Práticas corporais: atividade física e políticas públicas de promoção da saúde

A promoção da saúde, entendida como estratégia de produção social de saúde, deve articular e permear políticas públicas que influenciem o futuro da qualidade de vida urbana. Esse grande desafio envolve arranjos intersetoriais na gestão pública, empoderamento da população, desenvolvimento de competências e habilidades, capacitação, acesso à informação, estímulo à cidadania ativa, entre outros, para que a população reconheça seus problemas e suas causas, a fim de que ela possa advogar por políticas públicas saudáveis. Para esse propósito, é necessário que o governo operacionalize uma forma de gestão pública que considere a melhoria nas condições de vida, de trabalho e de cultura, estabelecendo uma relação harmoniosa com o meio ambiente, com o corpo que envolva a participação social na cogestão e na democracia. Nesse contexto, a inserção de um programa de práticas corporais/atividade física direcionada à população deve estar fundamentada em uma concepção da Promoção da Saúde apoiada em processos educativos que vão além da transmissão de conhecimentos. Ela deve estar focada no enfrentamento das dificuldades, no fortalecimento da identidade e na incorporação de soluções criativas e saberes saudáveis. Este artigo tem o objetivo de refletir sobre políticas de promoção da saúde relacionadas às Práticas Corporais/Atividade Física, além de apresentar um breve relato sobre o trabalho desenvolvido nessa área no município de São Paulo

Avaliação participativa e a efetividade da promoção da saúde: desafios e oportunidades

Apresenta as iniciativas globais de avaliação da Promoção da saúde que vêm ocorrendo desde 1995, bem como a inserção dos profissionais brasileiros nas mesmas, especialmente na iniciativa de avaliação participativa. Detém-se a explicitar o conceito de efetividade, diferenciando-o do de eficiência e eficácia, apoiando-se em conceitos de autores locais que se dedicam à avaliação de políticas. Há um aprofundamento do conceito de avaliação participativa de acordo com autores que se dedicam à promoção da saúde, e são apresentados os desafios e oportunidades desse tipo de avaliação. Finalmente, é ressaltada a experiência brasileira do Guia de Avaliação Participativa, que foi construído nos últimos dez anos com a participação de profissionais de todo o continente americano. À guisa de conclusão, são apresentados os aspectos positivos da avaliação participativa, especialmente os de cidades e comunidades saudáveis

Registro de Aedes albopictus em áreas epizoóticas de febre amarela das Regiões Sudeste e Sul do Brasil (Díptera:Culicidae)

Durante estudo biológico e ecológico sobre mosquitos levado a cabo em área com registro de epidemia de febre amarela silvestre e epizootia em macacos, foram encontrados adultos de Aedes Albopictus. A tendência da espécie para invadir ambiente extradomiciliar potencializa a chance de infecção natural, ao tempo em que evolui para formar um elo entre focos naturais de vírus e o ambiente urbano. Esta Nota Técnica representa um alerta aos gestores dos três poderes públicos sobre perspectivas de mudanças no perfil epidemiológico atual da febre amarela no Brasil

Crystallisation behaviour and glass-forming ability in Al-La-Ni system

The crystallisation behaviour for alloys in the Al-rich corner in the Al-La-Ni system is reported in this paper Alloys were selected based on the topological instability criterion (lambda criterion) calculated from the alloy composition and metallic radii of the alloying elements and aluminum Amorphous ribbons were produced by melt-spinning and the crystallisation reactions were analysed by X-ray diffraction and calorimetry The results showed that increasing the values of lambda from 0.072 to 0.16 resulted in the following changes in the crystallisation behaviour, as predicted by the lambda criterion (a) nanocrystallisation of alpha-Al for the alloy composition corresponding to lambda = 0 072 and (b) detection of the glass transition temperature, T(g), for the alloys with composition close to lambda approximate to 0.1 line. For compositions corresponding to both ends of the lambda approximate to 0 1 line (near the binaries lines) T(g) could be detected only in the ""intermediary"" central region, and the alloy we produced in this region was considered the best glass former for the Al-rich corner Also, except for the alloys with the highest NI content, crystallisation proceeded by two distinct exothermic peaks which are typical of nanocrystallisation transformation. These behaviours are discussed in terms of compositional (lambda parameter) and topological aspects to account for cluster formation in the amorphous phase. Crown Copyright (C) 2009 Published by Elsevier B V All rights reserved

Anaerobic fluidized bed reactor with expanded clay as support for hydrogen production through dark fermentation of glucose

