88 resultados para carcass modifier
Resumo:
This study evaluated levels of digestible lysine and organic zinc for male Ross strain broilers from 1 to 11 days of age. It was used 1,050 chicks distributed in randomized block design, in 5 × 2 factorial scheme, with seven repetitions of 15 birds per experimental unit. The dietary concentrations of digestible lysine were 0.90; 1.00; 1.10; 1.20; and 1.40% combined with 43 and 253 ppm zinc chelate. The diets contained 2,965 ± 18 kcal/kg of apparent metabolizable energy (AME) and 21.48 ± 0.18% of CP. It was determined chemical composition, protein, lipid, mineral and water depositions on carcass and empty body. There was no interaction among the factors digestible lysine and organic zinc. Effect of zinc concentration increase was observed on greatest deposition of body fat, indicating that there is interference in lipid metabolism of the birds in the studied phase. The most pronounced effects resulted from the dietary inclusion of lysine. There was a linear effect on reconstituted body weight as a response to the increase of dietary lysine, which suggests equal or superior requirement to the greatest studied level. However, the deposition of water and protein on the carcass had a quadratic increase, characterizing higher muscle mass accumulation up to the levels 1.25 and 1.27 of this amino acid in the diet. Considering the studied strain, broiler chickens from the first to the 11th days of age require 1.28 ± 0.01% of digestible lysine, according to the deposition of muscle mass.
Resumo:
O presente estudo objetivou avaliar o efeito do desmame precoce sobre a composição corporal e sobre parâmetros indicativos do estado nutricional de camundongos. O grupo experimental consistiu de camundongos Swiss Webster, machos, desmamados precocemente (14º dia de vida) e alimentados com ração apropriada para roedores em crescimento até o 21º dia pós-natal (grupo DESM). O grupo controle consistiu de camundongos amamentados até o 21º dia pós-natal (grupo CON). Todos os animais foram sacrificados no 21º dia de vida. O grupo DESM apresentou redução da concentração e conteúdo hepático e muscular de proteínas, da concentração cerebral de proteínas, da concentração e conteúdo cerebral de DNA e da razão proteína/RNA hepática e muscular (p<0,05). Quanto à composição corporal, o grupo DESM apresentou maior conteúdo de umidade, maior percentual de umidade e lipídios e menor conteúdo e percentual de cinzas e proteína na carcaça (p<0,05). Os resultados indicam que o desmame precoce acarreta em prejuízo à composição corporal e a parâmetros indicativos do estado nutricional, o que pode estar relacionado ao retardo do processo de maturação química. Os dados do presente estudo podem contribuir para o entendimento da influência da alimentação com fórmulas infantis sobre a composição corporal e sobre o estado nutricional.
Resumo:
Background The relationship between birth weight and plasma lipoproteins is inconsistent. Aims To assess the association between birth weight and (1) body mass index (BMI) at birth and (2) lipoproteins in young adults, and also to explore the possible effect of current obesity as a possible effect modifier. Methods Two prospective studies based on representative samples of subjects born in the 1970s were carried out in Ribeirao Preto, Brazil (n = 2063) and Limache, Chile (n = 999). The surveys were carried out between 2001 and 2004. Results Mean birth weights were 3267 g and 3177 g and mean adult BMIs were 24.3 kg/m(2) and 25.8 kg/m(2) in the Brazilian and Chilean samples, respectively. Total adult cholesterol was 4.57 mmol/l in Chileans, 0.26 mmol/l higher than in Brazilians (p < 0.001). The main finding was an interaction between adult obesity (BMI 30 or over) and birth weight and also BMI at birth and low-density lipoprotein (LDL) and total cholesterol. A birth-weight increment of 1 kg was associated with a decrease in total cholesterol (-0.374 mmol/l, 95% CI -0.567 to -0.181) and LDL (-0.304 mmol/l (-0.479 to -0.129) in obese participants only. These associations persisted after allowing for gestational age in a smaller sample. This finding was consistent in separate analyses in the Brazilian and Chilean samples. No associations were found in relation to high-density lipoprotein and triglyceride concentrations. Conclusion The results suggest that those who were of low birth weight and are obese are more likely to have high cholesterol and LDL concentrations. Thus preventing obesity may be especially rewarding in subjects with a low birth weight.
