23 resultados para Distrito industrial
em Biblioteca Digital da Produção Intelectual da Universidade de São Paulo (BDPI/USP)
Resumo:
Os motivos para as diferenças epidemiológicas e para a adesão ao tratamento da tuberculose em relação a homens e mulheres são desconhecidos. Este trabalho tem como objetivo verificar diferenças na adesão ao tratamento da tuberculose em relação ao sexo; identificar aspectos facilitadores e dificultadores para a adesão ao tratamento da tuberculose em relação ao sexo; analisar as crenças consideradas importantes para a adesão ao tratamento da tuberculose. Foi utilizado o referencial teórico do Modelo de Crenças em Saúde de Rosenstock e a técnica da Análise de Conteúdos de Bardin. Foram realizadas 28 entrevistas semiestruturadas com homens e mulheres em tratamento supervisionado de tuberculose do Distrito de Saúde da Freguesia do Ó/Brasilândia. Os resultados mostraram que o perfil daqueles que falharam na terapêutica da tuberculose em relação ao sexo foi: mulher - solteira e separada, com atividade remunerada não comprovada, nível de escolaridade entre fundamental I completo e ensino médio completo; homem - casado, com atividade remunerada comprovada, nível de escolaridade entre ensino fundamental II completo e ensino médio completo. Os aspectos facilitadores encontrados para a boa adesão residem no bom atendimento dos profissionais de saúde e na percepção, por parte do paciente, da sua melhora de saúde. As crenças para a boa adesão ao tratamento no sexo masculino e feminino foram: bom atendimento do serviço de saúde e bom tratamento (em relação aos medicamentos).
Resumo:
OBJETIVO: Descrever métodos e resultados iniciais do Sistema de Vigilância de Fatores de Risco e Proteção para Doenças Crônicas não Transmissíveis por Inquérito Telefônico - VIGITEL implantado no Brasil em 2006. MÉTODOS: O VIGITEL estudou amostras probabilísticas da população com 18 ou mais anos de idade residente em domicílios conectados à rede de telefonia fixa de cada uma das capitais dos 26 Estados brasileiros e do Distrito Federal (54.369 indivíduos no total, sendo pelo menos 2.000 por cidade). A amostragem foi realizada a partir de cadastros eletrônicos completos das linhas residenciais fixas de cada cidade, envolvendo sorteio de linhas (domicílios) e sorteio de um morador por linha para ser entrevistado. O questionário aplicado investigou características demográficas e socioeconômicas, padrão de alimentação e de atividade física, consumo de cigarros e de bebidas alcoólicas, e peso e altura recordados, entre outros quesitos. Estimativas sobre a freqüência de fatores de risco selecionados, estratificadas por sexo e acompanhadas de Intervalo de Confiança de 95%, foram calculadas para a população adulta de cada cidade empregando-se fatores de ponderação que igualam a composição sociodemográfica da amostra em cada cidade àquela observada no Censo Demográfico de 2000. Estimativas para o conjunto das cidades empregam fator de ponderação adicional que leva em conta a população de adultos de cada cidade. RESULTADOS: Os cinco fatores de risco selecionados (tabagismo, consumo abusivo de bebidas alcoólicas, excesso de peso, consumo de carnes com excesso de gordura e sedentarismo) tenderam a ser mais freqüentes em homens do que em mulheres. Dentre os fatores de proteção, o consumo regular de frutas e hortaliças foi mais freqüente em mulheres do que em homens, observando-se situação inversa no caso da atividade física de lazer. Diferenças substanciais na freqüência dos fatores de risco e proteção foram observadas entre as cidades, com padrões de distribuição regional diferenciados por fator. DISCUSSÃO: O desempenho do sistema, avaliado a partir da qualidade dos cadastros telefônicos e de taxas de resposta e de recusas, mostrou-se adequado e, de modo geral, superior ao encontrado em sistemas equivalentes existentes em países desenvolvidos. O custo do sistema de R$ 31,15 por entrevista realizada, foi a metade do custo observado no sistema americano de vigilância de fatores de risco para doenças crônicas por inquérito telefônico e um quinto do custo estimado em inquérito domiciliar tradicional realizado recentemente no Brasil.
