Preparation and characterization of ethanol-treated silk fibroin dense membranes for biomaterials application using waste silk fibers as raw material

The possibility of producing valued devices from low cost natural resources is a subject of broad interest. The present study explores the preparation and characterization of silk fibroin dense membranes using waste silk fibers from textile processing. Morphology, crystallinity, thermal resistance and cytotoxicity of membranes as well as the changes on the secondary structure of silk fibroin were analyzed after undergoing treatment with ethanol. Membranes presented amorphous patterns as determined via X-ray diffraction. The secondary structure of silk fibroin on dense membranes was either random coil (silk I) or p-sheet (silk II), before and after ethanol treatment, respectively. The sterilized membranes presented no cytotoxicity to endothelial cells during in vitro assays. This fact stresses the material potential to be used in the fabrication of biomaterials, as coatings of cardiovascular devices and as membranes for wound dressing or drug delivery systems. (C) 2010 Elsevier Ltd. All rights reserved.

Morphology of the first zoeal stage of the commensal southwestern Atlantic crab Austinixa aidae (Righi 1967) (Brachyura: Pinnotheridae), hatched in the laboratory

The first zoeal stage of the endemic southern Atlantic pinnotherid crab Austinixa aidae is described and illustrated based on laboratory-hatched material from ovigerous females collected from the upper burrows of the thalassinidean shrimp Callichirus major at Ubatuba, So Paulo, Brazil. The zoeae of Austinixa species can be distinguished from other pinnotherids and especially from zoeae of the closely related species of Pinnixa by the telson structure.

Influence of gender on the clinical and laboratory spectra of patients with primary antiphospholipid syndrome

The objectives of this cross-sectional study were to evaluate the differences between males and females in the clinical and biochemical manifestations of primary antiphospholipid antibody syndrome (PAPS). The method involved 49 patients (38 premenopausal females and 11 males) diagnosed with PAPS (according to the Sapporo criteria) and their demographic data, clinical data, medications used and antiphospholipid antibodies were analyzed. The results of this study are as follows. Both the groups of patients were statistically similar regarding age, race, weight and body mass index. However, males were significantly taller than females (172 +/- A 8.9 vs. 159.2 +/- A 6.2 cm, p < 0.0001). The duration of disease was similar for females and males. The prevalence of pulmonary thromboembolism was higher in females than in males (34.2 vs. 0.0%, p = 0.024). Regarding other PAPS manifestations (arterial events, venous events, deep venous thrombosis, thrombocytopenia, acute myocardial infarction, angina, cerebrovascular accidents and Sneddon syndrome), comorbidities (arterial hypertension and dyslipidemia), lifestyle (physical activity, previous smoking and current smoking) and the use of medications (current and previous use of corticosteroids, as well as the use of statins or chloroquine), both groups were statistically similar (p > 0.05). More females than males tested positive for IgM anticardiolipin antibodies (76.3 vs. 36.4%, p = 0.025) or for at least one of the antiphospholipid antibodies tested (either IgM anticardiolipin or IgG anticardiolipin 84.2 vs. 45.5%, p = 0.016). However, both groups were similar regarding the frequency of positivity for lupus anticoagulant and isolated IgG anticardiolipin, as well as regarding mean levels of IgG and IgM anticardiolipin (p > 0.05). We concluded that, among PAPS patients, the frequency of pulmonary thromboembolism and of positivity for IgM anticardiolipin is higher in females than in males. Our findings show that there are gender differences in PAPS, differences that might be related to alterations in sex hormones.