Resumo:
Marfan syndrome is an autosomal dominant disease of connective tissue caused by mutations in the fibrillin-1 encoding gene FBN1. Patients present cardiovascular, ocular and skeletal manifestations, and although being fully penetrant, MFS is characterized by a wide clinical variability both within and between families. Here we describe a new mouse model of MFS that recapitulates the clinical heterogeneity of the syndrome in humans. Heterozygotes for the mutant Fbn1 allele mg Delta(loxPneo), carrying the same internal deletion of exons 19-24 as the mg Delta mouse model, present defective microfibrillar deposition, emphysema, deterioration of aortic wall and kyphosis. However, the onset of a clinical phenotypes is earlier in the 129/Sv than in C57BL/6 background, indicating the existence of genetic modifiers of MFS between these two mouse strains. In addition, we characterized a wide clinical variability within the 129/Sv congenic heterozygotes, suggesting involvement of epigenetic factors in disease severity. Finally, we show a strong negative correlation between overall levels of Fbn1 expression and the severity of the phenotypes, corroborating the suggested protective role of normal fibrillin-1 in MFS pathogenesis, and supporting the development of therapies based on increasing Fbn1 expression.
Resumo:
We examined whether single-nucleotide polymorphisms (SNPs) in the calpain (CAPN) and calpastatin (CAST) genes, described from Bos primigenius taurus, are polymorphic in Nellore cattle. We also looked for a possible association of linkage disequilibrium of this polymorphism with tenderness of the longissimus dorsi muscle after 7, 14 and 21 days of postmortem aging in 638 purebred Nellore bulls. Meat tenderness was measured as Warner-Bratzler shear force. Additive and dominance effects were tested for SNPs of the three genotypic classes; the substitution effect was tested for SNPs with missing genotypic classes. Genotypic and gene frequencies were also calculated for the different SNPs. An increase in tenderness was observed from 7 to 21 days; the average values for shear force at 7, 14 and 21 days of aging were 5.92 +/- 0.06, 4.92 +/- 0.05, and 4.38 +/- 0.04 kg, respectively. All markers showed polymorphism, but there was no CC genotype for CAPN316, and few animals showed the AA genotype for CAPN530. The alleles CAPN4751, UOGCAST1, and WSUCAST were found to have additive and dominance effects for shear force at 7, 14 and 21 days, while CAPN316 showed a substitution effect for shear force at 7 and 21 days. An additive-by-additive epistatic interaction was observed between CAPN4751 and markers on the CAST gene. In conclusion, these markers should be considered for use in breeding programs.
Resumo:
Selection of zebu (Bos indicus) beef and dairy cattle in Brazil and the validation process of genetic markers for growth, carcass and meat quality traits and also for milk production, fat and protein milk content are discussed as concerned to the concepts and details of their use as auxiliary tools in selection processes. It is highlighted, also, the importance of right selection of ova donor cows for production of embryos to be transferred.
Resumo:
We compared carcass and meat quality of pigs from the same sire line and two different dam lines, one that included Chinese breeds and one that did not. Line A consisted of 1/4 Landrace, 1/2 Large White, 1/8 Chinese breeds (Meishan, Fengjing, Jiaxing), and 1/8 Large White, Duroc and Pietrain, and line B consisted of 1/2 Large White and 1/2 Pietrain. The animals (N = 144) were slaughtered at a live weight of 108 kg. Backfat thickness, percentage of lean meat, pH 24 h after slaughter, meat color, percentage of drip loss, and percentage of intramuscular fat were measured and compared using analysis of variance in a completely randomized design; the BioEstat 5.0 test was applied for the comparison of means at a significance level of 5% for all analyses. Backfat was significantly lower for line A (12.78 mm) than for line B (15.90 mm). The pH measured 24 h after slaughter was significantly lower in line A (5.68) compared to line B (5.84). Percent lean meat was significantly higher for line A (61.21%) compared to line B (59.72%). Percentage drip loss was significantly higher in line A (2.73%) than in line B (2.23%). Percentage intramuscular fat and meat color were not significantly different between the lines. The inclusion of Chinese breeds produced a higher percentage of lean meat and reduced fat thickness, along with increased heterosis, which are important characteristics for breeding programs.
