Darcy`s law and the differential equation of motion

This note addresses the relation between the differential equation of motion and Darcy`s law. It is shown that, in different flow conditions, three versions of Darcy`s law can be rigorously derived from the equation of motion.

Dynamic Design of Piezoelectric Laminated Sensors and Actuators using Topology Optimization

Sensors and actuators based on piezoelectric plates have shown increasing demand in the field of smart structures, including the development of actuators for cooling and fluid-pumping applications and transducers for novel energy-harvesting devices. This project involves the development of a topology optimization formulation for dynamic design of piezoelectric laminated plates aiming at piezoelectric sensors, actuators and energy-harvesting applications. It distributes piezoelectric material over a metallic plate in order to achieve a desired dynamic behavior with specified resonance frequencies, modes, and enhanced electromechanical coupling factor (EMCC). The finite element employs a piezoelectric plate based on the MITC formulation, which is reliable, efficient and avoids the shear locking problem. The topology optimization formulation is based on the PEMAP-P model combined with the RAMP model, where the design variables are the pseudo-densities that describe the amount of piezoelectric material at each finite element and its polarization sign. The design problem formulated aims at designing simultaneously an eigenshape, i.e., maximizing and minimizing vibration amplitudes at certain points of the structure in a given eigenmode, while tuning the eigenvalue to a desired value and also maximizing its EMCC, so that the energy conversion is maximized for that mode. The optimization problem is solved by using sequential linear programming. Through this formulation, a design with enhancing energy conversion in the low-frequency spectrum is obtained, by minimizing a set of first eigenvalues, enhancing their corresponding eigenshapes while maximizing their EMCCs, which can be considered an approach to the design of energy-harvesting devices. The implementation of the topology optimization algorithm and some results are presented to illustrate the method.

Influence of Microstructures on Polarization Resistance and Hydrogen-Induced Cracking of a Micro-Alloyed Steel Submitted to Different Cooling Rates

The effect of different microstructures on the polarization resistance (Rp) and the hydrogen-induced cracking (HIC) of a micro-alloyed steel austenitized and submitted to different cooling rates was studied. Samples 19.1 x 6 x 2 mm, containing the whole thickness of the plate were extracted from a 20 mm plate and heat treated on a quenching dilatometer, were submitted to Rp and HIC corrosion tests. Both Rp and HIC tests followed as close as possible ASTM G59 and NACE standard TM0284-2003, in this case, modified only with regard to the size of the samples. Steel samples transformed from austenite by a slow cooling (cooling rate of 0.5 degrees C.s(-1)) showed higher susceptibility to hydrogen-induced cracking, with large cracks in the middle of the sample propagating along segregation bands, corresponding to the centerline of the plate thickness. For cooling rates of 10 degrees C.s(-1), only small cracks were found in the matrix and micro cracks nucleated at non-metallic inclusions. For higher cooling rates (40 degrees C.s(-1)) very few small cracks were detected, linked to non-metallic inclusions. This result suggests that structures formed by polygonal structures and segregation bands (were cutectoid microconstituents predominate) have higher susceptibility to HIC. Structures predominantly formed by acicular ferrite make it difficult to propagate the cracks among non-oriented and interlaced acicular ferrite crystals. Smaller segregation bands containing eutectoid products also help inhibit cracking and crack propagation; segregation bands can function as pipelines for hydrogen diffusion and offer a path of stress concentration for the propagation of cracks, frequently associated to non-metallic inclusions. Polarization resistance essays performed on the steel in theas received condition, prior to any heat treatment, showed larger differences between the regions of the plate, with a considerably lower Rp in the centerline. The austenitization heat treatments followed by cooling rates of 0.5 e 10 degrees C.s(-1) made more uniform the corrosion resistance along the thickness of the plate. The effects of heat treatments on the corrosion resistance are probably related to the microconstituent formed, allied to the chemical homogenization of the impurities concentrated on the centerline of the plate.

Modeling of Effect of Plastic Deformation on Barkhausen Noise and Magnetoacoustic Emission in Iron With 2% Silicon

Before one models the effect of plastic deformation on magnetoacoustic emission (MAE), one must first treat non-180 degrees domain wall motion. In this paper, we take the Alessandro-Beatrice-Bertotti-Montorsi (ABBM) model and modify it to treat non-180 degrees wall motion. We then insert a modified stress-dependent Jiles-Atherton model, which treats plastic deformation, into the modified ABBM model to treat MAE and magnetic Barkhausen noise (HBN). In fitting the dependence of these quantities on plastic deformation, we apply a model for when deformation gets into the stage where dislocation tangles are formed, noting two chief effects, one due to increased density of emission centers owing to increased dislocation density, and the other due to a more gentle increase in the residual stress in the vicinity of the dislocation tangles as deformation is increased.