Resumo:
OBJECTIVES: to assess quality of the primary care using respiratory diseases as a tracer. METHODS: the evaluative approach is based on Donabedian's referencial connected to Kessner's tracers methodology. The sample is formed by 768 children from 0 to 5 years old, presenting respiratory symptoms, attended at seven basic health units from the Sanitary District of Brasilândia, in the city of São Paulo, State of São Paulo, Brazil. Medical registrations and interviews with mothers or responsibles were the information sources. RESULTS: more accurate child medical examination evidences significant association with favorable evolution, mainly on moderate clinical forms. Although aspects related to the accessibility demonstrated by the health team seem to influence decisively on care quality evaluated by users, mainly the medical doctor. Mothers education level appears to have no influence in the favorable evolution. CONCLUSIONS: the tracer methodology has the potentiality to facilitate the critical analysis of the health care. It is important to focus on the outcome of the health care. The children respiratory diseases are important tracer for the quality assessment on health services.
Resumo:
Realizou-se um estudo para caracterizar a situação epidemiológica da brucelose bovina no Distrito Federal (DF). No total foram amostrados 2.019 animais, provenientes de 278 propriedades. Em cada propriedade visitada aplicou-se um questionário epidemiológico para verificar o tipo de exploração e as práticas de criação e sanitárias que poderiam estar associadas ao risco de infecção pela doença. O protocolo utilizado foi o da triagem com o teste do antígeno acidificado tamponado e a confirmação dos positivos com o teste do 2-mercaptoetanol. O rebanho foi considerado positivo quando pelo menos um animal foi reagente às duas provas sorológicas. A prevalência no DF foi de 2,5% [1,0-5,1%] para propriedades e de 0,16% [0,04-0,28%] para animais. Em razão dos resultados encontrados, que permitem pensar em estratégias de erradicação, recomenda-se que o DF intensifique o diagnóstico de brucelose, tanto na forma de testes sorológicos sistemáticos como pela introdução de mecanismos de detecção rápida em laticínios, em ambos os casos a fim de aumentar o número de propriedades certificadas como livres da doença e melhorar a sensibilidade do sistema de vigilância ativa.
Resumo:
O suprimento de tomates para processamento industrial é uma atividade relativamente complexa. Plantas industriais de larga escala necessitam de elevados volumes diários de matéria-prima. Por outro lado, há alta perecibilidade dos frutos e a colheita ainda é predominantemente manual. Um modelo matemático foi desenvolvido com o propósito de entender objetivamente o processo de suprimento de tomate e, também, vislumbrar possibilidades de sua otimização. A simulação a partir do modelo pode gerar cenários que, quando comparados com o desempenho efetivamente observado em campo, evidenciam a importância da gestão acurada, com a presença de potenciais ganhos financeiros expressivos na cadeia de suprimentos a partir da redução de tempos, perdas e custos. As perdas de produto poderiam ser reduzidas de mais de 2% para algo inferior a 1%. A menor capacidade ociosa traduzir-se-ia em um menor custo de oportunidade e aumento de receita. Para uma fábrica com um consumo de tomates de 336 mil toneladas por ano, a melhoria no suprimento de matéria-prima poderia resultar em ganhos estimados em R$ 6 milhões por ano.
