests using a KI Solution show that brumadoite has tellurium in the 6(+) state. The mineral is monoclinic, P2(1)/m or P2(1). Unit-cell parameters refined from X-ray powder data are a 8.629(2) angstrom, b 5.805(2) angstrom, c 7.654(2) angstrom, beta 103.17(2)degrees, V 373.3(2) angstrom(3), Z = 2. The eight strongest X-ray powder-diffraction lines [d in angstrom, (l),(hkl)] are: 8.432,(100),(100); 3.162,(66),((2) over bar 02); 2.385,(27),(220); 2.291,((1) over bar 12),(22); 1.916,(11),(312); 1.666,(14),((4) over bar 22,114); 1.452,(10), (323, 040); 1.450,(10),(422,403). The name is for the type locality, Brumado, Bahia, Brazil. The new mineral species has been approved by the CNMNC (IMA 2008-028).