Effects of Salivary Gland Homogenate from Wild-Caught and Laboratory-Reared Lutzomyia longipalpis on the Evolution and Immunomodulation of Leishmania (Leishmania) amazonensis Infection

We investigated the effects of Lutzomyia longipalpis salivary glands homogenate of wild-caught and laboratory-reared vectors on the lesion evolution and immunomodulation of the infection caused by Leishmania (Leishmania) amazonensis. To compare the effect of both salivary glands homogenate (SGH), C57BL/6 mice were inoculated Subcutaneously into the hind footpads or into the ear dermis with 10(6) promastigotes in the presence or not of SGH from wild-caught and laboratory-colonized sand flies. Comparing SGH groups, the lesion size was lower in mice co-inoculated with wild-caught SGH, as the parasitism and the infiltration of macrophages at the inoculation site. Wild-caught SGH also determined lower production of IL-4 and IL-10 but higher IL-12 levels compared with laboratory-reared SGH. Our findings address a probable bias by using SGH from laboratory-colonized sand flies instead of wild-caught vector SGH in studies concerning saliva effects. A possible mild influence of sand fly saliva in natural infections caused by Leishmania is also speculated, as infection is transmitted by wild and not by laboratory-reared vectors.

Saliva of laboratory-reared Lutzomyia longipalpis exacerbates Leishmania (Leishmania) amazonensis infection more potently than saliva of wild-caught Lutzomyia longipalpis

In order to compare the saliva effect from wild-caught and lab-reared L. longipalpis on the development of experimental cutaneous leishmaniasis, C57BL/6 mice were inoculated subcutaneously into the hind footpads with promastigotes of L (L.) amazonensis Plus salivary gland lysate from wild-caught (SGL-W) and lab-colonized (SGL-C) vectors. Lesion sizes were significantly larger in the mice infected with both saliva compared to mice infected with parasites alone; moreover, the lesions caused by parasite+SGL-C were significantly larger than the lesions caused by parasite+SGL-W. Histopathological morphometric studies regarding the acute phase of infections showed lower numbers of polymorphonuclear cells, greater numbers of mononuclear cells and parasites in SGL-C infected mice compared to SGL-W infected mice. In the chronic phase of infection, the number of mononuclear cells was lower and the number of parasites was greater in SGL-C infected mice than SGL-W infected mice. In vitro studies showed increased infection index of macrophages infected with parasites plus saliva compared to infection with parasites alone, with no difference between the saliva infection indices. SDS-PAGE gel for SGL-C and SGL-W showed differences in the composition and quantity of protein bands, determined by densitometry. These results call attention to the experimental saliva model, which shows exacerbation of infection caused by sandfly saliva. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

Tuberculous meningitis in HIV-infected patients in Brazil: clinical and laboratory characteristics and factors associated with mortality

Background: Tuberculous meningitis (TBM) is a growing problem in HIV-infected patients in developing countries, where there is scarce data about this co-infection. Our objectives were to analyze the main features and outcomes of HIV-infected patients with TBM. Methods: This was a retrospective study of HIV-infected Brazilian patients admitted consecutively for TBM. All patients had Mycobacterium tuberculosis isolated from the cerebrospinal fluid (CSF). Presenting clinical and laboratory features were studied. Multivariate analysis was used to identify variables associated with death during hospitalization and at 9 months after diagnosis. Survival was estimated using the Kaplan-Meier method. Results: We included 108 cases (median age 36 years, 72% male). Only 15% had fever, headache, and meningeal signs simultaneously. Forty-eight percent had extrameningeal tuberculosis. The median CD4+ cell count was 65 cells/mu l. Among 90 cases, 7% had primary resistance to isoniazid and 9% presented multidrug-resistant strains. The overall mortality during hospitalization was 29% and at 9 months was 41%. Tachycardia and prior highly active antiretroviral therapy (HAART) were associated with 9-month mortality. The 9-month survival rate was 22% (95% confidence interval 12-43%). Conclusions: Clinical and laboratory manifestations were unspecific. Disseminated tuberculosis and severe immunosuppression were common. Mortality was high and the 9-month survival rate was low. Tachycardia and prior HAART were associated with death within 9 months of diagnosis. (C) 2009 International Society for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Polymerase chain reaction compared to other laboratory findings and to clinical evaluation in the diagnosis of cutaneous tuberculosis and atypical mycobacteria skin infection