Animated solid model of the lung constructed from unsynchronized MR sequential images

This work discusses a 4D lung reconstruction method from unsynchronized MR sequential images. The lung, differently from the heart, does not have its own muscles, turning impossible to see its real movements. The visualization of the lung in motion is an actual topic of research in medicine. CT (Computerized Tomography) can obtain spatio-temporal images of the heart by synchronizing with electrocardiographic waves. The FOV of the heart is small when compared to the lung`s FOV. The lung`s movement is not periodic and is susceptible to variations in the degree of respiration. Compared to CT, MR (Magnetic Resonance) imaging involves longer acquisition times and it is not possible to obtain instantaneous 3D images of the lung. For each slice, only one temporal sequence of 2D images can be obtained. However, methods using MR are preferable because they do not involve radiation. In this paper, based on unsynchronized MR images of the lung an animated B-Repsolid model of the lung is created. The 3D animation represents the lung`s motion associated to one selected sequence of MR images. The proposed method can be divided in two parts. First, the lung`s silhouettes moving in time are extracted by detecting the presence of a respiratory pattern on 2D spatio-temporal MR images. This approach enables us to determine the lung`s silhouette for every frame, even on frames with obscure edges. The sequence of extracted lung`s silhouettes are unsynchronized sagittal and coronal silhouettes. Using our algorithm it is possible to reconstruct a 3D lung starting from a silhouette of any type (coronal or sagittal) selected from any instant in time. A wire-frame model of the lung is created by composing coronal and sagittal planar silhouettes representing cross-sections. The silhouette composition is severely underconstrained. Many wire-frame models can be created from the observed sequences of silhouettes in time. Finally, a B-Rep solid model is created using a meshing algorithm. Using the B-Rep solid model the volume in time for the right and left lungs were calculated. It was possible to recognize several characteristics of the 3D real right and left lungs in the shaded model. (C) 2007 Elsevier Ltd. All rights reserved.

A new species of Abacarus (Acari: Prostigmata: Eriophyidae) damaging sugarcane, Sacharrum officinarum L., from Costa Rica-the first eriophyoid mite described with a tibial seta on leg II

A new species of eriophyoid mite, belonging in the genus Abacarus Keifer (Eriophyidae), causing damage to sugarcane, Saccharum officinarum L. (Poaceae), in Costa Rica is illustrated and described. Abacarus doctus n. sp. is the only eriophyoid species recorded so far with a tibial seta (l`) on the second pair of legs, an unexpected characteristic observed for the first time in the superfamily Eriophyoidea. Remarks on the phylogenetic and taxonomical aspects related to the presence of this seta are presented. Damage symptoms caused by this mite are presented as well as a key for Abacarus species described from sugarcane. In addition, the need to apply biosecurity procedures during sugarcane germplasm exchange to avoid dissemination of the new mite species is discussed.

Transient process in ice creams evaluated by laser speckles

When a coherent light beam is scattered from a colloidal medium, in the observation plane, appears a random grainy image known as speckle pattern. The time evolution of this interference image carries information about the ensemble-averaged dynamics of the scatterer particles. The aim of this work was to evaluate the use of dynamic speckles as an alternative tool to monitoring frozen foams formulated with glucose and fructose syrups. Ice creams, after preparation and packing, were stored at 18 degrees C. Changes in properties of products were analyzed by speckle phenomena at three room temperatures (20 degrees C, 25 degrees C and 30 degrees C), minute by minute, during 50 min. Two moments were identified in which samples activity achieved significant levels. These instants were associated, respectively, to ice crystals melting and to air bubbles dissipation into the food matrix causing motion of diverse structures. As expected, ice crystals melting was first in formulations containing fructose syrup, but for same samples, air losses were delayed. Speckle methodology was satisfactory to observe temporal evolution of transient process, opening goods prospects to application, still incoming, in foodstuffs researches. (C) 2010 Elsevier Ltd. All rights reserved.