Resumo:
Objetivo: Descrever métodos e resultados iniciais do Sistema de Vigilância de Fatores de Risco e Proteção para Doenças Crônicas ão Transmissíveis por Inquérito Telefônico - VIGITEL implantado no Brasil em 2006. Métodos: O VIGITEL estudou amostras probabilísticas da população com 18 ou mais anos de idade residente em domicílios conectados à rede de telefonia fixa de cada uma das capitais dos 26 Estados brasileiros e do Distrito Federal (54.369 indivíduos no total, sendo pelo menos 2.000 por cidade). A amostragem foi realizada a partir de cadastros eletrônicos completos das linhas residenciais fixas de cada cidade, envolvendo sorteio de linhas (domicílios) e sorteio de um morador por linha para ser entrevistado. O questionário aplicado investigou características demográficas e socioeconômicas, padrão de alimentação e de atividade física, consumo de cigarros e de bebidas alcoólicas, e peso e altura recordados, entre outros quesitos. Estimativas sobre a freqüência de fatores de risco selecionados, estratificadas por sexo e acompanhadas de Intervalo de Confiança de 95%, foram calculadas para a população adulta de cada cidade empregando-se fatores de ponderação que igualam a composição sociodemográfica da amostra em cada cidade àquela observada no Censo Demográfico de 2000. Estimativas para o conjunto das cidades empregam fator de ponderação adicional que leva em conta a população de adultos de cada cidade. Resultados: Os cinco fatores de risco selecionados (tabagismo, consumo abusivo de bebidas alcoólicas, excesso de peso, consumo de carnes com excesso de gordura e sedentarismo) tenderam a ser mais freqüentes em homens do que em mulheres. Dentre os fatores de proteção, o consumo regular de frutas e hortaliças foi mais freqüente em mulheres do que em homens, observando-se situação inversa no caso da atividade física de lazer. ) Diferenças substanciais na freqüência dos fatores de risco e proteção foram observadas entre as cidades, com padrões de distribuição regional diferenciados por fator.Discussão: O desempenho do sistema, avaliado a partir da qualidade dos cadastros telefônicos e de taxas de resposta e de recusas, mostrou-se adequado e, de modo geral, superior ao encontrado em sistemas equivalentes existentes em países desenvolvidos. O custo do sistema de R$ 31,15 por entrevista realizada, foi a metade do custo observado no sistema americano de vigilância de fatores de risco para doenças crônicas por inquérito telefônico e um quinto do custo estimado em inquérito domiciliar tradicional realizado recentemente no Brasil
Resumo:
MDF panels of Eucalyptus grandis wood fibers were made in either experimentally in a laboratory or on an industrial production line. In order to analyze the influence of the production condition, the anatomical, physical and mechanical properties of the panels were determined. The wood refining induced the transversal rupture of the transversal fiber wall. The MDF panels obtained from the industrial production line presented less swelling in thickness and absorption values and improved mechanical properties in the requirements of bending strength, module of elasticity and surface resistance. For laboratory MDF panels, it was possible to verify a statistically significant correlation between bending strength and module of elasticity, medium density and internal bond and swelling in thickness and absorption. This tendency was also true for the MDF panels obtained in real conditions of production, however without statistical significance. By comparing the quality properties of MDF panels produced in the laboratory with those obtained in real conditions of production, it was sought to standardize the established variables for obtaining panels on a small scale, as well to make possible the safe transfer and divulgation of information obtained in the laboratory.
Resumo:
Environmental quality assessment studies have been conducted with tree species largely distributed in the Atlantic Forest. Leaf and soil samples were collected in the conservation unit Parque Estadual da Serra do Mar (PESM) nearby the industrial complex of Cubatao, Sao Paulo State, Brazil, and analyzed for chemical elements by instrumental neutron activation analysis. Results were compared to background values obtained in the Parque Estadual Carlos Botelho (PECB). The higher As, Fe, Hg and Zn mass fractions in the tree leaves of PESM indicated anthropogenic influence on this conservation unit.
Resumo:
Although texts and wall paintings suggest that bees were kept in the Ancient Near East for the production of precious wax and honey, archaeological evidence for beekeeping has never been found. The Biblical term ""honey"" commonly was interpreted as the sweet product of fruits, such as dates and figs. The recent discovery of unfired clay cylinders similar to traditional hives still used in the Near East at the site of Tel Rehov in the Jordan valley in northern Israel suggests that a large-scale apiary was located inside the town, dating to the 10th-early 9th centuries B.C.E. This paper reports the discovery of remains of honeybee workers, drones, pupae, and larvae inside these hives. The exceptional preservation of these remains provides unequivocal identification of the clay cylinders as the most ancient beehives yet found. Morphometric analyses indicate that these bees differ from the local subspecies Apis mellifera syriaca and from all subspecies other than A. m. anatoliaca, which presently resides in parts of Turkey. This finding suggests either that the Western honeybee subspecies distribution has undergone rapid change during the last 3,000 years or that the ancient inhabitants of Tel Rehov imported bees superior to the local bees in terms of their milder temper and improved honey yield.