Cutaneous tuberculosis has re-emerged in the last 15 years together with the higher incidence of pulmonary tuberculosis and multidrug resistance. The choice for a single diagnostic tool among the many available today is a challenge. Our objective was to compare polymerase chain reaction (PCR) with other exams in the diagnosis of cutaneous tuberculosis and atypical mycobacteria skin infection. PCR and a set of five different exams were performed in 32 patients (34 samples of paraffin-embedded tissue) evaluated for 3 years in a university hospital, considering the response to mycobacterial infection treatment as a positive case. PCR was the most sensitive (88%) and specific (83%) exam. Culture, immunohistochemistry and acid-fast bacilli were not in agreement with clinical response to treatment. Although PCR is a useful tool, careful clinical exam is still the gold standard for the evaluation and treatment of cutaneous tuberculosis and mycobacteria skin infection.

Neurosyphilis in HIV-infected patients: Clinical manifestations, serum venereal disease research laboratory titers, and associated factors to symptomatic neurosyphilis

Goal: To describe clinical and laboratory features of human immunodeficiency infection (HIV)-infected patients with neurosyphilis. Study Design: Retrospective study of 27 consecutive cases of HIV-infected patients with a positive Venereal Disease Research Laboratory (VDRL) in cerebrospinal fluid (CSF). Results: Median of age was 36 years and 89% were men. Ten (37%) patients had previous nonneurologic syphilis treatment. At the time of neurosyphilis diagnosis, 10 (37%) patients had early syphilis, and 6 of them were neurologically asymptomatic. Nine (33%) patients had symptomatic neurosyphilis. Twenty-six (96%) patients were classified with early neurosyphilis. The medians of serum VDRL and CD4(+) T cell counts were 1:128 and 182 cell/mu L, respectively. Twenty five (93%) patients presented serum VDRL titers >= 1:16. Five of 6 patients with early syphilis and asymptomatic neurosyphilis, presented serum VDRL >= 1:16. Symptomatic patients showed lower CD4(+) T cell counts (59 cell/mu L vs. 208 cell/mu L, P = 0.03) and higher protein concentration on CSF (118 mg/dL vs. 39 mg/dL, P <0.001) than asymptomatic patients. Conclusions: Most patients had early and asymptomatic neurosyphilis, and more than one third had early syphilis. Patients with symptomatic neurosyphilis showed lower CD4(+) T cell counts and higher protein concentration on CSF than those asymptomatic. Most patients had serum VDRL titers >= 1:16, regardless of syphilis stage.

Characterization of a chromium-rich tannery waste and its potential use in ceramics

Leather industries which promote hide stabilization by the conventional chrome-tanning process are a major source of pollution because of the resultant chromium-rich wastes. In this work, an extensive characterization of such a chromium-rich waste sludge is presented, regarding its chemical composition (XRF), crystalline phase contents (XRD), organic carbon content (TOC), thermal behavior by thermogravimetry (TG) and differential scanning calorimetry (DSC), as well as its stability under chemical attack (the concentration of important ions in the leachates being determined by capillary electrophoresis) and when submitted to temperatures as high as 1100 degrees C, in air. The material showed the tendency to produce some undesirable, and previously non-detected hexavalent chromium when exposed to high temperatures, but after washing off the soluble salts and the elimination of the organic matter by firing, the resultant material was succesfully tested as a ceramic pigment in a conventional glaze composition usually employed in the ceramic the industry. (C) 2009 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

The effect of temperature and fasting period on the viability of free-living females of Rhipicephalus sanguineus (Acari : Ixodidae) under laboratory conditions

