Dissolution parameters for sodium diclofenac-containing hypromellose matrix tablet

Sodium diclofenac (SD) release from dosage forms has been studied under different conditions. However, no dissolution method that is discriminatory enough to reflect slight changes in formulation or manufacturing process, and which could be effectively correlated with the biological properties of the dosage form, has been reported. This study sought to develop three different formulae of SD-containing matrix tablets and to determine the effect of agitation speed in its dissolution profiles. F1, F2 and F3 formulations were developed using hypromellose (10, 20 and 30%, respectively for F1, F2 and F3) and other conventional excipients. Dissolution tests were carried out in phosphate buffer pH 6.8 at 37 degrees C using apparatus 11 at 50, 75 or 100 rpm. Dissolution efficiency (DE), T(50) and T(90) were determined and plotted as functions of the variables agitation speed and hypromellose concentration. Regarding DE, F2 showed more sensitivity to variations in agitation speed than F1 and F3. Increasing hypromellose concentration reduced DE values, independent of agitation speed. Analysis of T(50) and T(90) suggests that F1 is less sensitive to variations in agitation speed than F2 and F3. Most discriminatory dissolution conditions were observed at 50 rpm. Results suggest that the comparison of dissolution performance of SD matrix tablets should take into account polymer concentration and agitation conditions. (C) 2009 Published by Elsevier B.V.

Effect of meloxicam and diclofenac sodium on peri-implant bone healing in rats

Background: This study evaluated the effects of diclofenac sodium and meloxicam on peri-implant bone healing. Methods: Thirty male rats were divided into three groups: the control group (CG) received no drug; the diclofenac sodium group (DSG) received 1.07 mg/kg twice a day for 5 days; and the meloxicam group (MG) received 0.2 mg/kg daily for 5 days. A screw-shaped titanium implant was placed in the tibia. Fluorochromes, oxytetracycline (OxT), calcein (CA), and alizarin (AL), were injected at 7, 14, and 21 days, respectively, after implantation, and the animals were sacrificed 28 days after implant placement. The percentages of OxT-, CA-, and AL-labeled bone as well as the percentages of bone-to-implant contact (BIC), cortical bone area (CBA), and trabecular bone area (TBA) within the implant threads were evaluated. Results: Bone healing was delayed in the DSG during the first 14 days after implant placement (OxT-labeled bone: DSG: 5.3% +/- 7.3% versus CG: 13.2% +/- 9.8%, P= 0.002, and versus MG: 14.4% +/- 13.1%, P = 0.05). The percentages of BIC (DSG: 49.6% +/- 21.9%; MG: 67.1% +/- 22.8%; and CG: 68.1% +/- 22.8%) and CBA (DSG: 63.7% +/- 21.2%; MG: 82.7% +/- 12.4%; CG: 84.9% +/- 10.6%) were lower in the DSG compared to the MG and CG (P<0.001). The percentage of TBA was significantly greater in the DSG compared to the MG and CG (DSG: 36.3% +/- 21.2% versus MG: 17.3% +/- 12.7% and versus CG: 15.1% +/- 10.6%; P<0.001). Conclusion: Diclofenac sodium seemed to delay peri-implant bone healing and to decrease BIC, whereas meloxicam had no negative effect on peri-implant bone healing.

Amlodipine reduces the antimigratory effect of diclofenac in spontaneously hypertensive rats