Purification and characterization of Ts15, the first member of a new alpha-KTX subfamily from the venom of the Brazilian scorpion Tityus serrulatus

Voltage-gated potassium channel toxins (KTxs) are basic short chain peptides comprising 23-43 amino acid residues that can be cross-linked by 3 or 4 disulfide bridges. KTxs are classified into four large families: alpha-, beta-, gamma- and kappa-KTx. These peptides display varying selectivity and affinity for K(v) channel subtypes. In this work, a novel toxin from the Tityus serrulatus venom was isolated, characterized and submitted to a wide electrophysiological screening on 5 different subtypes of Nay channels (Na(V)1.4; Na(V)1.5; Na(V)1.6; Na(V)1.8 and DmNa(V)1) and 12 different subtypes of Kv channels (K(V)1.1 - K(V)1.6; K(V)2.1; K(V)3.1; K(V)4.2; K(V)4.3; Shaker IR and ERG). This novel peptide, named Ts15, has 36 amino acids, is crosslinked by 3 disulfide bridges, has a molecular mass of 3956 Da and pI around 9. Electrophysiological experiments using patch clamp and the two-electrode voltage clamp techniques show that Ts15 preferentially blocks K(V)1.2 and K(V)1.3 channels with an IC(50) value of 196 +/- 25 and 508 +/- 67 nM, respectively. No effect on Na(V) channels was observed, at all tested concentrations. Since Ts15 shows low amino acid identity with other known KTxs, it was considered a bona fide novel type of scorpion toxin. Ts15 is the unique member of the new alpha-Ktx21 subfamily and therefore was classified as alpha-Ktx21.1. (C) 2011 Elsevier Ltd. All rights reserved.

Azana atlantica, n.sp., with reduced mouthparts and two ocelli: first record of Azana for the Neotropical region (Diptera : Mycetophilidae : Sciophilinae)

A new Sciophilinae-Azana atlantica, sp. n. - is described from the Atlantic Forest in southeastern Brazil. The species has a number of distinctive apomorphic features, including loss of the mid ocellus, reduced mouthparts, Sc short and incomplete, first section of Rs missing, r-m elongated, longitudinal in position, aligned with the second section of Rs ( R(5)), unforked medial and cubital veins, R(4) missing, M(4) entirely absent, gonostyle triangular, with an inner row of elongated spines and a basal, digitiform inner projection. Some of these features are shared with other genera of the Azana-group of Sciophilinae. The shape of the scutum and the strong spines on the gonostyle make it clear that the species belongs in Azana, despite the features that are distinctive from the remaining species in the genus. There are ten species described in Azana to date, from United States, Europe, Sri Lanka, Canary Islands, tropical Africa and Baltic amber. This is the first Neotropical species belonging to the genus. The complete loss of M(4) and the separated gonocoxites suggest that Azana atlantica, sp. n. forms a monophyletic group with the Afrotropical species of the genus. Azana, Morganiella, Neoaphelomera, Neotrizygia, and Trizygia are shown to compose a small clade within the Azana-group of genera. The division of the genus into two subgenera - A. ( Azana) and A. ( Jugazana) - most probably renders A. ( Azana) paraphyletic and it is suggested that this should be for the time being abandoned.

Morphology of the first zoeal stage of the commensal southwestern Atlantic crab Austinixa aidae (Righi 1967) (Brachyura: Pinnotheridae), hatched in the laboratory

The first zoeal stage of the endemic southern Atlantic pinnotherid crab Austinixa aidae is described and illustrated based on laboratory-hatched material from ovigerous females collected from the upper burrows of the thalassinidean shrimp Callichirus major at Ubatuba, So Paulo, Brazil. The zoeae of Austinixa species can be distinguished from other pinnotherids and especially from zoeae of the closely related species of Pinnixa by the telson structure.

Revision of the larval morphology (Zoea I) of the family Hippolytidae (Decapoda, Caridea), with a description of the first stage of the shrimp Hippolyte obliquimanus Dana, 1852