Resumo:
This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI center dot NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI center dot PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 degrees C, 200 degrees C and 250 degrees C with mean diameters of 8, 10 and 15 nm, respectively. However, the thermal decomposition of Fe(Acac)(3) performed in a conventional high boiling point solvent (diphenyl ether, bp 259 degrees C), under a similar Fe to oleylamine molar ratio used in the IL synthesis, does not follow the same growth mechanism and rendered only smaller NPs of 5 nm mean diameter. All MNPs are covered by at least one monolayer of oleylamine making them readily dispersible in non-polar solvents. Besides the influence on the nanoparticles growth, which is important for the preparation of highly crystalline MNPs, the IL was easily recycled and has been used in at least 20 successive syntheses.
Resumo:
The electrocatalytic reduction of hydrogen peroxide on a glassy carbon (GC) electrode modified with a ruthenium oxide hexacyanoferrate (RuOHCF) was investigated using rotating disc electrode (RDE) voltammetry aiming to improve the performance of the sensor for hydrogen peroxide detection. The influence of parameters such as rotation speed, film thickness and hydrogen peroxide concentration indicated that the rate of the cross-chemical reaction between Ru(II) centres immobilized into the film and hydrogen peroxide controls the overall process. The kinetic regime could be classified as LSk mechanism, according to the diagnostic table proposed by Albery and Hillman, and the kinetic constant of the mediated process was found to be 706 mol(-1) cm(3) s(-1). In the LSk case the reaction layer is located at a finite layer close to the modifier layer/solution interface
Resumo:
In this work a simple and reliable method for the simultaneous determination of Cr, Fe, Ni and V in crude oil, using emulsion sampling graphite furnace atomic absorption spectrometry is proposed. Under the best conditions, sample masses around 50 mg were weighed in polypropylene tubes and emulsified in a mixture of 0.5% (v v(-1)) hexane + 6% (m v(-1)) Triton X-100 (R). Considering the compromised conditions, the pyrolysis an atomization temperatures for the simultaneous determination of Cr, Fe, Ni and V were 1400 degrees C and 2500 degrees C, respectively. Aliquots of 20 mu L of reference solution and sample emulsion were co-injected into the graphite tube with 10 mu L of 1.0 g L(-1) Mg(NO(3))(2) as chemical modifier. The detection limits (n = 10, 3 sigma) and characteristic masses were, respectively: 0.07 mu g g(-1) and 19 pg for Cr; 2.15 mu g g(-1) and 31 pg for Fe; 1.25 mu g g(-1) and 44 pg for Ni; and 1.15 mu g g(-1) and 149 pg for V. The reliability of the proposed method was checked by fuel oil Standard Reference Material (SRMTriton X-100 (R) 1634c - NIST) analysis. The concentrations found presented no statistical differences compared to the certified values at 95% confidence level.
Resumo:
Recent surveys have identified anthelmintic effects from many bioactive substances particularly from condensed tannin (CT) sources. The aims of the present study were to investigate the potential anthelmintic effects of condensed tannins (CT) on Trichostrongylus colubriformis in experimentally infected sheep and the nutritional consequences on animals. Twenty helminth-free lambs were divided into five groups of four animals. Groups I to IV were artificially infected with 6,000 third stage larvae (L3) of T. colubriformis. Group I was the infected control and group V was the uninfected control. Twenty-eight days post-infection (p.i.) lambs from GII were supplemented with tanniniferous sorghum (350 g/animal/day, during seven days); GIII were drenched with Acacia mearnsii extract (15% CT) for just one day and GIV during two days (1.6 g extract/kg BW). At day 36 p.i., animals from infected group (GI to GIV) were slaughtered. Faecal egg counts (FEC) values present a reduction on GII when compared with GI at day 29 p.i. (P < 0.05) and between GIII and GI at day 35 and 36 p.i. (P < 0.05). The values of egg hatchability and number of L3 recovered from the faeces were not statistical analyzed (there was no duplicate data), however there was a considerable reduction between the values from treated and control group. The use of CT on diet did not cause significant difference on blood parameters, body-weight and carcass-weight (P > 0.05). No difference was related on total worm burden between treatments; however, GIV presented lower number of females than GI (P < 0.05). The use of CT could be a promising alternative source to reduce the pasture contamination and to control T. colubriformis infection in sheep.