Amlodipine, an antihypertensive drug, and diclofenac, an anti inflammatory drug, may generally be combined, particularly in elderly patients; therefore, the potential for their interaction is high. We aim to determine if amlodipine interferes with the antimigratory effect of diclofenac. For this, male spontaneously hypertensive rats (SHRs) were treated with either diclofenac (1 mg.kg(-1).d(-1), 15 d) alone or combined with amlodipine (10 mg.kg(-1).d(-1), 15 d). Leukocyte rolling, adherence, and migration were studied by intravital microscopy. Diclofenac did not change (180.0 +/- 2.3), whereas amlodipine combined (163.4 +/- 5.1) or not (156.3 +/- 4.3) with diclofienac reduced the blood pressure (BP) levels in SHR (183.1 +/- 4.4). Diclofenac and amlodipine reduced leukocyte adherence, migration, and ICAM-I expression, whereas only diclofenac reduced rolling leukocytes as well. Combined with amlodipine, the effect of the diclofenac was reduced. Neither treatment tested increased the venular shear rate or modified the venular diameters, number of circulating leukocytes, P-selectin, PECAM-1, L-selectin, or CD-18 expressions. No difference could be found in plasma concentrations of both drugs given alone or in association. In conclusion, amlodipine reduces leukocyte migration in SHR, reducing endothelial cell ICAM-1 expression. Amlodipine reduces the effect of the diclofenac, possibly by the same mechanism. A pharmacokinetic interaction as well as an effect on the other adhesion molecules tested could be discarded.

Nuclear Quadrupole Resonance: A Technique to Control Hydration Processes in the Pharmaceutical Industry

Pharmaceuticals can exist in many solid forms, which can have different physical and chemical properties. These solid forms include polymorphs, solvates, amorphous, and hydrates. Particularly, hydration process can be quite common since pharmaceutical solids can be in contact with water during manufacturing process and can also be exposed to water during storage. In the present work, it is proved that NQR technique is capable of detecting different hydrated forms not only in the pure raw material but also in the final product (tablets), being in this way a useful technique for quality control. This technique was also used to study the dehydration process from pentahydrate to trihydrate.

Case Report: Severe Rhabdomyolysis Caused by Plasmodium vivax Malaria in the Brazilian Amazon

Severe rhabdomyolysis (creatine phosphokinase = 29.400U/L) developed in a 16-year-old boy from Manaus. Brazil, after he started treatment with chloroquine for infection with Plasmodium vivax Treatment led to myoglobinuria and acute renal failure After hemodialysis. the patient improved and a muscle biopsy specimen showed no myophosphorylase or deaminase deficiency. This case of rhabdomyolysis associated with P vivax infection showed no comorbidities The pathogenesis is still unclear

Influence of parecoxib (cox-2 inhibitor) in experimental pleurodesis

Background: The intrapleural instillation of a sclerosing agent produces an inflammatory process frequently followed by pain. The treatment can include the use of analgesics or anti-inflammatory drugs. Previously, it was demonstrated (experimental studies) that corticoids and nonsteroidal anti-inflammatory drugs (diclofenac) reduce the inflammation and fibrosis produced by talc but not by transforming growth factor-P or silver nitrate. The objective of this study was to determine whether parecoxib (COX-2 inhibitor) affects pleurodesis induced by talc or silver nitrate. Methods: 140 rabbits received intrapleural. injection (2 mL) of 400 mg/kg of talc or 0.5% silver nitrate. A subgroup of 70 animals received additional daily intramuscular parecoxib (1 mg/kg). They were sacrificed at 4, 24, 48, 72 h or 7, 14, or 28 days after the procedure. The pleural fluid was quantified; biochemical examinations (glucose, lactic dehydrogenase, and proteins) and immunologic dosages (interleukin-8, vascular endothelial growth factor, and transforming growth factor-beta(1)) were analyzed in pleural fluid and blood. Finally, macro- and microscopic pleura and lung studies were performed. Results: Evaluation after 28 days demonstrated that parecoxib reduced pleural and pulmonary inflammation but not pleural adhesions. The changes were observed precociously (72 h) and were more evident after silver nitrate injection. Conclusion: Systemic parecoxib injection does not interfere with talc or silver nitrate pleurodesis. These results suggest that use of COX-2 inhibitors can be considered and depending of the results of other studies, recommended in human pleurodesis. (c) 2008 Elsevier Ltd. All rights reserved.

