10 resultados para Literatura marginal
em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo (BDPI/USP)
Resumo:
Dentin adhesion procedure presents limitations, especially regarding to lifetime stability of formed hybrid layer. Alternative procedures have been studied in order to improve adhesion to dentin. OBJECTIVE: The aim of this study was to evaluate in vitro the influence of deproteinization or dentin tubular occlusion, as well as the combination of both techniques, on microtensile bond strength (µTBS) and marginal microleakage of composite resin restorations. MATERIAL AND METHODS: Extracted erupted human third molars were randomly divided into 4 groups. Dentin surfaces were treated with one of the following procedures: (A) 35% phosphoric acid gel (PA) + adhesive system (AS); (B) PA + 10% NaOCl + AS; (C) PA + oxalate + AS and (D) PA + oxalate + 10% NaOCl + AS. Bond strength data were analyzed statistically by two-way ANOVA and Tukey's test. The microleakage scores were analyzed using Kruskal-Wallis and Mann-Whitney non-parametric tests. Significance level was set at 0.05 for all analyses. RESULTS: µTBS data presented statistically lower values for groups D and B, ranking data as A>C>B>D. The use of oxalic acid resulted in microleakage reduction along the tooth/restoration interface, being significant when used alone. On the other hand, the use of 10% NaOCl alone or in combination with oxalic acid, resulted in increased microleakage. CONCLUSIONS: Dentin deproteinization with 10% NaOCl or in combination with oxalate significantly compromised both the adhesive bond strength and the microleakage at interface. Tubular occlusion prior to adhesive system application seems to be a useful technique to reduce marginal microleakage.
Resumo:
Leiomioma de cavidade nasal e seios paranasais é raro. Ele constitui menos de 1% de todos os leiomiomas do corpo humano. Isto se deve à escassez de células musculares no nariz. Estas neoplasias podem ser classificadas em três grupos: leiomioma, angiomioma e leiomioma epitelióide. Somente 15 casos de angiomioma foram encontrados na literatura. O tratamento de escolha é a excisão cirúrgica. Um novo caso e a revisão da literatura são apresentados.
Resumo:
The aim of the present study was to evaluate the influence of different photopolymerization (halogen, halogen soft-start and LED) systems on shear bond strength (SBS) and marginal microleakage of composite resin restorations. Forty Class V cavities (enamel and dentin margins) were prepared for microleakage assessment, and 160 enamel and dentin fragments were prepared for the SBS test, and divided into 4 groups. Kruskal-Wallis and Wilcoxon tests showed statistically significant difference in microleakage between the margins (p < 0.01) with incisal margins presenting the lowest values. Among the groups, it was observed that, only at the cervical margin, halogen soft-start photo polymerization presented statistically significant higher microleakage values. For SBS test, ANOVA showed no statistical difference (p > 0.05) neither between substrates nor among groups. It was concluded that Soft-Start technique with high intensity end-light influenced negatively the cervical marginal sealing, but the light-curing systems did not influence adhesion.
Resumo:
Em meio às diversas transformações sofridas pelo casamento e pela família ao longo da história, várias configurações familiares convivem na contemporaneidade: nuclear, monoparental, homoparental, recomposta, entre outras possibilidades. Nesse contexto, aumenta, em vários países, e mais recentemente no Brasil, o número de casais que escolhem não ter filhos. O objetivo deste trabalho foi realizar uma revisão bibliográfica sobre o tema, incluindo publicações nacionais e internacionais. A busca foi feita em bases de dados (Web of Science, PsycINFO, Medline, SciELO, Lilacs, Psicodoc, BVS-Psi, Dedalus), e foram levantados artigos completos em periódicos indexados e resumos de teses e dissertações produzidas nos últimos dez anos. Os resultados coletados abordam diversas facetas do fenômeno da escolha contemporânea por não ter filhos: motivações declaradas, associação entre esse tipo de escolha e a situação profissional, relação com fatores de história de vida e família de origem, satisfação de vida e conjugal, preconceito e estereótipos negativos.
Resumo:
O presente estudo teve como objetivo descrever as principais características dos estudos epidemiológicos que investigaram a associação entre condições socioeconômicas e câncer de cabeça e pescoço. Foram pesquisadas as bases de dados Medline (Literatura Internacional em Ciências), Lilacs (Literatura Latino-Americana e do Caribe em Ciências da Saúde) e Scielo (Scientific Electronic Library Online), além de referências citadas nos artigos obtidos a partir da busca primária nessas bases. O período de publicação considerado englobou 38 anos (1970-2007) e a análise restringiu-se aos artigos em espanhol, inglês ou português. Foram selecionados 25 estudos, 15 com delineamento caso-controle, quatro ecológicos e seis que mesclaram informações de bases de dados oficiais, como censos e registros de câncer ou de óbitos. A maior parte das pesquisas reportou associação entre piores condições socioeconômicas e câncer de cabeça e pescoço. Os indicadores mais empregados foram a ocupação e a escolaridade. Poucos estudos investigaram mediação, procurando evidenciar quais os fatores proximais operam na associação investigada. Pesquisas adicionais, com critérios uniformes para proceder aos ajustes nos modelos de regressão e amostra suficiente, são necessárias para investigar essa dimensão.