Resumo:
Intense physical training and dietary energy restriction have been associated with consequences such as nutritional amenorrhea. We investigated the effects of intense physical training, food restriction or the combination of both strategies on estrous cyclicity in female rats, and the relationship between leptin ad these effects. Twenty-seven female Wistar rats were distributed into four groups: SF: sedentary, fed ad libitum; SR: sedentary subjected to 50% food restriction (based on the food intake of their fed counterparts); TF: trained (physical training on a motor treadmill with a gradual increase in speed and time), fed ad libitum; TR; trained with 50% food restriction. We analysed estrous cyclicity, plasma leptin and estradiol as well as chemical composition of the carcass, body weight variation. and weight of ovaries and perirenal adipose tissue. Data demonstrate that physical training alone was not responsible for significant modifications in either carcass chemical composition or reproductive function. Food restriction reduced leptin levels in all animals and interrupted the estrous cyclicity in some animals, but only the combination of food restriction and physical training was capable of interrupting the estrous cyclicity in all animals. Leptin was not directly related to estrous cyclicity. From our findings, it may be concluded that there is an additive or synergistic effect of energy intake restriction and energy expenditure by intense physical training on estrous cyclicity. Leptin appears to be one among others factors related to estrous cycle, but it probably acts indirectly.
Resumo:
The influence of granulometry and organic treatment of a Brazilian montmorillonite (MMT) clay on the synthesis and properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites was studied. Hybrid latexes of poly(styrene-co-butyl acrylate)/MMT were synthesized via miniemulsion polymerization using either sodium or organically modified MMT. Five clay granulometries ranging from clay particles smaller than 75 mu m to colloidal size were selected. The size of the clay particles was evaluated by Specific surface area measurements (BET). Cetyl trimethyl ammonium chloride was used as an organic modifier to enhance the clay compatibility with the monomer phase before polymerization and to improve the clav distribution and dispersion within the polymeric matrix after polymerization. The sodium and organically modified natural clays as well as the composites were characterized by X-ray diffraction analysis. The latexes were characterized by dynamic light scattering. The mechanical, thermal, and rheological properties of the composites obtained were characterized by dynamical-mechanical analysis, thermogravimetry, and small amplitude oscillatory, shear tests, respectively. The results showed that smaller the size of the organically modified MMT, the higher the degree of exfoliation of nanoplatelets. Hybrid latexes in presence of Na-MMT resulted in materials with intercalated structures. (C) 2009 Wiley, Periodicals, Inc. J Appl Polym Sci 112: 1949-1958, 2009
Resumo:
The influence of the addition of high-impact polystyrene (HIPS) on polypropylene (PP) photodegradation was studied with blends obtained by extrusion with and without styrene-butadiene-styrene (SBS) copolymer (10 wt % with respect to the dispersed phase). The concentrations of HIPS ranged from 10 to 30 wt %. The blends and pure materials were exposed for periods of up to 15 weeks of UV irradiation; their mechanical properties (tensile and impact), fracture surface, and melt flow indices were monitored. After 3 weeks of UV exposure, all of the materials presented mechanical properties of the same order of magnitude. However, for times of exposure greater than 3 weeks, an increasing concentration of HIPS resulted in a better photostability of PP. These results were explained in light of morphological observations. This increase of photostability was even greater when SBS was added to the blends. It was more difficult to measure the melt flow index of the binary PP/HIPS blends than that of PP for low concentrations of HIPS; this was most likely due to energy transfer between the blend domains during photodegradation. This phenomenon was not observed for the ternary blends. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: 770-779, 2011
Resumo:
Color, pH, shear force, water-holding capacity, chemical composition, cholesterol content, and fatty acid profile from conventional, free-range and alternative broiler breast meat were determined in order to evaluate differences in the quality of broiler meat produced under different systems. Broilers reared in a conventional system had the highest lipid content (1.3%) but lower proportions of polyunsaturated (17.3%) and omega-3 fatty acids (0.3%) (p<0.05) compared to free-range and alternative broilers. On the other hand, free-range broilers had a lower cholesterol content (48.6 mg center dot 100 g(-1)) and lower pH (5.7 1) while broilers raised in an alternative system had a higher shear force (2.33 kgf) and lower yellowness value (b* value = 3.15) when compared to the other rearing systems (p<0.05).