Little is known about the effect of temperature on viability of free-living phases of the life cycle of Rhipicephalus sanguineus (Latreille, 1806) despite of its importance as vector of several pathogens. Knowledge of the effect of abiotic factors on the capacity of a given tick species to infest new hosts is important for routine experimental activities under laboratory conditions, and may be relevant to understand the transmission of pathogens. The study evaluates the viability of R. sanguineus females held at 18 +/- 1, 27 +/- 1 and 32 +/- 1 degrees C and 80 +/- 5% RH (saturation deficits of 3.0, 5.3 and 7.2 mmHg, respectively) for three fasting periods (3 and 20 days and the day when female mortality reached approximately 50% after ecdysis), under laboratory conditions. In general, the best result on viability was obtained when rabbits were infested with unfed female ticks after three or 20 fasting days at both 27 +/- 1 and 32 +/- 1 degrees C and 80 +/- 5% RH.

Biological aspects of Amblyomma brasiliense (Acari : Ixodidae) under laboratory conditions

Although Amblyomma brasiliense Arag (a) over tildeo 1908 has been reported as one of the most aggressive ticks to humans in Brazil, information about the biology of this tick species is virtually inexistent. This work reports data on the life cycle of A. brasiliense fed on rabbits and pigs and maintained in an incubator at 20 degrees C, 90% RH and 12 h of light for off-host development. Tick yield of adult females fed on pigs and rabbits was 81.2% and 58.3%, respectively. Females fed on pigs had mean engorgement weight of 862.3 mg and egg mass of 208 mg, while females fed on rabbits had mean engorgement weight of 606.1 mg and egg mass of 160 mg; these values did not differ statistically between host species. Feeding period of female ticks fed on pigs (10 days) was significantly shorter than that on rabbits (17 days). Mean preoviposition period was slightly longer (35.9 days) for ticks fed on pigs than on rabbits (30 days). The minimum incubation period of eggs of ticks from both host species was similar and over 100 days. Egg production efficiency was low for females fed on both hosts (less than 30% and 20% for ticks from pigs and rabbits, respectively). More than 55% of larvae and 79% of nymphs fed on rabbits, set free inside the feeding chambers, engorged successfully. These ticks attained an engorgement weight of 1.3 and 18.2 mg, respectively, and fed for approximately 5 days. The minimum pre-molt period was 30 days for engorged larvae and over 44 days for nymphs. Molting success was low, less than 50% in the case of larvae and less than 20% for nymphs. Further studies are required to better determine the off-host requirements of this tick species.

Life cycle of Ixodes luciae (Acari: Ixodidae) in the laboratory

The life cycle of Ixodes luciae was evaluated for five consecutive generations in the laboratory. Wild mice Calomys callosus and laboratory rats Rattus norvegicus were used as hosts for larvae and nymphs. For adult ticks, opossums Didelphis aurita were used as hosts. Off-host developmental periods were observed in an incubator at 27A degrees C and 95% RH. The life cycle of I. luciae lasted 95-97 days, excluding prefeeding periods. C. callosus, one of the natural host species for I. luciae immature stages, was shown to be much more suitable than the artificial host R. norvegicus. Significantly (P < 0.05), more larvae and nymphs successfully fed on C. callosus than on R. norvegicus. When tick-na < ve C. callosus were exposed to three consecutive larval infestations at 24-day intervals, recovery of engorged larvae were greater in the second and third infestations, indicating that previous infestations did not induce acquired resistance to ticks. Larval feeding period typically varied from 5 to 10 days on R. norvegicus, but was significantly (P < 0.05), longer on C. callosus (range, 7-34 days). The majority (71.7%) of I. luciae adult females successfully fed and oviposited after exposed to D. aurita. Mean engorged weight (581.9 mg; range, 237.1-796.0 mg) of these females were much higher than those previously reported for other New World Ixodes species. Our results are in accordance to the current literature that appoints opossums Didelphidae and small rodents (e.g., C. callosus) natural hosts for I. luciae immature and adult stages, respectively.