Resumo:
O objetivo deste trabalho é apresentar uma revisão de literatura sobre a capacidade para o trabalho de trabalho e envelhecimento funcional. Foi realizada uma extensa busca de publicações do período de 1966 a 2006, usando as bases de dados MEDLINE, Lilacs e SciELO. São apresentados vários aspectos relativos à capacidade para o trabalho: o contexto histórico no qual o tema emergiu, o referencial teórico, os fatores determinantes, um modelo explicativo, a metodologia atual para avaliar e monitorar a capacidade para o trabalho e a importância de sua promoção. Também é destacada a situação atual da pesquisa, prática e perspectivas futuras relativas ao tema. No contexto do envelhecimento da força de trabalho, a capacidade para o trabalho tornou-se um indicador importante em função de suas consequências para a saúde, bem-estar e empregabilidade dos trabalhadores, com impactos para os indivíduos, organizações e sociedade. As questões sobre o tema, apesar de relevantes, ainda carecem de maior atenção.
Resumo:
A responsabilidade social empresarial tem se tornado tema debatido e propagado pela mídia global e brasileira e adquirido importância nas estratégias de negócios de uma empresa. a sociedade não aceita mais que empresas forneçam apenas qualidade, preço e cumprimento da legislação; ela passou a valorizar, cada vez mais, empresas que ajudam a minimizar os problemas sociais e ambientais da atualidade. mas qual o significado de responsabilidade social? neste artigo realiza-se uma revisão de literatura sobre o conceito e seu desenvolvimento na atualidade
Resumo:
Rotifera density, biomass, and secondary production on two marginal lakes of Paranapanema River were compared after the recovery of hydrologic connectivity with the river (Sao Paulo State, Brazil). Daily samplings were performed in limnetic zone of both lakes during the rainy season immediately after lateral inflow of water and, in the dry period, six months after hydrologic connectivity recovery. In order to identify the factors that affect rotifer population dynamics, lake water level, volume, depth, temperature, transparency, dissolved oxygen, pH, alkalinity, conductivity, suspended solids, nutrients, and chlorophyll-a were determined. Variations of water physical and chemical factors that affect rotifer population were related to the lake-river degree of connection and to water level rising after drought. The water lateral inflow from the river resulted in an increase in lake water volume, depth, and transparency and a decrease in water pH, alkalinity, and suspended solids. The lake with the wider river connection, more frequent biota exchange, and larger amount of particulate and dissolved materials was richer and more diverse, while rotifer density, biomass, and productivity were lower in both periods studied. Density, biomass, and secondary production were higher in the lake with the smaller river connection and the higher physical and chemical stability. Our results show that the connectivity affects the limnological stability, associated to seasonality. Stable conditions, caused by low connectivity in dry periods, were related with high density, biomass and secondary production. Conversely, instability conditions in rainy periods were associated to elevated richness and diversity values, caused by exchange biota due to higher connectivity. (C) 2008 Elsevier GmbH. All rights reserved.
Resumo:
We extended the standard neoclassical model of investment for the case of an open economy. Our model shows that risk premium not only creates a wedge between the marginal product of capital across countries but also reduces an economy`s savings rate. A riskier market thus presents a lower income per capita, ceteris paribus. Our empirical analysis, from 1950 to 2003, lends support to the conclusion that both risk and the correction for output price to investment ratio help to explain the differentials.
Resumo:
Objectives. This study evaluated the effect of composite pre-polymerization temperature and energy density on the marginal adaptation (MA), degree of conversion (DC), flexural strength (FS), and polymer cross-linking (PCL) of a resin composite (Filtek Z350, 3M/ESPE). Methods. For MA, class V cavities (4mmx2mmx2mm) were prepared in 40 bovine incisors. The adhesive system Adper Single Bond 2 (3M/ESPE) was applied. Before being placed in the cavities, the resin composite was either kept at room-temperature (25 degrees C) or previously pre-heated to 68 degrees C in the Calset (TM) device (AdDent Inc., Danbury, CT, USA). The composite was then light polymerized for 20 or 40s at 600mW/cm(2) (12 or 24 J/cm(2), respectively). The percentage of gaps was analyzed by scanning electron microscopy, after sectioning the restorations and preparing epoxy resin replicas. DC (n = 3) was obtained by FT-Raman spectroscopy on irradiated and non-irradiated composite surfaces. FS (n = 10) was measured by the three-point-bending test. KHN (n = 6) was measured after 24h dry storage and again after immersion in 100% ethanol solution for 24 h, to calculate PCL density. Data were analyzed by appropriate statistical analyses. Results. The pre-heated composite showed better MA than the room-temperature groups. A higher number of gaps were observed in the room-temperature groups, irrespective of the energy density, mainly in the axial wall (p < 0.05). Composite pre-heating and energy density did not affect the DC, FS and PCL (p > 0.05). Significance. Pre-heating the composite prior to light polymerization similar in a clinical situation did not alter the mechanical properties and monomer conversion of the composite, but provided enhanced composite adaptation to cavity walls. (C) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.