Non-steroidal anti-inflammatory drugs may modulate the protease activity of Candida albicans

The phenotypic pressure exerted by non-steroidal anti-inflammatory drugs (NSAIDs) on autochthonous and pathogenic microbiota remains sparsely known. In this study, we investigated if some NSAIDs increment or diminish the secretion of aspartyl-proteases (Sap) by Candida albicans grown under different phenotypes and oxygen availability using a set of SAP knock-out mutants and other set for genes (EFG1 and CPH1) that codify transcription factors involved in filamentation and protease secretion. Preconditioned cells were grown under planktonic and biofilm phenotypes, in normoxia and anoxia, in the presence of plasma concentrations of acetylsalicylic acid, diclofenac, indomethacin, nimesulide, piroxicam, ibuprofen, and acetaminophen. For diclofenac, indomethacin, nimesulide, and piroxicam the secretion rates of Sap by SAP1-6, EFG1. and CPH1 mutants were similar or, even, inferior to parental wildtype strain. This suggests that neither Sap 1-6 isoenzymes nor Efg1/Cph1 pathways may be entirely responsible for protease release when exposed to these NSAIDs. Ibuprofen and acetaminophen enhanced Sap secretion rates in three environmental conditions (normoxic biofilm, normoxic planktonic and anoxic planktonic). In other hand, aspirin seems to reduce the Sap-related pathogenic behavior of candidal biofilms. Modulation of Sap activity may occur according to candidal phenotypic state, oxygen availability, and type of NSAID to which the cells are exposed. (C) 2010 Elsevier Ltd. All rights reserved.

Identification of a novel ligand binding motif in the transthyretin channel

The design of therapeutic compounds targeting transthyretin (TTR) is challenging due to the low specificity of interaction in the hormone binding site. Such feature is highlighted by the interactions of TTR with diclofenac, a compound with high affinity for TTR, in two dissimilar modes, as evidenced by crystal structure of the complex. We report here structural analysis of the interactions of TTR with two small molecules, 1-amino-5-naphthalene sulfonate (1,5-AmNS) and 1-anilino-8-naphthalene sulfonate (1,8-ANS). Crystal structure of TTR: 1,8-ANS complex reveals a peculiar interaction, through the stacking of the naphthalene ring between the side-chain of Lys15 and Leu17. The sulfonate moiety provides additional interaction with Lys15` and a water-mediated hydrogen bond with Thr119`. The uniqueness of this mode of ligand recognition is corroborated by the crystal structure of TTR in complex with the weak analogue 1,5-AmNS, the binding of which is driven mainly by hydrophobic partition and one electrostatic interaction between the sulfonate group and the Lys15. The ligand binding motif unraveled by 1,8-ANS may open new possibilities to treat TTR amyloid diseases by the elucidation of novel candidates for a more specific pharmacophoric pattern. (C) 2009 Published by Elsevier Ltd.

Thermal behavior and stability of biodegradable spray-dried microparticles containing triamcinolone

Thermal analysis has been widely used for obtaining information about drug-polymer interactions and for pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles Of Poly (D,L-lactide-co-glycolide) (PLGA) containing triamcinolone (TR) in various drug:polymer ratios were produced by spray drying. The main purpose of this study was to study the effect of the spray-drying process not only on the drug-polymer interactions but also on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG), X-ray analysis (XRD), and infrared spectroscopy (IR). The evaluation of drug-polymer interactions and the pre-formulation studies were assessed using the DSC, TG and DTG, and IR. The quantitative analysis of drugs entrapped in PLGA microparticles was performed by the HPLC method. The results showed high levels of drug-loading efficiency for all used drug: polymer ratio, and the polymorph used for preparing the microparticles was the form B. The DSC and TG/DTG profiles for drug-loaded microparticles were very similar to those for the physical mixtures of the components. Therefore, a correlation between drug content and the structural and thermal properties of drug-loaded PLGA microparticles was established. These data indicate that the spray-drying technique does not affect the physico-chemical stability of the microparticle components. These results are in agreement with the IR analysis demonstrating that no significant chemical interaction occurs between TR and PLGA in both physical mixtures and microparticles. The results of the X-ray analysis are in agreement with the thermal analysis data showing that the amorphous form of TR prevails over a small fraction of crystalline phase of the drug also present in the TR-loaded microparticles. From the pre-formulation studies, we have found that the spray-drying methodology is an efficient process for obtaining TR-loaded PLGA microparticles. (C) 2008 Elsevier B.V. All rights reserved.