Clinical versus laboratory adhesive performance to wet and dry demineralized primary dentin

Purpose: To evaluate the influence of dentin moisture on bond strengths of an etch-and-rinse bonding agent to primary dentin clinically and in the laboratory. Methods: The sample consisted of two groups of 20 caries-free primary second molars: molars in exfoliation period (clinical group) and extracted molars (laboratory group). Class I cavities were prepared in all specimens leaving a flat dentin surface on the pulpal floor. A two-step etch-and-rinse adhesive was vigorously rubbed on either dry (n= 5) or wet demineralized dentin (n= 5) under clinical or laboratory conditions. After restorative procedures, the teeth from the clinical group were extracted after 20 minutes. All samples were processed and underwent microtensile bond strength test and silver nitrate uptake evaluation under scanning electron microscopy. Results: Statistically higher bond strength values were observed when the bonding was performed under laboratory conditions and on a wet demineralized dentin. Most of the failures were adhesive and mixed irrespective of the experimental condition. Silver nitrate uptake occurred in all groups irrespective of the experimental condition. Resin-dentin bond strengths produced in the laboratory in primary teeth may overestimate those produced under clinical circumstances. (Am J Dent 2011;24:221-225).

Thermal/mechanical simulation and laboratory fatigue testing of an alternative yttria tetragonal zirconia polycrystal core-veneer all-ceramic layered crown design

This study evaluated the stress levels at the core layer and the veneer layer of zirconia crowns (comprising an alternative core design vs. a standard core design) under mechanical/thermal simulation, and subjected simulated models to laboratory mouth-motion fatigue. The dimensions of a mandibular first molar were imported into computer-aided design (CAD) software and a tooth preparation was modeled. A crown was designed using the space between the original tooth and the prepared tooth. The alternative core presented an additional lingual shoulder that lowered the veneer bulk of the cusps. Finite element analyses evaluated the residual maximum principal stresses fields at the core and veneer of both designs under loading and when cooled from 900 degrees C to 25 degrees C. Crowns were fabricated and mouth-motion fatigued, generating master Weibull curves and reliability data. Thermal modeling showed low residual stress fields throughout the bulk of the cusps for both groups. Mechanical simulation depicted a shift in stress levels to the core of the alternative design compared with the standard design. Significantly higher reliability was found for the alternative core. Regardless of the alternative configuration, thermal and mechanical computer simulations showed stress in the alternative core design comparable and higher to that of the standard configuration, respectively. Such a mechanical scenario probably led to the higher reliability of the alternative design under fatigue.

Laboratory evaluation of the physicochemical properties of a new root canal sealer based on Copaifera multijuga oil-resin

Aim To compare a new root canal sealer based on Copaifera multijuga oil-resin (Biosealer) using three other established sealers (Sealer 26 (R), Endofill (R) and AH plus (R)) in terms of their physicochemical properties. Methodology The study was carried out according to the requirements of Specification Number 57 of the American Dental Association (ADA) and consisted of the following tests: setting time, flow, film thickness, dimensional stability, radiopacity and solubility/disintegration. Data were analysed statistically using anova and Tukey`s test for multiple comparisons. The significance level was set at 5% for all analyses. Results Sealer 26 (R) and AH Plus (R) had the longest setting time (P < 0.05). All materials presented flow in with the ADA`s guidelines. Regarding film thick-ness, Sealer 26 (R) did not have a satisfactory performance, as it had a higher mean value than the maximum allowed by the ADA (0.05 mm), being significantly different from the other materials (P < 0.05), which had mean values for film thickness in accordance with the ADA`s recommendations. Regarding the solubility and disintegration, only Endofill (R) did not meet the ADA`s specifications and presented the worst results of all materials (P < 0.05). Sealer 26 (R) presented the greatest dimensional changes and differed significantly from all other sealers (P < 0.05). Biosealer had the lowest radiopacity values and was significantly different from the other sealers (P < 0.05). Conclusion The experimental sealer based on Copaifera multijuga oil-resin presented satisfactory results in the physicochemical tests required by the ADA.