This study evaluated hydrogen production in an anaerobic fluidized bed reactor (AFBR) fed with glucose-based synthetic wastewater. Particles of expanded clay (2.8-3.35 mm) were used as a support material for biomass immobilization. The reactor was operated with hydraulic retention times (HRT) ranging from 8 to 1 h. The hydrogen yield production increased from 1.41 to 2.49 mol H(2) Mol(-1) glucose as HRT decreased from 8 to 2 h. However, when HRT was 1 h, there was a slight decrease to 2.41 mol H(2) Mol(-1) glucose. The biogas produced was composed of H(2) and CO(2), and the H(2) content increased from 8% to 35% as HRT decreased. The major soluble metabolites during H(2) fermentation were acetic acid (HAc) and butyric acid (HBu), accounting for 36.1-53.3% and 37.7-44.9% of total soluble metabolites, respectively. Overall, the results demonstrate the potential of using expanded clay as support material for hydrogen production in AFBRs. (c) 2008 International Association for Hydrogen Energy. Published by Elsevier Ltd. All rights reserved.

Biodeterioration of painted mortar surfaces in tropical urban and coastal situations: Comparison of four paint formulations

Four different architectural acrylic paint formulations were tested by exposure to weathering for 7 years in the urban site of Sao Paulo and the coastal site of Ubatuba, South-East Brazil. Surface discolorations and detachment of coatings were assessed and the components of the biofilms were identified by standard microbiological methods. The painted surfaces of the mortar panels were much more discolored in Ubatuba, where major components of the biofilms were the cyanobacteria Gloeocapsa and Scytonema. In two of the four paint films, a pink coloration on the surface at this coastal site, caused mainly by red-pigmented Gloeocapsa, produced high discoloration ratings, but low degradation (as measured by detachment). Biofilms in Sao Paulo contained the same range of phototrophs, but in lesser quantity. However, fungal numbers, as determined by plating, were higher. Detachment ratings in this urban site were only slightly lower than in Ubatuba. The matt paint performed worst of the four, with silk and semi-gloss finishes giving lowest biodeterioration ratings. The matt elastomeric paint performed well at both sites, apart from becoming almost 100% covered by the pink biofilm in Ubatuba. Unpainted mortar panels became intensely discolored with a black biofilm, showing that all the paints had achieved one of their objectives, that of surface protection of the substrate. The value of PVC (pigment volume content) as an indicator of coatings biosusceptibility, is questioned. (C) 2011 Elsevier Ltd. All rights reserved.

Discoloration and fungal growth on three fiber cement formulations exposed in urban, rural and coastal zones

Three formulations of fiber cement were evaluated for fungal colonization and color change after five years of exposure in aging stations located in urban (Sao Paulo), rural (Pirassununga) and coastal (Rio Grande) zones in Brazil. The lowest color change and fungal colonization were registered in Rio Grande, which has a temperate climate, as opposed to Sao Paulo and Pirassununga, which are tropical. The highest fungal colonization was recorded in Sao Paulo, one of the most air polluted cities in Brazil. Pirassununga samples had an intermediate fungal colonization, in spite of showing the highest color change with visible dark spots on the surfaces. These spots were identified as cyanobacteria, which significantly contributed to the darkening of the specimens. The fiber cement formulation, varying in proportion of organic fibers such as poly (vinyl alcohol) and cellulose, was less significant for fungal bioreceptivity than the characteristics of the exposure site. The most frequent fungal genus found in the tropical climate, in both urban and rural zones, and the main one responsible for the higher records in Sao Paulo, was Scytalidiurn sp. which was registered for the first time on this building material in Brazil. (C) 2010 Elsevier Ltd. All rights reserved.

Sand bioconsolidation through the precipitation of calcium carbonate by two ureolytic bacteria

Two ureolytic strains, B. sphaericus LMG 22257 and Bacillus sp (I-001), were tested for their ability to consolidate sand by submitting them to two days` treatment using 10(7) viable cell concentrations of inocula and medium precipitation with calcium ions. The results showed that B. sphaericus LMG 22257 induced greater calcium carbonate formation. Both strains produced calcite and were able to consolidate sand. Tensile strength of consolidated sand was not a function of the amount of precipitated CaCO(3) but a linear function of the ratio bioconsolidation index (BC) defined as the ratio of CaCO(3) volume to initial sand porosity. A simple model to estimate the engineering benefits of consolidation is proposed. (C) 2011 Elsevier B.V. All rights reserved.