Resumo:
Tropical countries face special specific problems in implementing sustainable forest management (SFM). In many countries, questions are raised on whether tropical forests should be publicly, commonly or privately owned and managed in order to enhance sustainability. Other debates also focus on whether small-scale enterprises are better positioned than large-scale industrial concessions to reduce poverty and attain sustainable management. In countries where large tracts of forest are state-owned, concessions are viewed as a means of delivering services of public and collective interest through an association of private investment and public regulation. However, the success of an industrial concession model in countries with large forest resource endowment to achieve multiple goals such as sustainable forest management and local/regional development depends on two critical assumptions. First, forest functions and services should be managed and maintained as public goods. In many cases, additional uses - and corresponding rights - can take place alongside logging activities. Industrial concessions can be more efficient than other tenure models (such as community-based forest management and small-scale enterprises) in achieving SFM, add value to raw material and comply with growing environmental norms. This is especially the case in market-remote areas with low population density and poor infrastructure. Secondly, to achieve these different outcomes, any concession system needs to be monitored and regulated, especially in contexts dominated by asymmetrical information between regulating authorities and concessionaires. New institutional responses have recently been put forward in several countries, providing valuable materials to design a renewed policy mix which associates public and private incentives. This paper provides a survey of the experience of forest concessions in several Central African and South American countries. The concession system is examined in order to clarify the issues involved, the problems encountered, and what can be learned from the shared experience of these countries in the last decade. This paper argues that despite a sometimes patchy record, concessions can help promote SFM so long as they are packaged with a certain number of specific measures. (C) 2008 Elsevier B.V. All rights reserved.
Resumo:
The effects of alkaline treatments of the wheat straw with sodium hydroxide were investigated. The optimal condition for extraction of hemicelluloses was found to be with 0.50 mol/l sodium hydroxide at 55C for 2 h. This resulted in the release of 17.3% of hemicellulose (% dry starting material), corresponding to the dissolution of 49.3% of the original hemicellulose. The yields were determined by gravimetric analysis and expressed as a proportion of the starting material. Chemical composition and physico-chemical properties of the samples of hemicelluloses were elucidated by a combination of sugar analyses, Fourier transform infrared (FTIR), and thermal analysis. The results showed that the treatments were very effective on the extraction of hemicelluloses from wheat straw and that the extraction intensity (expressed in terms of alkali concentration) had a great influence on the yield and chemical features of the hemicelluloses. The FTIR analysis revealed typical signal pattern for the hemicellulosic fraction in the 1,200-1,000 cm(-1) region. Bands between 1,166 and 1,000 cm(-1) are typical of xylans.
Resumo:
Seven food grade commercially available lipases were immobilized by covalent binding on polysiloxane-polyvinyl alcohol (POS-PVA) hybrid composite and screened to mediate reactions of industrial interest. The synthesis of butyl butyrate and the interesterification of tripalmitin with triolein were chosen as model reactions. The highest esterification activity (240.63 mu M/g min) was achieved by Candida rugosa lipase, while the highest interesterification yield (31%, in 72 h) was achieved by lipase from Rhizopus oryzae, with the production of about 15 mM of the triglycerides C(50) and C(52). This lipase also showed a good performance in butyl butyrate synthesis, with an esterification activity of 171.14 mu M/g min. The results demonstrated the feasibility of using lipases from C. rugosa for esterification and R. oryzae lipase for both esterification and interesterification reactions.
Resumo:
This keynote paper aims at analyzing relevant industrial demands for grinding research. The chosen focus is to understand what are the main research challenges in the extensive industrial use of the process. Since the automotive applications are the most important driving forces for grinding development, the paper starts with an analysis on the main trends in more efficient engines and the changes in their components that will affect the grinding performance. A view from 23 machine tool builders is also presented based on a survey made in interviews and during the EMO and IMTS machine tool shows. Case studies received by the STC G members were used to show how research centers and industries are collaborating. A view from the authors and the final conclusions show hot topics for future grinding research. (C) 2009 CIRP.
Resumo:
Currently diverse industries have high pollution potential because their productive processes generate great volumes of refractory effluents. These effluents are problematic, mainly due to the presence of recalcitrant compounds that are detrimental in wastewater treatment plants using biological systems in their processes. In general, biological treatments do not remove refractory elements. Also, in most cases these compounds can inhibit the yield or are toxic for biota responsible to remove the polluting agents. The Advanced Oxidative Processes (AOPs) represent a technological alternative with a great potential for treatment of no biodegradable effluents. In this paper a review of the use of advanced oxidatives processes: Ozone (O(3)), peroxide of hydrogen (H(2)O(2)) and ultraviolet radiation (UV) is presented applied to the treatment of recalcitrant effluents.
Resumo:
Sao Paulo Research Foundation (FAPESP) in Brazil