The aim of this study was to summarize the available data on larval morphology of the first zoea of the family Hippolytidae and describe the first zoeal stage of H. obliquimanus from two geographically distinct populations, Brazilian and Caribbean in order to discuss inter- and intraspecific variability. Ovigerous females of Hippolyte obliquimanus were collected at Cahuita (Limon, Costa Rica) and at Ubatuba (Sao Paulo, Brazil). We compiled the published descriptions of all available hippolytid Zoea I (66 spp., 21%), and all zoeae share several characteristics. However, such morphological features cannot be used to distinguish the first zoeae of Hippolytidae from other caridean larvae. Historically, the presence of an exopodal seta at the maxillule and the absence of the anal spine/papilla have been considered as characteristic for the Zoea I of the genus Hippolyte. The results of our revision, however, did not support these conclusions: although H. obliquimanus showed an exopodal seta at the maxillule, four congeners did not bear such structure; moreover, H. obliquimanus as well as one other congener have an anal spine/papilla. All morphological characters observed in the first zoeal stage of H. obliquimanus are shared with others species of the family Hippolytidae. Intraspecific variability in Hippolyte obliquimanus was detected in one morphological aspect: the first zoea had four denticles on the ventral margin of the carapace in the Brazilian population, while specimens from the Costa Rican population had three.

The genus Phthinia Winnertz (Diptera, Mycetophilidae) in the Neotropical region, with the first records from Brazil

Three Neotropical species of Phthinia Winnertz have been described to date. The genus is known from Chile and southern Argentina. Four new species are herein described for the genus in the region, two from Brazil-Phthinia theresae, sp. n., from the State of Espirito Santo, and Phithinia urubici, sp. n., from the State of Santa Catarina-and two from Chile-Phthinia freemani, sp. n., and Phthinia parafurcata, sp. n. Comments are made about the relationships between the Neotropical species. Some notes are added about P. furcata Freeman, P. flagellata Freeman, and P. fasciata Freeman, from Chile and southern Argentina. Attention is called for the fact that Phthinia has two species in Brazil disjunct from the other temperate species of the genus in South America, differently from most similar cases, that have a single known representative in Brazil.

Triphora uniflora AC Ferreira, Baptista & Pansarin (Orchidaceae: Triphorcae): a new species and the first record of the genus Triphora Nutt. for Sao Paulo state, Brazil

(Triphora uniflora A.C. Ferreira, Baptista & Pansarin (Orchidaccae: Triphorcae): a new species and the first record of the genus Triphora Nutt. for Sao Paulo state, Brazil). Triphora uniflora A. C. Ferreira, Baptista & Pansarin, a new species of Orchidaceae, is described and illustrated. Furthermore, this is the first report of the genus Triphora for Sao Paulo state, Brazil. The relationship of this new species to other taxa of the genus and the need to preserve the natural habitat of this Triphora species are discussed.

First detection of lead in black paper from intraoral film An environmental concern

Lead (Pb) contamination in the black paper that recovers intraoral films (BKP) has been investigated. BKP samples were collected from the Radiology Clinics of the Dental School of Ribeirao Preto, University of Sao Paulo, Brazil. For sake of comparison, four different methods were used. The results revealed the presence of high lead levels, well above the maximum limit allowed by the legislation. Pb contamination levels achieved after the following treatments: paper digestion in nitric acid, microwave treatment, DIN38414-54 method and TCLP method were 997 mu g g(-1), 189 mu g g(-1), 20.8 mu g g(-1), and 54.0 mu g g(-1), respectively. Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma mass spectrometry (ICP-MS) were employed for lead determination according to the protocols of the applied methods. Lead contamination in used BKP was confirmed by scanning electron microscopy coupled with energy dispersive X-ray microanalysis (SEM-EDS). All the SEM imaging was carried out in the secondary electron mode (SE) and backscattered-electron mode (QBSD) following punctual X-ray fluorescence spectra. Soil contamination derived from this product revealed the urgent need of addressing this problem. These elevated Pb levels, show that a preliminary treatment of BKP is mandatory before it is disposed into the common trash. The high lead content of this material makes its direct dumping into the environment unwise. (C) 2009 Elsevier B.V. All rights reserved.

Tricho-rhino-phalangeal syndrome: first brazilian case

Thrico-rhino-falangeal syndrome is a rare genetic disease characterized by the presence of typical alterations with a long, bulbous nose, hair alterations, a long flat philtrum, and one-shaped epiphyses of the phalanges. We describe herein the first Brazilian case of a 24-year-old woman with thrico-rhino-falangeal syndrome type I. Physical examination demonstrated typical nose and hair abnormalities, and one-shaped epiphyses of the phalanges, and the genetic study confirmed the diagnosis. Thrico-rhino-falangeal syndrome is characterized by musculoskeletal alterations that at the first view may simulate juvenile idiopathic arthritis. These musculoskeletal deformities could imply the differential diagnosis with rheumatic diseases.