Troponina cardíaca T para estratificação de risco na insuficiência cardíaca crônica descompensada

FUNDAMENTO: As troponinas cardíacas são marcadores altamente sensíveis e específicos de lesão miocárdica. Esses marcadores foram detectados na insuficiência cardíaca (IC) e estão associadas com mau prognóstico. OBJETIVO: Avaliar a relação da troponina T (cTnT) e suas faixas de valores com o prognóstico na IC descompensada. MÉTODOS: Estudaram-se 70 pacientes com piora da IC crônica que necessitaram de hospitalização. Na admissão, o modelo de Cox foi utilizado para avaliar as variáveis capazes de predizer o desfecho composto por morte ou re-hospitalização em razão de piora da IC durante um ano. RESULTADOS: Durante o seguimento, ocorreram 44 mortes, 36 re-hospitalizações por IC e 56 desfechos compostos. Na análise multivariada, os preditores de eventos clínicos foram: cTnT (cTnT > 0,100 ng/ml; hazard ratio (HR) 3,95 intervalo de confiança (IC) 95%: 1,64-9,49, p = 0,002), diâmetro diastólico final do ventrículo esquerdo (DDVE >70 mm; HR 1,92, IC95%: 1,06-3,47, p = 0,031) e sódio sérico (Na <135 mEq/l; HR 1,79, IC95%: 1,02-3,15, p = 0,044). Para avaliar a relação entre a elevação da cTnT e o prognóstico na IC descompensada, os pacientes foram estratificados em três grupos: cTnT-baixo (cTnT < 0,020 ng/ml, n = 22), cTnT-intermediário (cTnT > 0,020 e < 0,100 ng/ml, n = 36) e cTnT-alto (cTnT > 0,100 ng/ml, n = 12). As probabilidades de sobrevida e sobrevida livre de eventos foram: 54,2%, 31,5%, 16,7% (p = 0,020), e 36,4%, 11,5%, 8,3% (p = 0,005), respectivamente. CONCLUSÃO: A elevação da cTnT está associada com mau prognóstico na IC descompensada, e o grau dessa elevação pode facilitar a estratificação de risco

Manufacture of ceramic membranes for application in demulsification process for cross-flow microfiltration

This paper describes the manufacture of tubular ceramic membranes and the study of their performance in the demulsification of soybean oil/water emulsions. The membranes were made by iso-static pressing method and micro and macro structurally characterized by SEM, porosimetry by mercury intrusion and determination of apparent density and porosity. The microfiltration tests were realized on an experimental workbench, and fluid dynamic parameters, such as transmembrane flux and pressure were used to evaluate the process relative to the oil phase concentration (analysed by TOC measurements) in the permeate. The results showed that the membrane with pores` average diameter of 1.36 mu m achieved higher transmembrane flux than the membrane with pores` average diameter of 0.8 mu m. The volume of open pores (responsible for the permeation) was predominant in the total porosity, which was higher than 50% for all tested membranes. Concerning demulsification, the monolayer membranes were efficacious, as the rejection coefficient was higher than 99%.

Manufacture and characterization of ultra and microfiltration ceramic membranes by isostatic pressing

This paper describes the manufacture of tubular UF and MF porous and supported ceramic membranes to oil/water emulsions demulsification. For such a purpose, a rigorous control was realized over the distribution and size of pores. Suspensions at 30 vol.% of solids (zirconia or alumina powder and sucrose) and 70 vol.% of liquids (isopropyl alcohol and PVB) were prepared in a jar mill varying the milling time of the sucrose particles, according to the pores size expected. The membranes were prepared by isostatic pressing method and structurally characterized by SEM, porosimetry by mercury intrusion and measurements of weight by immersion. The morphological characterization of the membranes identified the formation of porous zirconia and alumina membranes and supported membranes. The results of porosimetry analysis by mercury intrusion presented an average pore size of 1.8 mu m for the microfiltration porous membranes and for the ultrafiltration supported membranes, pores with average size of 0.01-0.03 mu m in the top-layer and 1.8 mu m in the support. By means of the manufacture method applied, it was possible to produce ultra and microfiltration membranes with high potential to be applied to the separation of oil/water emulsions. (C) 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.